Interface/connection dim's : DN150 acc. EN 1092-1 PN16
SFN-150-IF-02O-N-F1m-S-B-B
SKU: E0119190
Stock *: 0
Capacity: 70 m³/h (at 1m/s)
Build-in length: 360 mm
Weight: 80 kg
Very robust filter, suitable for filtering large ferrous contaminants of 1-50 mm out of coarse or high-capacity product flows under pressure, such as pulp in the paper industry. The magnets are placed on the outside of the product channel. Therefore the passage is completely free, enabling large parts to pass unobstructed.

Manual cleaning (wipe off)
Capture Fe particles from 1 - 50 mm
Flanges DN100-250 (EN 1092-1)
Max. 10 bar / 60 °C
Plate magnets on side (6,000 gauss)

Application

High-capacity & coarse product flows

This very robust magnetic filter is designed especially for larger capacities and coarser product flows.
 
An example of a common application is pulp in the paper industry.
 
Because the magnets are located outside the product stream, this filter permits better flow than filters with magnetic bars.
 
However, the magnetic contact is less, so that only larger ferrous particles will be filtered out.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
This industrial magnetic filter is equipped with plate magnets, placed on the sides of the product channel. This permits a better flow than filters with magnetic bars, because they are placed in the middle of the product flow.

2 Plate magnets outside product channel
Magnet quality N-35, 6,000 gauss on the magnet contact surface
Max. 10 bar / 60 °C
Inlet/outlet DN100 - 250 (EN 1092-1 PN16)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
2 strong neodymium plate magnets are positioned on the sides of the product channel. Here they attract passing ferromagnetic contaminants. The captured ferrous particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
After the product stream is stopped, you swing the magnets outwards. Now wipe them clean by hand.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet units
Swing the magnet units outwards as far as possible
Wipe clean the magnet with a soft cloth and - if necessary - a suitable cleaning fluid
Swing the magnet units back against the housing
Re-tighten the screw connections
Restart the product flow

Interface/connection dim's : DN200 acc. EN 1092-1 PN10
SFN-200-IF-02O-N-F1m-S-B-B
SKU: SZFN000360
Stock *: 0
Capacity: 110 m³/h (at 1m/s)
Build-in length: 460 mm
Weight: 115 kg
Very robust filter, suitable for filtering large ferrous contaminants of 1-50 mm out of coarse or high-capacity product flows under pressure, such as pulp in the paper industry. The magnets are placed on the outside of the product channel. Therefore the passage is completely free, enabling large parts to pass unobstructed.

Manual cleaning (wipe off)
Capture Fe particles from 1 - 50 mm
Flanges DN100-250 (EN 1092-1)
Max. 10 bar / 60 °C
Plate magnets on side (6,000 gauss)

Application

High-capacity & coarse product flows

This very robust magnetic filter is designed especially for larger capacities and coarser product flows.
 
An example of a common application is pulp in the paper industry.
 
Because the magnets are located outside the product stream, this filter permits better flow than filters with magnetic bars.
 
However, the magnetic contact is less, so that only larger ferrous particles will be filtered out.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
This industrial magnetic filter is equipped with plate magnets, placed on the sides of the product channel. This permits a better flow than filters with magnetic bars, because they are placed in the middle of the product flow.

2 Plate magnets outside product channel
Magnet quality N-35, 6,000 gauss on the magnet contact surface
Max. 10 bar / 60 °C
Inlet/outlet DN100 - 250 (EN 1092-1 PN16)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
2 strong neodymium plate magnets are positioned on the sides of the product channel. Here they attract passing ferromagnetic contaminants. The captured ferrous particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
After the product stream is stopped, you swing the magnets outwards. Now wipe them clean by hand.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet units
Swing the magnet units outwards as far as possible
Wipe clean the magnet with a soft cloth and - if necessary - a suitable cleaning fluid
Swing the magnet units back against the housing
Re-tighten the screw connections
Restart the product flow

Interface/connection dim's : DN250 acc. EN 1092-1 PN10
SFN-250-IF-02O-N-F1m-S-B-B
SKU: SZFN001160
Stock *: 0
Capacity: 150 m³/h (at 1m/s)
Build-in length: 500 mm
Weight: 143 kg
Very robust filter, suitable for filtering large ferrous contaminants of 1-50 mm out of coarse or high-capacity product flows under pressure, such as pulp in the paper industry. The magnets are placed on the outside of the product channel. Therefore the passage is completely free, enabling large parts to pass unobstructed.

