V9BP-01 amplifier with auto-teach for miniature opto sensors
The universal switching amplifier has a selectable pulse stretching (50 ms) and light / dark switching. The sensitivity is adjustable via teach-in or manually via buttons.

Operating voltage: 10-30 V DC
Switching output: PNP
Switching frequency: 500 Hz
Terminal (supply): M8, 4-pin

FINEspot® compact light scanner
Cuboid, rugged metal housing and M8 connector. The Fine spot optic with a partial light output ensures particularly precise object detection. The sensitivity can be adjusted via a potentiometer.
Type: 7 x 8 x 59 mm
Operating distance: 50 mm
Operating voltage: 10-30 V DC
Connection: M8 connector, 3-pole
Output: PNP

FINEspot® mini photocell M3
The new Fine spot optics allows an opening angle of only 3.5 ° and guarantees the highest resolution without additional lenses or apertures. Extra flexible cable from copper - no installation limitation by minimum bending radius!

Design: M3 x 8 mm
Range: 500 mm
Resolution :: 0.04 mm (see detail)

Please note that you need a separate amplifier to operate.

Mean Well DIN Rail power supply DRP-480-24
Input voltage: 180 ... 264 VAC; 250 ... 370 VDC
Output voltage: 24 V DC
Output current: 20 A
Power: 480 W
Mounting: DIN-RAIL
Dimensions W x H x D: 227 x 125.2 x 100 mm
Connection: screw

FINEspot® mini photocell EW-56-0-M
The tiny metal case with one-point mounting allows a space-saving installation. The Fine spot optic produces a beam angle of only 3.5 ° and guarantees the highest resolution without additional lenses or apertures.

Type: 3 x 5 x 5.5 mm
Range: 500 mm
Resolution :: 0.04 mm (see detail)

Please note that you need a separate amplifier to operate.

FINEspot® mini light sensor RTV-169-0-M
Diffuse with effective background suppression. The small light spot diameter in focus guarantees a safe resolution of even the smallest objects without background interference influence.

Type: 4 x 8.5 x 16 mm
Operating distance: 3-15 mm (nominal operating distance: 7.5 mm)

Please note that you need a separate amplifier to operate.

FINEspot® mini photocell EW-1313-0-M
The 3 mm flat sensor in a rugged aluminum housing has a glass protected Fine spot optics. The particularly small opening angle provides a high resolution and a good repeatability. No mutual interference, even in series assembly!

Type: 3 x 13 x 13.5 mm
Range: 500 mm
Resolution :: 0.04 mm (see detail)

Please note that you need a separate amplifier to operate.

S62-PA-5-M31-PP infrared diffuse reflection sensors with background suppression
Type: 18 x 50 x 50 mm
Operating voltage: 10-30 V DC
Light: infrared, 880 nm
Scanning range: 200-2000 mm
Setting: 6-turn trimmer
Background suppression
Output: PNP
Connection: M12 connector, 4-pin

Rotating brackets for SG BODY COMPACT (4 pcs kit)
Should adjustment of the angular position of the light curtain prove necessary, the use of the rotating fixing brackets ST K4ROTBC is recommended that the permit thanks to the cylindrical surfaces of the caps rotation of the product by 360 ° around its own axis.

Digital Pressure Gauge | Pressure: -1 to +1 bar
Connection: plug connector (male 2m)
Pressure connection: M5 female thread
Gases measured: non-corrosive gases
Output: Analog 1 ... 5 V / 1 PNP
Intuitive setup and easy readability
Clear 3-color measurement value display
Note: An electrical connection cable of length 2m (CN-14A-C2) is attached to the product.

S62-PA-5-M21-PP infrared diffuse reflection sensors with background suppression
Type: 18 x 50 x 50 mm
Operating voltage: 10-30 V DC
Light: infrared, 880 nm
Scanning range: 60 to 1200 mm
Setting: 6-turn trimmer
Background suppression
Output: PNP
Connection: M12 connector, 4-pin

Digital Pressure Gauge | Pressure: -1 to +10 bar
Connection: plug connector (male 2m)
Pressure connection: M5 female thread
Gases measured: non-corrosive gases
Output: Analog 0.6 ... 5 V / 1 PNP
Intuitive setup and easy readability
Clear 3-color measurement value display
Note: An electrical connection cable of length 2m (CN-14A-C2) is attached to the product.

Screw-glass to protect LED ring lights of the RL12 series
With protection glass LED ring lights can be protected the RL12 series from dust and dirt.

