Holding force : 180 N
GM14850
SKU: GM14850
Stock: 0
Size: Ø72 mm
Material: Stainless steel polished
A coat hook is essential. Magnetic coat hooks attach to any steel surface such as an office cabinet, warehouse rack, door or steel separation wall. Without drilling and screwing, you can quickly create a hook for a bag, coat and tie.

Attach without drilling or screwing
Moveable, reusable and non-scratch
With anti-slip coating

Application

Wherever steel is present

Hanging objects with magnets is incredibly fast. Moreover, you don't need a technician. You can create a wardrobe on any steel surface in no time at all. For example, on a steel office cabinet you can simply click the magnetic coat hook in place. Moving or removing is also done in a jiffy. No need to drill holes or use screws.
 
If drilling or screwing in steel divider walls is not allowed or not possible, magnets are an excellent solution.
 
For example, our coat hooks have been applied to steel beams, warehouse racks, doors, office cabinets, drawer blocks and dividers. But a magnetic hook also works great on a flat design radiator. That way, your wet clothes dry a lot faster.

Additional information

Magnetic force and shear force

A magnetic coat hook consists of a magnet system and a coat hook. The magnet system is made of ferrite or neodymium. Enough magnetic force to hang a jacket.
The force required to slide the hook over the surface is called shear force.
It is important in addition to magnetic force. That’s why our magnetic coat hooks are equipped with a special coating. This anti-slip coating on the back of the coat hook will ensure that the hook stays in place and does not slide down.
 
Our magnetic coat hooks have a high magnetic force and a high shear force. They have a load capacity of up to 18 kg.

Advantages

Magnets or Velcro and self-adhesives?

Magnets retain their holding power, unlike Velcro and self-adhesives. Furthermore, they leave no holes or other wall damage behind when moved or removed. If drilling or screwing in steel divider walls is not allowed or not possible, magnets are an excellent solution. With our magnetic coat hooks, you can easily hang your coat on any steel surface.

Holding force : 180 N
GM14851
SKU: GM14851
Stock: 0
Size: Ø72 mm
Material: Stainless steel frosted
A coat hook is essential. Magnetic coat hooks attach to any steel surface such as an office cabinet, warehouse rack, door or steel separation wall. Without drilling and screwing, you can quickly create a hook for a bag, coat and tie.

Attach without drilling or screwing
Moveable, reusable and non-scratch
With anti-slip coating

Application

Wherever steel is present

Hanging objects with magnets is incredibly fast. Moreover, you don't need a technician. You can create a wardrobe on any steel surface in no time at all. For example, on a steel office cabinet you can simply click the magnetic coat hook in place. Moving or removing is also done in a jiffy. No need to drill holes or use screws.
 
If drilling or screwing in steel divider walls is not allowed or not possible, magnets are an excellent solution.
 
For example, our coat hooks have been applied to steel beams, warehouse racks, doors, office cabinets, drawer blocks and dividers. But a magnetic hook also works great on a flat design radiator. That way, your wet clothes dry a lot faster.

Additional information

Magnetic force and shear force

A magnetic coat hook consists of a magnet system and a coat hook. The magnet system is made of ferrite or neodymium. Enough magnetic force to hang a jacket.
The force required to slide the hook over the surface is called shear force.
It is important in addition to magnetic force. That’s why our magnetic coat hooks are equipped with a special coating. This anti-slip coating on the back of the coat hook will ensure that the hook stays in place and does not slide down.
 
Our magnetic coat hooks have a high magnetic force and a high shear force. They have a load capacity of up to 18 kg.

Advantages

Magnets or Velcro and self-adhesives?

Magnets retain their holding power, unlike Velcro and self-adhesives. Furthermore, they leave no holes or other wall damage behind when moved or removed. If drilling or screwing in steel divider walls is not allowed or not possible, magnets are an excellent solution. With our magnetic coat hooks, you can easily hang your coat on any steel surface.