Manual cleaning (wipe off)
Capture Fe particles from 1 - 50 mm
Flanges DN100-250 (EN 1092-1)
Max. 10 bar / 60 °C
Plate magnets on side (6,000 gauss)

Application

High-capacity & coarse product flows

This very robust magnetic filter is designed especially for larger capacities and coarser product flows.
 
An example of a common application is pulp in the paper industry.
 
Because the magnets are located outside the product stream, this filter permits better flow than filters with magnetic bars.
 
However, the magnetic contact is less, so that only larger ferrous particles will be filtered out.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
This industrial magnetic filter is equipped with plate magnets, placed on the sides of the product channel. This permits a better flow than filters with magnetic bars, because they are placed in the middle of the product flow.

2 Plate magnets outside product channel
Magnet quality N-35, 6,000 gauss on the magnet contact surface
Max. 10 bar / 60 °C
Inlet/outlet DN100 - 250 (EN 1092-1 PN16)
Finish: grit blasted
Materials - in contact with product: AISI316(L)
Material gaskets: Silicone acc. EC1935 / FDA


Options

Available accessories & spare parts

Click on a product variant to find the online available accessories & spare parts.

Working principle

Filtering & discharging of ferrous impurities

How does the magnetic filtering work?
2 strong neodymium plate magnets are positioned on the sides of the product channel. Here they attract passing ferromagnetic contaminants. The captured ferrous particles stick to the magnets, while the purified product flows further.
 
How does the cleaning / iron discharging work?
After the product stream is stopped, you swing the magnets outwards. Now wipe them clean by hand.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the srew connections of the magnet units
Swing the magnet units outwards as far as possible
Wipe clean the magnet with a soft cloth and - if necessary - a suitable cleaning fluid
Swing the magnet units back against the housing
Re-tighten the screw connections
Restart the product flow

Product inlet/-outlet diameter : 100 mm
SPP-0-TC-FO-S4-B-BB
SKU: SPPE000160
Stock: 8
Type: PM0
Max. capacity: 10 m³/h
Build-in length: 570 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 150 mm
SPP-1-TC-FO-S4-B-BB
SKU: SPPE000161
Stock: 3
Type: PM1
Max. capacity: 28 m³/h
Build-in length: 680 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 200 mm
SPP-2-TC-FO-S4-B-BB
SKU: SPPE000162
Stock: 1
Type: PM2
Max. capacity: 60 m³/h
Build-in length: 792 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 250 mm
SPP-3-TC-FO-ST-B-BB
SKU: SPPE000063
Stock: 4
Type: PM3
Max. capacity: 100 m³/h
Build-in length: 950 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 300 mm
SKU
SPPE000064: Stock
7: Type
PM4: Max. capacity
140 m³/h: Build-in length
1000 mm:

Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 400 mm
SPP-5-FI-FO-ST-B-BB
SKU: SPPE000065
Stock: 2
Type: PM5
Max. capacity: 250 m³/h
Build-in length: 1100 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 500 mm
SPP-6-FI-FO-ST-B-BB
SKU: SPPE000066
Stock *: 0
Type: PM6
Max. capacity: 380 m³/h
Build-in length: 1200 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 600 mm
SPP-7-FI-FO-ST-B-BB
SKU: SPPE000067
Stock *: 0
Type: PM7
Max. capacity: 550 m³/h
Build-in length: 1300 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 100 mm
SPP-0-TC-FJ-S4-B-BB
SKU: SPPE010160
Type: PM0
Max. capacity: 10 m³/h
Build-in length: 570 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 150 mm
SPP-1-TC-FJ-S4-B-BB
SKU: SPPE010161
Type: PM1
Max. capacity: 28 m³/h
Build-in length: 680 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 200 mm
SPP-2-TC-FJ-S4-B-BB
SKU: SPPE010162
Type: PM2
Max. capacity: 60 m³/h
Build-in length: 790 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 250 mm
SPP-3-TC-FJ-ST-B-BB
SKU: SPPE010063
Type: PM3
Max. capacity: 100 m³/h
Build-in length: 950 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 300 mm
SPP-4-FI-FJ-ST-B-BB
SKU: SPPE010064
Type: PM4
Max. capacity: 140 m³/h
Build-in length: 1000 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 216 mm
SPP-0-FC-FO-S4-B-BB
SKU: SPPF000160
Stock *: 0
Type: PM0 - Without tapered in-/outlet
Max. capacity: 10 m³/h
Build-in length: 420 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 275 mm
SPP-1-FC-FO-S4-B-BB
SKU: SPPF000161
Stock *: 0
Type: PM1 - Without tapered in-/outlet
Max. capacity: 28 m³/h
Build-in length: 480 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 340 mm
SPP-2-FC-FO-S4-B-BB
SKU: SPPF000162
Stock *: 0
Type: PM2 - Without tapered in-/outlet
Max. capacity: 60 m³/h
Build-in length: 600 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 429 mm
SPP-3-FC-FO-ST-B-BB
SKU: SPPF000063
Stock *: 0
Type: PM3 - Without tapered in-/outlet
Max. capacity: 100 m³/h
Build-in length: 700 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 509 mm
SPP-4-FC-FO-ST-B-BB
SKU: SPPF000064
Stock *: 0
Type: PM4 - Without tapered in-/outlet
Max. capacity: 140 m³/h
Build-in length: 800 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 667 mm
SPP-5-FC-FO-ST-B-BB
SKU: SPPF000065
Stock *: 0
Type: PM5 - Without tapered in-/outlet
Max. capacity: 250 m³/h
Build-in length: 850 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 842 mm
SPP-6-FC-FO-ST-B-BB
SKU: SPPF000066
Stock *: 0
Type: PM6 - Without tapered in-/outlet
Max. capacity: 380 m³/h
Build-in length: 900 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/-outlet diameter : 1002 mm
SPP-7-FC-FO-ST-B-BB
SKU: SPPF000067
Stock *: 0
Type: PM7 - Without tapered in-/outlet
Max. capacity: 550 m³/h
Build-in length: 970 mm
Permanent bullet magnets have a powerful bullet-shaped ferrite magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries. Permanent bullet magnets have a lower installation height compared to electro bullet magnets. Yet, you have to clean them manually, where this is done automatically with the electro bullet magnets.

Ferrite magnet
Capture Fe particles from 50 µm
Manual cleaning (wipe off)
Overall height 420 to 1300 mm
ATEX II 1/2 D

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Permanent bullet/pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The magnet core filters the metal particles out of the product flow and retains them on three magnetic poles until they are cleaned.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: ferrite GSFD-33, 7000 gauss on magnet surface
Robust steel / stainless steel housing
Incl./excl. welded tapered in-/outlet
Flanges acc. DIN24154, or Jacob connections (only for tapered in-/outlet types)
Finish: painted
Dust explosion-proof Ex II 1/2D


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Options

Housing made of AISI316 stainless steel instead of 304
Door sensor (open/closed safety)
Upside-down versions for upwards ventilated product flows
Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Filtering & discharging of ferrous contaminants

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
You have to remove the captured ferrous particles manually. After having stopped the product flow, you can open the door. Then turn the magnet around its own axis, while wiping the magnet clean.
 
Cleaning / iron discharging sequence

Stop the product flow
Loosen the fastener clamps
Put on sturdy work gloves
Open the door as far as possible
Wipe clean the magnet core while turning it around its axle
Catch the removed ferrous particles and dicharge them
Re-tighten the fastener clamps
Restart the product flow