Diffuser for LED ring lights of the RL12 series to produce diffused light
With the lens diffused light can be generated. It fits on all LED ring lights of the RL12 series.

S8-PH-5-B51-PP laser reflection light barrier with M8 connector
Type: 11 x 42 x 25 mm
Operating voltage: 12-30 V DC
Light: laser, red 645 ... 665 nm
Spot size: <0.5 mm at 500 mm
Switching frequency: 10 kHz
Range: 0-10 m on reflector R2
Setting: Trimmer
Output: PNP
Connection: M8 connector, 4-pin

Retroreflex S45-PR-5-T53-PH for transparent objects
Type: 34 x 20 x 12 mm
Operating voltage: 10-30 V DC
Light: red light, 632 nm, polarized
Range: 0.5-2 m reflector R4
Setting: teach-in, remote input
Switching frequency: 1000 Hz
Output: PNP
Connection: M8 connector, 4-pin

1-armed flexible fiber optic light guide in various lengths and thicknesses.
The one-armed flexible light guide can be used in all cases must be brought where light on hard to reach areas. Since only high performance glass fibers are processed in the production of the light guide and the entire production process to strict quality control subject, he transported almost loss-free light where it is needed. For various applications, there is the optical fiber in two different lengths. The fiber optic light guide fits both to all cold light sources of Starlight than others and to the device manufacturer. With accessories of the light guide can be optimally positioned.

TDR 480-24 Meanwell 24V DC Three-phase 20A power supply
Three-phase 24V DC power supply with 480 watts of power for DIN rail mounting in a compact metal housing. The Mean Well TDR 480-24 with active PFC is protected against short circuit, overload, overvoltage and overtemperature. The power supply plugs directly into three-phase networks with 340 to 550V AC connect. On the input side, the device can also be operated with only two phases. Thanks to the high efficiency of 92.5% simple convection cooling is sufficient even at full load.

Input voltage: 3-phase 340 ... 550 V AC
Output voltage: 24 V DC
Output current: 20 A
Power output: 480 W
Efficiency: 92.5%
Dimensions W x H x D: 85.5 x 125.2 x 128.5 mm
Connection: Screw

Other models of the Meanwell TDR series:
960 W: TDR 960-24

Deflecting mirror for single and multi-beam light barriers
The deflection mirror SG-DM 150 are used in conjunction with single and multi-beam safety light barriers for low-cost multi-hazardous point protection. Thanks to its structure, the SG-DM 150 deflecting mirror can directly on the machine or in protective pillars of SG-PSB series are mounted.

Safety Relay category 4 for SAFEasy light curtains
Relay outputs: 3 and 1 NC forcibly guided,
Automatic or manual start with monitoring selectable

Digital pressure gauge with mech. Compatibility with the DP2 series
Pressure: -1 to +10 bar

Connection: plug connector (male 2m)
Pressure connection: G 1/8 female thread
Gases measured: non-corrosive gases
Output: 2 x PNP
Intuitive setup and easy readability
Clear 3-color measurement value display

Note: An electrical connection cable of length 2m (CN-14A-C2) is attached to the product.

Digital pressure gauge with mech. Compatibility with the DP2 series
Pressure: -1 to +1 bar

Connection: plug connector (male 2m)
Pressure connection: G 1/8 female thread
Gases measured: non-corrosive gases
Output: 2 x PNP
Intuitive setup and easy readability
Clear 3-color measurement value display

Note: An electrical connection cable of length 2m (CN-14A-C2) is attached to the product.

LED machine light COMPACT ALPHA 6W in a robust design for demanding applications.
The COMPACT ALPHA series is perfect for permanent lighting of machines indoors with limited space. The robust housing made of anodized aluminum and a cover made of tempered glass (IK06) guarantees the best resistance to liquids. The lamp can be connected directly without other components via an M12 plug to 24V DC.
Product Highlights

Energy-saving, efficient and therefore environmentally friendly LED lighting technology
Robust design for demanding applications IP 67
Models available with angle 30 °, 90 °, 110 °
Homogeneous and flicker-free illumination
Resistant to many coolants and lubricants
24V DC direct connection, integrated Anschaltgerät
Latest LED technology with up to 50,000 hours
Compact design ø 40 x 204 mm
Connection via M12 connector


Please indicate when ordering:

Optics: Version with 30 °, 90 ° or 110 ° beam angle
Cascadable: By Wired version with M12 connector on each side for the series connection

► Note: versions with dimmers are available upon request.
► Caution: The angle brackets CO.ALPHA.FX01 must be ordered separately.