40 mm Ferrite
GM16407
SKU: GM16407
Stock: 0
Holding force: 125 N
Height: 8 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

80 mm Ferrite
GM16410
SKU: GM16410
Stock: 0
Holding force: 600 N
Height: 18 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

Ferrite 600 N
GM16608
SKU: GM16608
Stock: 0
Diameter (D): 83 mm
Height: 18 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

Neodymium (NdFeB) 100 N
GM17461
SKU: GM17461
Stock: 0
Size: 43 x 31 mm
Attachment: M4
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 290 N
GM17471
SKU: GM17471
Stock: 0
Size: 70 x 50 mm
Attachment: M5
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 13 N
GM17499
SKU: GM17499
Stock: 0
Size: Ø12 mm
Height (L): 14.8 mm
Shear force: 5 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 100 N
GM17515
SKU: GM17515
Stock: 0
Size: Ø43 mm
Height (L): 12 mm
Shear force: 30 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 250 N
GM1751901
SKU: GM1751901
Stock: 0
Size: Ø66 mm
Height (L): 23.5 mm
Shear force: 75 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Neodymium (NdFeB) 550 N
GM17530
SKU: GM17530
Stock: 0
Size: Ø88 mm
Height (L): 23.5 mm
Shear force: 125 N
Compact magnet systems with a steel shell and rubber coating for more shear force. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field. Rubberized pot magnets are perfectly suited for easily damaged surfaces, to prevent scratches. Due to the powerful neodymium system, you can rest assured they will remain securely in place.

Attach without drilling or screwing
Moveable, reusable and non-scratch
Deliverable from stock
High shear force

Composition and construction of pot magnets rubber coated

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell or pot ensures magnetic shielding. The bonding surface has a rubber coating for a higher shear force and to prevent scratches.

Operating temperature

When does loss of magnetic strength occur?

Neodymium rubber coated pot magnets have an operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic strength. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Holding forces

The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without air gap.

Round Ø10 mm
GM1800501
SKU: GM1800501
Stock: 0
Holding force: 0,7 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Round Ø20 mm
GM1800801
SKU: GM1800801
Stock: 0
Holding force: 1.5 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Round Ø25 mm
GM1800901
SKU: GM1800901
Stock: 0
Holding force: 3 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Round Ø30 mm
GM1801601
SKU: GM1801601
Stock: 0
Holding force: 6 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Round Ø36 mm
GM1801801
SKU: GM1801801
Stock: 0
Holding force: 9.5 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Round Ø38 mm
GM1801901
SKU: GM1801901
Stock: 0
Holding force: 17 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Rectangular 55 x 22.5 mm
GM1802001
SKU: GM1802001
Stock: 0
Holding force: 7 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Square 35x35 mm
GM1802201
SKU: GM1802201
Stock: 0
Holding force: 6 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Rectangular 37x22 mm
GM1802601
SKU: GM1802601
Stock: 0
Holding force: 5 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Rectangular 55 x 22.5 mm
GM1803001
SKU: GM1803001
Stock: 0
Holding force: 48 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Size : Ø19 mm
GM1807000
SKU: GM1807000
Stock: 0
Holding force: 70 N
Design_Color: Polished silver
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Size : Ø23 mm
GM1807002
SKU: GM1807002
Stock: 0
Holding force: 100 N
Design_Color: Polished silver
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Size : Ø29 mm
GM1807004
SKU: GM1807004
Stock: 0
Holding force: 130 N
Design_Color: Polished silver
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Round Ø30 mm
GM1808001
SKU: GM1808001
Stock: 0
Holding force: 27 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

Round Ø36 mm
GM1811001
SKU: GM1811001
Stock: 0
Holding force: 35 N
Design_Color: White
Whiteboard magnets are useful for hanging notes, drawings or other papers. They stick to whiteboards, plan boards, office cabinets, warehouse racking and anything containing steel.

Deliverable from stock
Available with extra strong magnet
Moveable, reusable and non-scratch
Coated magnets does not scratch
Steel and plastic version

0.8 N Self-adhesive with foam
GM23000102A
SKU: GM23000102A
Stock: 0
Thickness: 1.5 mm
Roll width: 12.7 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Self-adhesive with foam
GM23001600
SKU: GM23001600
Stock: 0
Thickness: 3 mm
Roll width: 20 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001702A
SKU: GM23001702A
Stock: 0
Thickness: 1.5 mm
Roll width: 12.7 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001702B
SKU: GM23001702B
Stock: 0
Thickness: 1.5 mm
Roll width: 12.7 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001703A
SKU: GM23001703A
Stock: 0
Thickness: 1.5 mm
Roll width: 25.4 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001703B
SKU: GM23001703B
Stock: 0
Thickness: 1.5 mm
Roll width: 25.4 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Strong self-adhesive
GM23001802A
SKU: GM23001802A
Stock: 0
Thickness: 1.5 mm
Roll width: 20 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

0.8 N Self-adhesive with foam
GM23001900
SKU: GM23001900
Stock: 0
Thickness: 2 mm
Roll width: 20 mm
Magnetic strip - magnetic tape or magnetic band - available with or without coloured layer, adhesive or not, extra magnetic force, thin or thick. Because every application requires a different type of flexible magnetic strip, we have a wide selection. The question remains: what are you going to use it for?