Product inlet/outlet size : Ø250 mm
SPA-3-V-TC-FO-ST-NA-D-B
SKU: SPEA001063
Stock: 1
Max. capacity: 100 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø300 mm
SPA-4-V-FI-FO-ST-NA-D-B
SKU: SPEA001064
Stock *: 0
Max. capacity: 150 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø400 mm
SPA-5-V-FI-FO-ST-NA-D-B
SKU: SPEA001065
Stock *: 0
Max. capacity: 230 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø500 mm
SPA-6-V-FI-FO-ST-NA-D-B
SKU: SPEA001066
Stock *: 0
Max. capacity: 350 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø600 mm
SPA-7-V-FI-FO-ST-NA-D-B
SKU: SPEA001067
Stock *: 0
Max. capacity: 500 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø250 mm
SPA-3-V-TC-FO-ST-Ex-D-B
SKU: SPAA001063
Stock *: 0
Max. capacity: 100 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø300 mm
SPA-4-V-FI-FO-ST-Ex-D-B
SKU: SPAA001064
Stock *: 0
Max. capacity: 150 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø400 mm
SPA-5-V-FI-FO-ST-Ex-D-B
SKU: SPAA001065
Stock *: 0
Max. capacity: 230 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø600 mm
SPA-7-V-FI-FO-ST-Ex-D-B
SKU: SPAA001067
Stock *: 0
Max. capacity: 500 m³/h
Including: Integrated valve box for Fe-parts disposal
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø250 mm
SPA-3-B-TC-FO-ST-NA-D-B
SKU: SPEB000063
Stock *: 0
Max. capacity: 100 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø300 mm
SPA-4-B-FI-FO-ST-NA-D-B
SKU: SPEB000064
Stock *: 0
Max. capacity: 150 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø400 mm
SPA-5-B-FI-FO-ST-NA-D-B
SKU: SPEB000065
Stock *: 0
Max. capacity: 230 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø500 mm
SPA-6-B-FI-FO-ST-NA-D-B
SKU: SPEB000066
Stock *: 0
Max. capacity: 350 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø600 mm
SPA-7-B-FI-FO-ST-NA-D-B
SKU: SPEB000067
Stock *: 0
Max. capacity: 500 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø250 / #240 mm
SPA-3-B-TC-OS-ST-NA-D-B
SKU: SPEE000063
Stock *: 0
Max. capacity: 100 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø300 / #320 mm
SPA-4-B-FI-OS-ST-NA-D-B
SKU: SPEE000064
Stock *: 0
Max. capacity: 150 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø400 / #400 mm
SPA-5-B-FI-OS-ST-NA-D-B
SKU: SPEE000065
Stock *: 0
Max. capacity: 230 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø500 / #500 mm
SPA-6-B-FI-OS-ST-NA-D-B
SKU: SPEE000066
Stock *: 0
Max. capacity: 350 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø250 mm
SPA-3-B-TC-FO-ST-Ex-D-B
SKU: SPAB000063
Stock *: 0
Max. capacity: 100 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø300 mm
SPA-4-B-FI-FO-ST-Ex-D-B
SKU: SPAB000064
Stock *: 0
Max. capacity: 150 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø400 mm
SPA-5-B-FI-FO-ST-Ex-D-B
SKU: SPAB000065
Stock *: 0
Max. capacity: 230 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø500 mm
SPA-6-B-FI-FO-ST-Ex-D-B
SKU: SPAB000066
Stock *: 0
Max. capacity: 350 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø250 / #240 mm
SPA-3-B-TC-OS-ST-Ex-D-B
SKU: SPAE000063
Stock *: 0
Max. capacity: 100 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø300 / #320 mm
SPA-4-B-FI-OS-ST-Ex-D-B
SKU: SPAE000064
Stock *: 0
Max. capacity: 150 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø400 / #400 mm
SPA-5-B-FI-OS-ST-Ex-D-B
SKU: SPAE000065
Stock *: 0
Max. capacity: 230 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø500 / #500 mm
SPA-6-B-FI-OS-ST-Ex-D-B
SKU: SPAE000066
Stock *: 0
Max. capacity: 350 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Product inlet/outlet size : Ø600 / #550 mm
SPA-7-B-FI-OS-ST-NA-D-B
SKU: SPEE000067
Stock *: 0
Max. capacity: 500 m³/h
Electro bullet magnets have a powerful bullet-shaped electromagnetic magnet core. They are suitable for filtering medium to large ferrous contaminants from high capacity coarse free-fall bulk flows.Often used in eg. the bulk, animal feed, plastics, ceramics and recycling industries.Electro bullet magnets are automatic cleaning, which makes them suitable for automatic production processes. Because they need a valve box, their installation height is much larger than that of the permanent bullet magnets.

Electromagnet
Capture Fe particles from 0.1 mm
Automatic cleaning (discontinuous)
Overall height 950 to 2433 mm
ATEX II 1/2 D possible

Application

Filtering iron contamination out of high capacity coarse product streams

For filtering ferrous contaminants – such as iron and steel – out of granulates, fibres and coarser materials in high capacity non-pressurized pipelines.
 
Bullet magnets are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Short description
Electro bullet magnets have a large, cylindrical electromagnet core, with a powerful, deeply penetrating magnetic field. The magnetic core has 3 magnetic poles on which trapped ferrous particles are held. The magnetic core can be switched on / off electrically. A valve box is mounted under the pipe magnet in order to be able to automatically discharge the falling ferrous particles.
 