1-armed semi-rigid fiber optic light guide in different lengths.
The 1-arm semi-rigid gooseneck light guide allows the free and flexible positioning of the light guide directly on the object. Applies the light guide primarily in lighting small and very small parts and heat-sensitive objects. Since only high performance glass fibers are processed in the production of the light guide and the entire production process to strict quality control subject, he transported almost loss-free light where it is needed. For various applications, there is the optical fiber in two different lengths. The semi-rigid light pipe fits both to all cold light sources of Starlight than others and to the device manufacturer.

Digital Pressure Gauge | Pressure: -1 to +10 bar
Connection: M8 connector
Pressure connection: M5 internal thread and external thread G 1/8
Gases measured: non-corrosive gases
Output: Analog 0.6 ... 5 V / 1 PNP
Intuitive setup and easy readability
Clear 3-color measurement value display

Digital Pressure Gauge | Pressure: -1 to +1 bar
Connection: M8 connector
Pressure connection: M5 internal thread and external thread G 1/8
Gases measured: non-corrosive gases
Output: Analog 1 ... 5 V / 1 PNP
Intuitive setup and easy readability
Clear 3-color measurement value display

LED machine light 24V DC with M12 connector.

Fexibly usable lamps (exclusive): LED module Ø 21 mm; optionally in various white and color variations and different optics.

LED machine light IL100-24V is a versatile and robust LED lamp for industrial use with changing and demanding job specifications. Typical use of the machine light in the printing industry, packaging industry, tool industry, automation equipment, in the industrial image processing (Machine Vision), metal processing, metrology and woodworking.
Modern LED technology provides high efficiency, long life and energy-saving and environmentally friendly. The innovative modular LED design allows quick replacement of the LED module on the machine light. The user can choose between different colors of light and optics and thus adjust the light of the lamp perfectly to its application.
With elaborate accessories for securing and positioning the machine light can where the light is required to be attached there. prevent the rugged anodized aluminum housing and a robust protective glass that the lamp is damaged by mechanical or chemical influences and protect them from water and dust. Thus, the machine light is suitable for use in extreme conditions.
Product Highlights

Energy-saving, efficient and therefore environmentally friendly LED lighting technology in a robust aluminum housing
Suitable for extreme conditions (IP67)
The innovative "module LED" system allows a free choice of light sources in various white and color variants as well as lenses with different radiation (Spot, Flood, Diffuse and line)
Simple and easy replacement of the LED module
Insensitive to vibrations
No heat in the light direction
No danger of burning dust, coolants and lubricants
Homogeneous and flicker-free illumination
Wide range of accessories for a variety of mounting options, for example, Ball joint mounting bracket, magnetic holder, table clamp etc.

► Delivery: LED machine light IL100-24V
► Attention: LED module must be ordered separately.

Mini-light barrier housing V2A
Particularly compact through-beam photoelectric of parallel pipes for the food industry. Highly flexible connecting cables from copper simplify installation even in restricted space.

Type: 6 x 6 x 12 mm
Reach: 1000 mm
Resolution: 0.3 mm

Please note that you need a separate amplifier to operate.

Digital pressure gauge with mech. Compatibility with the DP2 series
Pressure: -1 to +1 bar

Connection: plug connector (male 2m)
Pressure connection: G 1/8 female thread
Gases measured: non-corrosive gases
Output: Analog 1 ... 5 V / 1 PNP
Intuitive setup and easy readability
Clear 3-color measurement value display

Note: An electrical connection cable of length 2m (CN-14A-C2) is attached to the product.

Digital pressure gauge with mech. Compatibility with the DP2 series
Pressure: -1 to +10 bar

Connection: plug connector (male 2m)
Pressure connection: G 1/8 female thread
Gases measured: non-corrosive gases
Output: Analog 0.6 ... 5 V / 1 PNP
Intuitive setup and easy readability
Clear 3-color measurement value display

Note: An electrical connection cable of length 2m (CN-14A-C2) is attached to the product.

Fiber amplifier S70-5-E1-P for diverse requirements for use with fiber diameter 2.2 mm made of glass or plastic.

