Screw-in hose connector, R 1/2 o., for hose I.D. 13, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Reducing nipple, G 3/4 o., G 1/2 i., AF 30, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Reducing nipple, Long design, ET G 3/8, IT G 1/4, AF 19, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Straight Push-in fitting »Blue Series«, Self-locking, G 3/4 o., for hose exterior Ø 10 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.
Straight push-in connector reducing »click-clock«, M20x1, for hose exterior Ø 10/12 mm, Working pressure max. 16 bar
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.
Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation
T-connection »value line«, for hose exterior Ø 10 mm, Operating pressure max. 16 bar, Operating temperature -20 °C to 70 °C
Low-priced yet very high-quality series of push-in fittings made of nickel-plated brass.
Compact, space-saving, lightweight design. An O-ring in the fillet at the end of the thread guarantees a tight connection for all male thread parts, even on rough surfaces.
Reducing nipple, Long design, ET G 3/8, IT G 1/2, AF 24, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Push-in L-fitting, rotating, R 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
Straight push-in fitting »click-clock«, G 1/2 o., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.
Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation
Straight push-in fitting »click-clock«, G 3/8 o., for hose exterior Ø 14 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.
Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation
Double threaded nipple, Conical, R 3/8 a., R 1/2 a., AF 22, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Straight push-in bulkhead connector, M16x1, for hose exterior Ø 8 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
Push-in L-fitting »click-clock«, rotating, G 3/8 o., for hose exterior Ø 8 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.
Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation
Straight push-in fitting »click-clock«, G 1/2 o., for hose exterior Ø 14 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.
Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation
Bushing with exterior hexagonal, G 3/8, AF 22, nickel-plated brass, Max. working pressure 25 bar, Max. operating temperature 150°C
Suitable for air, water, oil, steam, etc.
Double threaded nipple, Cylindrical, G 3/8 o. left, G 3/8 o. left, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Push-in L-fitting, rotating, R 1/4 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
Straight Check valve »Blue Series«, Thread to hose, G 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 10 bar
The non-return function of these push-in fittings prevents the air from flowing back, the unidirectional design means air flow is only possible in one direction.
These valves are available with air flow from the port to the tube or from the tube to the port.
L-multi-distributor »Blue Series«, 3-fold, rotating, R 1/8 o., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.
Screw-on hose connector, IT, cyl. G 1/2, for hose I.D. 10 , AF 23 Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-in hose connector, ET, cyl., G 3/8, for hose I.D. 13, AF 19, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Reducing nipple, Long design, ET G 1/4, IT G 1/8, AF 17, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Straight Check valve »Blue Series«, Thread to hose, G 1/8 o., for hose exterior Ø 6 mm, Working pressure max. 10 bar
The non-return function of these push-in fittings prevents the air from flowing back, the unidirectional design means air flow is only possible in one direction.
These valves are available with air flow from the port to the tube or from the tube to the port.
Bulkhead fitting »value line«, M10x1, for hose 6/4 mm, AF 14, Operating pressure max. 18 bar, nickel-plated brass
Bulkhead connectors
Nickel-plated brass, »value line« Series
RSGU pipe clamp, galvanised steel (W1), with rubber profile, D1 shape acc. to DIN 3016, Clamping range 32.0 mm, Belt width 20.0 mm
Acc. to DIN 3016, type D1.
For fastening hoses, pipes, compressed air lines and cables.
Rubber profile protects against vibrations and creeping water.
Screw-in hose connector, G 3/8 o., for hose I.D. 13, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Push-in L-fitting, rotating, G 1/4 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
Double threaded nipple, G 1/2 o., G 1/2 o., AF 25, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-in hose connector, ET, cyl., G 1/4, for hose I.D. 13, AF 19, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-in hose connector »value line«, R 1/2, for hose I.D. 10, Operating pressure max. 60 bar, Operating temperature max. 150 °C
For air, water, steam, oil, etc.
Screw-in hose connector, R 1/2 o., for hose I.D. 12, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-in hose connector, R 1/2 o., for hose I.D. 10, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-in hose connector, R 1/2 o., for hose I.D. 9, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Reducing nipple, G 1/2 o., G 1/4 i., AF 25, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-in hose connector, ET, cyl., G 3/8 left, for hose I.D. 9, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Straight push-in fitting »Blue Series«, Self-locking, G 3/8 o., for hose exterior Ø 8 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.
Straight push-in fitting »metallica«, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 16 bar, nickel-plated brass
Push-in fittings, manufactured entirely in nickel-plated brass.
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).
Straight screw-in fitting »value line«, G 3/8 o., for hose exterior Ø 10 mm, Operating pressure max. 16 bar, nickel-plated brass
Low-priced yet very high-quality series of push-in fittings made of nickel-plated brass.
Compact, space-saving, lightweight design. An O-ring in the fillet at the end of the thread guarantees a tight connection for all male thread parts, even on rough surfaces.
Double threaded nipple, R 3/8 o., R 3/8 o., AF 17, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-on hose connector, IT, cyl. G 1/2, for hose I.D. 6 , AF 23 Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Screw-in hose connector, ET, cyl., G 3/8, for hose I.D. 9, AF 19, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Straight push-in fitting, Exterior hexagonal, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar, Stainless steel
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
Straight Push-in fitting »Blue Series«, Self-locking, R 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.
Bulkhead fitting, M16x1.5 o., G 1/8 i., AF1 22, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.
Reducing nipple, G 1/2 o., G 1/8 i., AF 24, nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Reducing nipple, Long design, ET G 3/8, IT G 3/8, AF 19, Brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.
Push-in T-connector, for hose exterior Ø 6 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.
Straight push-in bulkhead connector, M14x1, for hose exterior Ø 6 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.