Round flange trapezoidal nut Tr.52 x 8 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H.
Article ID: 64445200
Round flange trapezoidal nut Tr.50 x 8 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H.
Article ID: 64445000
Round flange trapezoidal nut Tr.48 x 8 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H.
Article ID: 64444800
Round flange trapezoidal nut Tr.44 x 7 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H.
Article ID: 64444400
Round flange trapezoidal nut Tr.40 x 7 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H.
Article ID: 64444000
Ready-to-install flange nut Tr.60 x 9 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H.
Article ID: 64477460
Ready-to-install flange nut Tr.50 x 8 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H.
Article ID: 64477450
Ready-to-install flange nut Tr.40 x 7 single-start left material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H.
Article ID: 64477440
Ready-to-install flange nut Tr.60 x 9 single-start right material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477160
Ready-to-install flange nut Tr.50 x 8 single-start right material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477150
Hexagonal trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 15mm wrench size 17mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 15mm outer diameter 22mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 20mm outer diameter 22mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.14 x 4 single-start right length 21mm wrench size 22mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.12 x 3 single-start right length 18mm wrench size 19mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.12 x 3 single-start right length 18mm outer diameter 26mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.14 x 4 single-start right length 21mm outer diameter 30mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.16 x 4 single-start right length 24mm wrench size 27mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.12 x 3 single-start right length 24mm outer diameter 26mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.12 x 3 single-start left length 18mm outer diameter 26mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.16 x 4 single-start right length 24mm outer diameter 36mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.20 x 4 single-start right length 30mm wrench size 30mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.18 x 4 single-start right length 27mm wrench size 27mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.10 x 3 single-start left length 15mm outer diameter 22mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.18 x 4 single-start right length 27mm outer diameter 40mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.20 x 4 single-start left length 30mm wrench size 30mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.20 x 4 single-start right length 30mm outer diameter 45mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.16 x 4 single-start left length 24mm wrench size 27mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.16 x 4 single-start right length 32mm outer diameter 36mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.24 x 5 single-start right length 36mm wrench size 36mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.14 x 4 single-start right length 28mm outer diameter 30mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.16 x 4 single-start left length 32mm outer diameter 36mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.18 x 4 single-start right length 36mm outer diameter 40mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.10 x 3 single-start left length 15mm wrench size 17mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.20 x 4 single-start right length 40mm outer diameter 45mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut C35Pb Tr.20 x 4 single-start left length 30mm outer diameter 45mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.24 x 5 single-start right length 36mm outer diameter 50mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 1,5 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut steel C35Pb Tr.10 x 3 single-start left length 20mm outer diameter 22mm
Material: Steel C35Pb.
Tolerance zone 7H.
Height = 2 x diameter.
Attention:
Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel.
This nuts are only for clamping, manual adjustments or as fastening nut.
Not suitable for drive systems.
Round trapezoidal nut stainless 1.4305 Tr.12 x 3 single-start right length 18mm outer diameter 26mm
Material: 1.4305.
Tolerance zone 7H. Height = 1,5 x diameter.
Attention: Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel. This nuts are only for clamping,
manual adjustments or as fastening nut. Not suitable for drive systems.
Hexagonal trapezoidal nut stainless 1.4305 Tr.12 x 3 single-start right length 18mm wrench size 19mm
Material: 1.4305. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.
Article ID: 64399112
Hexagonal trapezoidal nut steel C35Pb Tr.18 x 4 single-start left length 27mm wrench size 27mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.
Hexagonal trapezoidal nut steel C35Pb Tr.24 x 5 single-start left length 36mm wrench size 36mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.