Double display for the display of signal level and threshold
Rocker push buttons for easy and quick adjustment
Visible red light, light output LED
High-speed mode with 200 microseconds response time

The S70 Fiber amplifier provides reliable detection of small parts even in low contrast circumferences. The digital display shows the same signal strength and switching threshold and so united in conjunction with the adjustment buttons for easy operation. This range has been specially developed for the requirements in the packaging, electronics and pharmaceutical industries.

Luminescence S50-PA-5-U03-PP
Operating voltage: 10-30 V DC
Operating distance: 8-20 mm
Setting: teach-in button
Light: UV-LED, 370 nm
Light spot: 3 mm
Switching frequency: 1 kHz
Output: PNP
Connection: M12 connector, 4-pin

Digital contrast sensor TL50-W-815
Operating voltage: 10-30 V DC
Operating distance: 9 mm
Setting: SET key
Light emission: Long and short side, reversible
Light spot position: vertical
Light spot dimensions: 1.5 x 5 mm
Switching frequency: 15 kHz
Output: PNP / NPN
Connection: M12 connector, 4-pin

OV-1001-HUP Dynamic switching amplifier for detection of fast events on a variable background signal
Application examples:

Defects on fast-running threads or wires
Counting of falling objects in light band sensors
Flow control of granules in transparent tubes

Operating voltage: 10-30 V DC
Switching output: PNP
Switching frequency: 2000 Hz
Terminal (supply): M8, 4-pin

S8-PH-5-M01-PP laser reflection sensor with background suppression
Type: 11 x 42 x 25 mm
Operating voltage: 12-30 V DC
Light: laser, red 645 ... 665 nm
Background suppression
Switching frequency: 5 kHz
Scanning range: 20-200 mm
Setting: Trimmer
Output: PNP
Connection: M8 connector, 4-pin

UV LED module Ø 21 mm with ultraviolet light in two different wavelengths.
The innovative concept of "modular" LED allows quick replacement of LED modules in a variety of LED lights of Starlight. There are two variants of the ultraviolet LED module with different wavelengths in the UV range. So the appropriate lighting can be selected for each application. The LED modules with 21mm optic diameter are suitable for use in the LED table lamp TL1 the LED Auflichtleuchten IL-1, IL-12, IL-13 and the LED Machine Lights IL100 and IL1300.
► When using a UV module, we recommend the wearing of protective eyewear!

UV LED module Ø 21 mm with ultraviolet light in two different wavelengths.
The innovative concept of "modular" LED allows quick replacement of LED modules in a variety of LED lights of Starlight. There are two variants of the ultraviolet LED module with different wavelengths in the UV range. So the appropriate lighting can be selected for each application. The LED modules with 21mm optic diameter are suitable for use in the LED table lamp TL1 the LED Auflichtleuchten IL-1, IL-12, IL-13 and the LED Machine Lights IL100 and IL1300.
► When using a UV module, we recommend the wearing of protective eyewear!

S62-PL-5-M01-PP laser reflection sensor with background suppression
Type: 18 x 50 x 50 mm
Operating voltage: 10-30 V DC
Light Source: Laser red, 645 ... 665 nm
Scanning range: 30-150 mm
Adjustment: 4-turn trimmer
Background suppression
Output: PNP
Connection: M12 connector, 4-pin

LED machine light T-CITY 6W in a robust design for demanding applications.
The Series T-CITY is perfect for permanent lighting of machine indoors under extreme conditions. The encapsulated aluminum body with a jacket made of borosilicate glass guarantees the best resistance to liquids. Equipped with multi-chip LED This LED tube light ensures optimum light quality and long life.
Product Highlights

Energy-saving, efficient and therefore environmentally friendly LED lighting technology
Robust design for demanding applications IP 68
LED multi-chip with 120 ° beam
Homogeneous and flicker-free illumination
Resistant to many coolants and lubricants
24V DC direct connection, integrated Anschaltgerät
Latest LED technology with up to 50,000 hours
Compact design ø 38 x 202 mm
Models with cable connectors or M12


► Caution: The angle brackets T.FX01 must be ordered separately.

Fiber optics for FMS 5.0

S8-PH-5-M53-PP laser reflection sensor for detecting shiny and transparent objects.
New patented technology without reflector
This Clear Detection Sensor was developed for the detection of shiny and transparent objects by background suppression. This patented technology enables the suppression of reflective backgrounds and simultaneously identifies objects with similar reflective properties.
The laser version is suitable for the detection with high precision, even of small objects at fixed and reflective backgrounds. The transparent object may move or flutter between the background and the sensor is desired without the switching threshold must be changed.
Type: 11 x 42 x 25 mm
Operating voltage: 12-30 V DC
Light: laser, red 645 ... 665 nm
Scanning range: 50-150 mm with background suppression
Setting: Trimmer
Output: PNP
Connection: M8 connector, 4-pin

Deflecting mirror for safety light curtains to H = 450 mm
 The deflection mirror SG-DM 600 are used in conjunction with SAFEasy light curtains for cost-effective multi-hazardous point protection. Thanks to its structure, the SG-DM 600 deflecting mirror can directly on the machine or in protective pillars of SG-PSB series are mounted.

