Ball valve, Butterfly handle, Basic design, IT/ET, nickel-plated brass, Operating temp. -20 °C to 150 °C, G 1 1/4, PN max. 30 bar
Applications: Compressed air, water, non-toxic and non-corrosive gases, heating systems and air conditioning systems.
Pressure display »lineonline«, Hose - hose, for hose Ø 6 mm, Operating pressure 2 - 10 bar
When there is no pressure, the clear bell looks empty.
When there is pressure, a red signal appears.
3/2-way toggle lever valve, Hose side, Quick connector Hose G 1/4 IT, G 1/4, PN max. 8 bar, Temp. 0°C to 70°C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.
Unidirectional flow control valve »lineonline«, Flow one-sided, Hose - thread, G 1/4, for hose Ø 8, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.
3/2-way toggle lever valve, Hose side, Quick connector Hose 6/4, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.
Filling valve (start-up valve) »FUTURA«, Size 4, G 3/4, Input pressure 2.5 - 16 bar, Temperature -10 °C to 50 °C
Seat valves operated by secondary pressure for controlled pressurisation of pneumatic systems.
These valves prevent a sudden build-up of pressure accompanied by dangerous, jerky cylinder movements.
The full cross-section of the regulator is opened at 50% of the input pressure.
The filling time can be altered by turning the adjusting screw.
Unidirectional flow control valve »lineonline«, Flow one-sided, Thread - hose, G 1/4, for hose Ø 8, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.
3/2-way toggle lever valve, Hose side, Quick connector Hose 8/6, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.
Filling valve (start-up valve) »FUTURA«, Size 4, G 1, Input pressure 2.5 - 16 bar, Temperature -10 °C to 50 °C
Seat valves operated by secondary pressure for controlled pressurisation of pneumatic systems.
These valves prevent a sudden build-up of pressure accompanied by dangerous, jerky cylinder movements.
The full cross-section of the regulator is opened at 50% of the input pressure.
The filling time can be altered by turning the adjusting screw.
3/2-way toggle lever valve, Hose side, Quick connector Hose 10/8, G 1/4, PN max. 8 bar, Temp. 0 °C to 70 °C, nickel-plated brass
Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.
Pressure reducing valve, G 1/4 interior / exterior, AF 17, Set pressure 3 bar, Input pressure max. 15 bar, Material: Brass
Industry, trade and repair shops often require working pressures of 15 bar or less.
These pressure reducing valves, which are screwed directly onto the tool, enable that the pressure can be reduced to the selected working pressure.
Benefits:
- Significantly reduced risk of accidents
- Longer tool life with fewer malfunctions
- Lower noise levels at the workplace
Safety ball valve, lockable, Venting hole G 1/4, nickel-plated brass, Operating temp. -10°C to 100°C, Rp 2, DN 50, PN max. 14 bar
Safety ball valves, two parts, made of nickel-plated brass.
Specially designed for pneumatic applications.
The valve shuts off the supply line and bleds the application area.
Lockable hand lever in closed position ensures a high protection against manipulation.
Ball valve fine adjustment, Potable water, nickel-plated bright brass, Temp. -15°C to 120°C, Rp 1 1/2, DN 40, PN max 40 bar
Brass ball valves in the standard series with fine adjustment.
Unlike our classic standard ball valves (open-close function), this model features a special stem technology that allows finely modulated opening and closing of the line.
The flow rate can be regulated extremely precisely as a result.
The cock is made of low-lead brass with a bare brass surface on the inside. It is thus safe to use with drinking water. This valve complies with the European standard EN 13828 and the working paper DVGW W 570.
Pressure reducing valve, G 1/4 interior / exterior, AF 17, Set pressure 4 bar, Input pressure max. 15 bar, Material: Brass
Industry, trade and repair shops often require working pressures of 15 bar or less.
These pressure reducing valves, which are screwed directly onto the tool, enable that the pressure can be reduced to the selected working pressure.
Benefits:
- Significantly reduced risk of accidents
- Longer tool life with fewer malfunctions
- Lower noise levels at the workplace
Ball valve 3/2-way »FUTURA«, lockable, Size 1, G 1/4, Exhaust G 1/4, Input pressure max. 16 bar, Temperature -10 °C to 50 °C
Lockable ball valve, 3/2-way type including silencer, mechanically operated.
Rotary switch can be turned 90º, with indication of positions:
Horizontal: Input closed - outlet exhausted
Vertical: Flow open - exhaust closed
Exhaust air can be collected.
Pressure reducing valve, G 1/4 interior / exterior, AF 17, Set pressure 5 bar, Input pressure max. 15 bar, Material: Brass
Industry, trade and repair shops often require working pressures of 15 bar or less.
These pressure reducing valves, which are screwed directly onto the tool, enable that the pressure can be reduced to the selected working pressure.
Benefits:
- Significantly reduced risk of accidents
- Longer tool life with fewer malfunctions
- Lower noise levels at the workplace
Ball valve 3/2-way »FUTURA«, lockable, Size 1, G 3/8, Exhaust G 1/4, Input pressure max. 16 bar, Temperature -10 °C to 50 °C
Lockable ball valve, 3/2-way type including silencer, mechanically operated.
