Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 10h6 x 2000mm long cutting surface marked with red paint
Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request.
Article ID: 64799310

Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 12h6 x 2000mm long cutting surface marked with red paint
Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request.
Article ID: 64799312

Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 14h6 x 2000mm long cutting surface marked with red paint
Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request.
Article ID: 64799314

Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with yellow paint
Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request.

Article ID: 64799420

Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 8h6 x 2000mm long cutting surface marked with yellow paint
Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request.

Article ID: 64799508

Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 10h6 x 2000mm long cutting surface marked with yellow paint
Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request.

Article ID: 64799510

Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm red brass Rg7
Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm
Article ID: 64836400

Splined shaft similar to DIN 14 profile KW 46x54 x 1000mm long steel C45
Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500,
2000 and 3000 mm. Special lengths up to 6000 mm on request (some in
stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A
straightness of 0.1 mm/m can be produced on request.

Article ID: 64841400

Splined hub with flange DIN 14 KN 46X54 length 100mm steel C45
Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm
Article ID: 64851400

Splined hub with flange DIN 14 KN 42X48 length 80mm red brass Rg7
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64856000

Splined hub with flange DIN 14 KN 46X54 length 100mm red brass Rg7
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64856400

Clamp collar for splined hub DIN 14 KN 46X54 diameter 100mm steel C45
Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05.
Article ID: 64861400

Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm
Article ID: 64899314

Splined hub with flange DIN 14 KN 42X48 length 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899510

Splined hub with flange DIN 14 KN 36X42 length 80mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899512

Splined hub with flange DIN 14 KN 46X54 length 100mm stainless steel 1.4305
Material: Stainless steel, Material-No. 1.4305 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm.
Article ID: 64899514

Carriage for miniature profile rail guide rail width 9mm
Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 3 m/s. Acceleration: Up to 80 m/s2.Accuracy class: P5 (standard, for most applications).Preload class: T0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage.
Article ID: 64901099

Carriage for miniature profile rail guide rail width 12mm
Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 3 m/s. Acceleration: Up to 80 m/s2.Accuracy class: P5 (standard, for most applications).Preload class: T0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage.
Article ID: 64901129

Carriage for miniature profile rail guide rail width 15mm
Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 3 m/s. Acceleration: Up to 80 m/s2.Accuracy class: P5 (standard, for most applications).Preload class: T0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage.
Article ID: 64901159

Locknut UW with integrated threadlocker thread M95x2
Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position!
Article ID: 65349500

Locknut UW with integrated threadlocker thread M100x2
Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position!
Article ID: 65349900

Locknut DIN 981 KM 20 thread M100x2 stainless steel 1.4618
Material: Stainless steel 1.4618 (AISI 201).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965.
Article ID: 65399690

Ball transfer unit 350 with steel-sheet housing ball diameter 22mm completely from stainless steel
Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65435022

Ball transfer unit 368 size 25,4 total height 40mm housing steel with KTL "anti-oxide" electrophoretic coating
Material: Housing: Steel, with KTL "Anti-Oxide" electrophoretic coating.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. * Bore size. Recommended bore tolerance: H9.Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.

Article ID: 65436825

Ball transfer unit 368 size 25,4 total height 44mm housing steel with KTL "anti-oxide" electrophoretic coating
Material: Housing: Steel, with KTL "Anti-Oxide" electrophoretic coating.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. * Bore size. Recommended bore tolerance: H9.Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.

Article ID: 65436826

Ball transfer unit 370 size 38,1 total height 60,3mm housing steel with KTL "anti-oxide" electrophoretic coating
Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65437038

Ball transfer unit 374 size 12.7 housing steel black oxide finished
Material: Housing: Steel, black oxide finish. Inside this sleeve, there is a zinc-plated ball cup. Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load, springloaded. Orientation: Ball up or horizontal. Shock loads may be higher than the stated load range. At force Fs max the end of spring travel is reached. With drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. * Bore size. Recommended bore tolerance: H9. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65437412

Ball transfer unit 377 size 22 stainless steel
Material Type 377: Stainless steel 1.4021. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal. Without drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65437722

Ball transfer unit 378 size 25,4 diameter 50mm housing steel with KTL "anti-oxide" electrophoretic coating
Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65437826

Ball transfer unit 384 size 25,4 total height 44,5mm housing steel with KTL "anti-oxide" electrophoretic coating
Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65438426

Ball transfer unit 388 size 25,4 total height 44,5mm housing steel with KTL "anti-oxide" electrophoretic coating
Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Article ID: 65438826