M120A-BM10CA-PS6K / 150 ° C / TA200 / 1200
Magnetic high temperature sensor with 1200 mm silicone cable and M12 connector.
Due to its special construction with separate from the sensor amplifier, the magnetic sensor for applications in the high temperature range is up to 150 ° C.

Version with 200 ms Impusverlängerung
Operating distance: 120 mm magnet M 4.0
Operating voltage: 10-30 V DC
Switching frequency: ≤ 4 Hz for 200 ms ta
Output: PNP,
Connection: 1200 mm silicon cable with M12 connector

OV-1001-DU analog amplifier (4 ... 20 mA) for miniature opto sensors
The setting of the operating modes and parameter values ​​is effected via a sliding switch with four positions and a jog switch with push-button function. The signal strength is displayed on a digital display.

Operating voltage: 15-30 V DC
Current output 4 - 20 mA
Limit frequency: 1 kHz
Terminal (supply): M8, 4-pin

OV-1001-CU analog amplifier (0 ... 10V) for miniature opto sensors
The setting of the operating modes and parameter values ​​is effected via a sliding switch with four positions and a jog switch with push-button function. The signal strength is displayed on a digital display.

Operating voltage: 15-30 V DC
Voltage output: 0 ... 10V
Limit frequency: 1 kHz
Terminal (supply): M8, 4-pin

magnetic field detector
The magnetic detector MD 90 serves for the contactless detection of a magnetic field. The switching characteristics were matched to those magnetic sensors of the M90 ​​series. Operating distance of 90 mm on permanent magnet M4.0.

Fiber amplifier with IO-Link interface S70-5-E1-PZ, for use with fiber diameter 2.2 mm made of glass or plastic.

Double display for the display of signal level and threshold
Rocker push buttons for easy and quick adjustment
Visible red light, light output LED
High-speed mode with 200 microseconds response time

The S70 Fiber amplifier provides reliable detection of small parts even in low contrast circumferences. The digital display shows the same signal strength and switching threshold and so united in conjunction with the adjustment buttons for easy operation. This range has been specially developed for the requirements in the packaging, electronics and pharmaceutical industries.

LED machine light COMPACT ALPHA 12W heavy duty for demanding applications.
The COMPACT ALPHA series is perfect for permanent lighting of machines indoors with limited space. The robust housing made of anodized aluminum and a cover made of tempered glass (IK06) guarantees the best resistance to liquids. The lamp can be connected directly without other components via an M12 plug to 24V DC.
Product Highlights

Energy-saving, efficient and therefore environmentally friendly LED lighting technology
Robust design for demanding applications IP 67
Models available with angle 30 °, 90 °, 110 °
Homogeneous and flicker-free illumination
Resistant to many coolants and lubricants
24V DC direct connection, integrated Anschaltgerät
Latest LED technology with up to 50,000 hours
Compact design ø 40 x 354 mm
Connection via M12 connector


Please indicate when ordering:

Optics: Version with 30 °, 90 ° or 110 ° beam angle
Cascadable: By Wired version with M12 connector on each side for the series connection

► Note: versions with dimmers are available upon request.
► Caution: The angle brackets CO.ALPHA.FX01 must be ordered separately.

OV-1001-GUP amplifier AUTO-SYNC for miniature opto sensors
Universal amplifier with automatic synchronization of the pulse frequency. No interference with "side by side" - mounting. The sensitivity is adjustable via teach-in or manually via buttons. A pulse stretching is up to 250 ms can be selected from the 0th The signal strength is displayed on a digital display.

