Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M6 length 30mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65400601
Grub screw DIN 6332 with thrust point thread M6 length 50mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65400700
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M6 length 50mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65400701
Grub screw DIN 6332 with thrust point thread M8 length 40mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65400900
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M8 length 40mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65400901
Grub screw DIN 6332 with thrust point thread M8 length 60mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401100
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M8 length 60mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401101
Grub screw DIN 6332 with thrust point thread M10 length 60mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401300
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M10 length 60mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401301
Grub screw DIN 6332 with thrust point thread M10 length 80mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401500
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M10 length 80mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401501
Grub screw DIN 6332 with thrust point thread M12 length 60mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401700
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M12 length 60mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401701
Grub screw DIN 6332 with thrust point thread M12 length 80mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401900
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M12 length 80mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65401901
Grub screw DIN 6332 with thrust point thread M12 length 100mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402000
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M12 length 100mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402001
Grub screw DIN 6332 with thrust point thread M16 length 80mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402400
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M16 length 80mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402401
Grub screw DIN 6332 with thrust point thread M16 length 100mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402500
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M16 length 100mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402501
Grub screw DIN 6332 with thrust point thread M16 length 125mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402600
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M16 length 125mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65402601
Grub screw DIN 6332 with thrust point thread M20 length 100mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65403000
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M20 length 100mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65403001
Grub screw DIN 6332 with thrust point thread M20 length 125mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65403100
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M20 length 125mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65403101
Grub screw DIN 6332 with thrust point thread M20 length 150mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65403200
Grub screw DIN 6332 with thrust point type SK with internal hexagon thread M20 length 150mm steel strength 5.8 black oxide finished
Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type SK: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000).
Article ID: 65403201
Thrust pad DIN 6311 diameter 16mm with snap ring DIN 9045
Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page.
Article ID: 65410800
Thrust pad DIN 6311 diameter 20mm with snap ring DIN 9045
Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page.
Article ID: 65411000
Thrust pad DIN 6311 diameter 25mm with snap ring DIN 9045
Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page.
Article ID: 65411200
Thrust pad DIN 6311 diameter 32mm with snap ring DIN 9045
Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page.
Article ID: 65411600
Thrust pad DIN 6311 diameter 40mm with snap ring DIN 9045
Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page.
Article ID: 65412000
Thrust pad factory standard diameter 48mm
Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page.
Article ID: 65412400
Thrust pad factory standard diameter 60mm
Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page.
Article ID: 65413000
Leveling pad 2259 type A thread M6 pad made from steel, quenched and tempered
Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65520600
Leveling pad 2259 type AG thread M6 bolt length 60mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65520601
Leveling pad 2259 type A thread M8 pad made from steel, quenched and tempered
Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65520800
Leveling pad 2259 type AG thread M8 bolt length 80mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65520801
Leveling pad 2259 type A thread M10 pad made from steel, quenched and tempered
Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521000
Leveling pad 2259 type AG thread M10 bolt length 100mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521001
Leveling pad 2259 type AG thread M10 bolt length 150mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521002
Leveling pad 2259 type A thread M12 pad made from steel, quenched and tempered
Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521200
Leveling pad 2259 type AG thread M12 bolt length 100mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521201
Leveling pad 2259 type AG thread M12 bolt length 150mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521202
Leveling pad 2259 type A thread M16 pad made from steel, quenched and tempered
Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521600
Leveling pad 2259 type AG thread M16 bolt length 100mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521601
Leveling pad 2259 type AG thread M16 bolt length 200mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65521602
Leveling pad 2259 type A thread M20 pad made from steel, quenched and tempered
Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65522000
Leveling pad 2259 type AG thread M20 bolt length 100mm steel black oxide finished
Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish.
Article ID: 65522001