Summary of important specifications

1 bullet-shaped magnet with 60° top cone
Magnet quality: 2000 gauss on magnet surface
Robust steel / stainless steel housing
Finish: painted
Incl. door sensor (open/close safety switch)
Incl. control box
Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)


Options

Available accessories & options

Online accessories & spare parts
Click on a product variant to find the online available accessories & spare parts.
 
Default versions

Incl./excl. ATEX II 1/2D certificate (dust-explosion safe)
Incl./excl. valve box for iron disposal
Round or square outlet flange (for types excl. valve box)

Options

Magnet iron saturation signaller 'Met-alert Watch dog'
Kobaflex PU protective coating


Working principle

Cleaning / disposal of caught metal contaminations

How does the magnetic filtering work?
Because the magnetic core is located in the middle of the product stream, the bullet magnet has a very high separation yield. The round shape of the housing and the magnetic core (with a 60° top cone) ensures continuous flow and good distribution of the product stream. The product then passes three powerful magnetic fields, where guide strips redirect any product near the outer walls back toward the magnetic core.
 
The magnets attract passing ferrous particles. The captured particles stick to 1 of the 3 magnet poles, while the purified product flows further.
 
How does the cleaning / iron discharging work?
Fully automatic cleaning. After you have stopped the product flow, give the start signal for the cleaning. The magnetic core is switched off electrically during cleaning. The valve box automatically discharges the falling ferrous particles.
 
Cleaning / iron discharging sequence

Stop the product flow
Give the start signal for a cleaning cycle locally, or from your central control
a. The valve box is switched to iron discharging position
b. The magnet is switched off
c. The captured ferrous particles fall off and are discharged via the valve box
d. The valve box is switched back to production position
e. The magnet is switched on again
Restart the product flow

Magnet dimensions : 230x204x55 mm
SCH-M-N-204x55-0250-B-B-B
SKU: E0015853
Stock *: 0
Width: 388 mm
Height: 520 mm
Weight: 36 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Magnet dimensions : 280x204x55 mm
SCH-M-N-204x55-0300-B-B-B
SKU: E0013100
Stock *: 0
Width: 438 mm
Height: 520 mm
Weight: 41 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Magnet dimensions : 330x204x55 mm
SCH-M-N-204x55-0350-B-B-B
SKU: E0015814
Stock *: 0
Width: 490 mm
Height: 520 mm
Weight: 45 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.

Magnet dimensions : 380x204x55 mm
SCH-M-N-204x55-0400-B-B-B
SKU: E0014217
Stock *: 0
Width: 538 mm
Height: 520 mm
Weight: 50 kg
Chute magnets are neodymium plate magnets with a hinged extractor plate and a mounting construction for self-mounting the systeem against the wall of your product channel.They are used for removal of ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes up to 45°.

With neodymium plate magnets
Max. holding field 180 mm
Capture Fe particles from 0.5 mm
Quick cleaning through use of extractor plates
Max. chute angle 45°

Application

Free-fall and chute transport

Chute magnets are mainly used for removing ferrous contaminants from powders, granulates, and even coarser raw material flows in free-fall pipes or chutes with a sliding angle of max. 45˚.
 
Chute magnets are a simple solution for removing iron contamination. You can easily install them yourself, and they deliver a high separation efficiency. We default use neodymium magnetic plates, because they are extremely powerful, compact and lightweight.

Design

Construction & materials data

Click on a product variant to find the data sheet, drawings and other downloadable product information.
 
Description
Chute magnets have robust neodymium magnetic plates that are placed behind a stainless steel extractor plate. 2 quick-release fasteners clamp the magnet with extractor plate against the pipe channel.
 
Summary of important specifications

Materials system and magnet casing: stainless steel
Finish: grit blasted,
Material seals: EPDM, FDA-approved


Options

Available versions, options & accessories

Click on a product variant to find the online available accessories & spare parts.

Cleaning

Filtering & discharging of ferrous contaminants

You can clean the chute magnet through use of the hinged extractor plate for quick-cleaning. When you swing the hinged extractor plate away from the magnet, the ferrous particles will fall off of the extractor plate as soon as they are far enough away from the magnet.
 
For reasons of safety, the operator must operate the chute magnets with two hands. The magnets are secured in the outermost cleaning position, after which the operator has both hands free for cleaning.