Operating voltage: 10-30 V DC
Switching output: PNP
Switching frequency: 500 Hz
Terminal (supply): M8, 4-pin

Contrast sensor TL46-W-815L
Operating voltage: 10-30 V DC
Operating distance: 9 mm
Setting: SET key
Light emission: Long and short side, reversible
Light spot orientation: horizontal
Light spot dimensions: 1.5 x 5 mm
Switching frequency: 15 kHz
Output: PNP / NPN / Analog
Connection: M12 connector, 5-pin

Contrast sensor TL46-W-815
Operating voltage: 10-30 V DC
Operating distance: 9 mm
Setting: SET key
Light emission: Long and short side, reversible
Light spot position: vertical
Light spot dimensions: 1.5 x 5 mm
Switching frequency: 15 kHz
Output: PNP / NPN / Analog
Connection: M12 connector, 5-pin

Fiber amplifier High speed model S70-5-E2-P for use with fiber diameter 2.2 mm made of glass or plastic.

Double display for the display of signal level and threshold
Rocker push buttons for easy and quick adjustment
Visible red light, light output LED
High-speed mode with 10 microseconds response time

The S70 Fiber amplifier for high speed applications provides reliable detection of small parts even in low contrast circumferences. The digital display shows the same signal strength and switching threshold and so united in conjunction with the adjustment buttons for easy operation. This range has been specially developed for the requirements in the packaging, electronics and pharmaceutical industries.

S62-PL-5-M11-PP laser reflection sensor with background suppression
Type: 18 x 50 x 50 mm
Operating voltage: 10-30 V DC
Light Source: Laser red, 645 ... 665 nm
Scanning range: 50-350 mm
Setting: 6-turn trimmer
Background suppression
Output: PNP
Connection: M12 connector, 4-pin

Deflecting mirror for safety light curtains to H = 750 mm
 The deflection mirror SG-DM 900 are used in conjunction with SAFEasy light curtains for cost-effective multi-hazardous point protection. Thanks to its structure, the SG-DM 900 deflecting mirror can directly on the machine or in protective pillars of SG-PSB series are mounted.

LED machine light 24V DC TRACK ALPHA 13 Watt heavy duty for machinery and equipment with increased lighting requirements.
The TRACK ALPHA series is perfect for permanent lighting of machines and plants with an increased need for light. The robust housing having a diameter of 70 mm is made of anodized aluminum. The 5 mm thick protective glass provided by the matte surface of a diffuse, non-glare light output. The lights are shockproof and resistant to vibration and can be used in environments with coolants and lubricants. the lamps can directly to a 24V DC power supply are connected via an M12 connector.
Product Highlights

Energy-saving, efficient and therefore environmentally friendly LED lighting technology
Robust design for demanding applications IP 67
Angle 120 °
Homogeneous and flicker-free illumination
Resistant to many coolants and lubricants
24V DC direct connection, integrated Anschaltgerät
Latest LED technology with up to 50,000 hours
Design ø 70 x 321 mm
Connection via M12 connector


► Note: cascadable and dimmable versions are available on request.
► Caution: The lamp holder must be ordered separately - see accessories.

Deflecting mirror for safety light curtains to H = 1050 mm
 The deflection mirror SG-DM 1200 are used in conjunction with SAFEasy light curtains for cost-effective multi-hazardous point protection. Thanks to its structure, the SG-DM 1200 reflecting mirror can directly on the machine or in protective pillars of SG-PSB series are mounted.

SG2-30-015-OO-X Safety light curtain type 2 with 30 mm resolution (finger protection) and a protective height of 150 mm.
Type 2 (IEC 61496)
Performance Level PL c (EN ISO 13849)
Safety Integrity Level: SIL 1 (IEC 61508), CL SIL 1 (ICE 62061)

Basic series with standardized M12, 5-pin connection technology
Controlled height: 150 mm
Range: 0.2 ... 19 m
Resolution: 30 mm (finger protection)
Safety outputs: 2 OSSD semiconductor PNP

magnetic field detector
The magnetic detector MD 120 serves for the contactless detection of a magnetic field. The switching characteristics were matched to those magnetic sensors of the M120 series. Operating distance 120 mm permanent magnet M4.0.

Evaluation device for single-beam photoelectric safety switches
The safety evaluation type 4 provides a quick and easy installation, wiring and configuration. Up to 4 safety light barrier pairs of series S5-ST, ST-SL5 and connected S300.

Guard column 1900 mm for light curtains / deflection mirror
The rugged column protects light curtains or deflecting mirrors against damage. The two bottom fixing plates provide an easy and quick adjustment. A rear groove serves for fastening external muting sensors. The optional spring element SG-P ensures a provision to shocks.
Fits: SG + SE light curtains mm to 1800 SchutzfeldhöheUmlenkspiegel SG-DM 1800