Rotary switch can be turned 90º, with indication of positions:
Horizontal: Input closed - outlet exhausted
Vertical: Flow open - exhaust closed
Exhaust air can be collected.
Pressure reducing valve, G 1/4 interior / exterior, AF 17, Set pressure 6 bar, Input pressure max. 15 bar, Material: Brass
Industry, trade and repair shops often require working pressures of 15 bar or less.
These pressure reducing valves, which are screwed directly onto the tool, enable that the pressure can be reduced to the selected working pressure.
Benefits:
- Significantly reduced risk of accidents
- Longer tool life with fewer malfunctions
- Lower noise levels at the workplace
3/2-way solenoid valve »lineonline« controlled venting, Hose - thread, G 1/4, Hose Ø 6, NO, 24 V DC, Operating pressure 2.5-7 bar
Though small in size, these valves are solenoid-piloted and feature very high performance.
Each valve comes complete with a monostable manual control and LED. Exhaust can be damped with a silencer or conveyed via a pipe fitting.
Function corresponds to the normal position of the valve.
3/2-way solenoid valve »lineonline« controlled venting, Hose - thread, G 1/4, Hose Ø 6, NC, 24 V DC, Operating pressure 2.5-7 bar
Though small in size, these valves are solenoid-piloted and feature very high performance.
Each valve comes complete with a monostable manual control and LED. Exhaust can be damped with a silencer or conveyed via a pipe fitting.
Function corresponds to the normal position of the valve.
3/2-way solenoid valve »lineonline« controlled venting, Hose - thread, G 1/8, Hose Ø 8, NO, 24 V DC, Operating pressure 2.5-7 bar
Though small in size, these valves are solenoid-piloted and feature very high performance.
Each valve comes complete with a monostable manual control and LED. Exhaust can be damped with a silencer or conveyed via a pipe fitting.
Function corresponds to the normal position of the valve.
3/2-way solenoid valve »lineonline« controlled venting, Hose - thread, G 1/8, Hose Ø 8, NC, 24 V DC, Operating pressure 2.5-7 bar
Though small in size, these valves are solenoid-piloted and feature very high performance.
Each valve comes complete with a monostable manual control and LED. Exhaust can be damped with a silencer or conveyed via a pipe fitting.
Function corresponds to the normal position of the valve.
Safety ball valve, lockable, Venting hole M5, nickel-plated brass, Operating temp. -10 °C to 100 °C, Rp 1/2, DN 15, PN max. 14 bar
Safety ball valves, two parts, made of nickel-plated brass.
Specially designed for pneumatic applications.
The valve shuts off the supply line and bleds the application area.
Lockable hand lever in closed position ensures a high protection against manipulation.
Check valve, DN 10, Brass, Soft sealed, Operating temperature 0 °C to 90 °C, G 3/8, PN max. 16 bar
Applications: Water (no steam), neutral and non-corrosive liquid media, mineral oils.
Only suitable for liquid media. Flap valve closes by gravity, therefore only possible to be installed horizontally!
3/2-way valve, Mechanically actuated, »M3«, Tappet, NC, G 1/4, Operating pressure 0 - 10 bar, Temperature range -20 °C to 70 °C
3/2-way valves
- Mechanically operated -
3/2-way valve, Mechanically actuated, »M3«, Tappet, NC, G 1/8, Operating pressure 0 - 10 bar, Temperature range -20 °C to 70 °C
3/2-way valves
- Mechanically operated -
5/2-way valve, Push button actuation, »3L« Control panel integration, G 1/4, Operating pressure 0-8 bar, Temp. range -20°C to 70°C
The hand lever latches when pushed or pulled.
Dirt strainer, bright brass, Sieve insert mesh width 0.2 mm, Operating temp. -20 °C to 110 °C, G 1, DN 25, PN max. 20 bar
Suitable for domestic water services, heating and air conditioning plants or compressed air systems. Not suitable for steam.
5/2-way valve, Push button actuation, »3L« Control panel integration, G 1/8, Operating pressure 0-8 bar, Temp. range -20°C to 70°C
The hand lever latches when pushed or pulled.
5/2-way valve man. 90° lever bistable, G1/2, Operating pressure max. vacuum 10 bar, Operating temp. -10 °C to 60 °C
These pilot valves are also suitable for max. vacuum 10 bar.
5/2-way valve, electropneumatic, »4V«, monostable, G 3/8, 24 V DC, Operating pressure 1.5 - 8 bar, Temp. -20 °C to 70 °C
5/2-way pilot valves
- Electro-pneumatic -
Multi-base plate for the way valves, Base plate for 10 valve positions, for valves connection G 1/8
Light alloy manifold bases for 2 to 10 valve positions.
5/2-way valve, electropneumatic, »4V«, monostable, G 3/8, 230 V, 50 Hz, Operating pressure 1.5 - 8 bar, Temp. -20 °C to 70 °C
5/2-way pilot valves
- Electro-pneumatic -