For presentation, display or hanging
Deliverable from stock
Available in various adhesive options
Available in various widths

Application

What do you use the magnetic strip for?

The magnetic strip is flexible and easy to trim, cut and process. The magnetic properties are retained. Because it is flexible, it attaches to both flat and curved steel surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
A special self-adhesive makes the magnetic tape suitable for processing on various surface types such as wood, metal, paper and plastics. For indoor and outdoor use.
Available as a match-pole application: magnet on magnet for a perfect fit. The magnetic pole pattern of the both match-pole tapes fit together perfectly. This means both parts fit exactly. The magnetic multipole tapes are a set and are characterized by a smooth surface or groove.
 
Various grades of magnetic strip
Magnetic strip is available in isotropic and anti-isotropic grades. Magnetic material that is not pressed in a magnetic field is called isotropic. An isotropic magnet material can be magnetized in any direction. Isotropic magnets have a lower tensile force than anisotrope magnets.
One-sided multipole or axially magnetized. If the magnetic poles are located on one side of the magnetic material, this is called single-sided multipole magnetized.
The magnetic strip tensile force depends on implementation.
 
Applications: stand construction, technical applications, displays and door profiles.

Composition

What does magnetic strip consist of?

Magnetic strip is made of magnetic powder, composite rubber and other materials. Our magnetic strip does not contain hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion and rolling are processing techniques of rubber bonded magnetic powder. This creates soft flexible magnets. Magnetic tape and magnetic band on rolls are produced by rolling. Magnetic strip or magnetic profile in special shapes are produced by extrusion.
 
The standard colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible. Magnetic strip is usually one-sided multi-pole magnetized.

Storage and processing

How to store magnetic strip

Store magnetic strip in the closed packaging, flat, and at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic strip out of direct sunlight. Shelf life is 12 months. The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking.
Always roll magnetic strip with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer. Process magnetic strip at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Process material in opened packaging within 1 month.

FAQs

Magnetic strip FAQs

If you have a question, we’d be glad to answer it.
Send us an e-mail or call one of our staff: +31 (0)40 221 3283.

Gripper On/Off sensor Hall-effect sensor - double-acting detection
GRIPPER ON/OFF SENSOR MOUNTING
SKU: E0128627
Stock: 168
Power supply: 24 V DC
Sensors and switches are designed for the control, safety and automation of our magnet systems. They are easy to build into our systems. To ensure the safety of our products, the most important sensors are often already built in. This is to guard against, for example, vibration or overheating. Some sensors are optional, for example, for detecting different switching positions (on/off).

Quality and reliability
ATEX II 1/2 D possible
Easily integrated

Magnetic system : Electromagnet
HCT-E-B100-1500-C-R-N
SKU: TCMO100223
Conveying length: 1500 mm
Belt width: 100 mm
A magnetic timing belt transports sheets quickly and with extreme precision to and from tooling machines. This keeps the workpiece position exactly the same between two tooling steps. In this way, a robot places the sheet accurately in the next machine.With permanent or electromagnetic timing belts, you can also transport sheets in a suspended manner.

For sheets up to 5 mm thick
Capable of exact positioning, no slip
Quick start/stop
Easily integrated
With permanent magnets or electromagnets

Application

Transport sheets quickly and precisely

With timing belts, you can move sheets safely and quickly to and from tooling machines. The high speed - up to 3 m/s - and acceleration - up to 6 m/s² - enables high levels of productivity. Transporting sheets in a suspended manner is also possible. The toothed belt determines the exact position.
Timing belt magnet conveyors are available in almost all lengths from 0.5 to 6 m. The products shown - as an example - are 1.5 and 2 m long.
They can be arranged parallel to each other. You can then connect the belts together via sprocket linkage.


Advantages

Advantages of timing belts:
easy to install
compact
modular construction
accurate positioning
no belt slip possible
no slip
quick start/stop - max. acceleration/deceleration 6 m/s²


Design

Permanent magnets or electromagnets

Timing belts are available with permanent magnets or electromagnets.
If only transport is taking place, we use permanent magnets.
When a robot has to remove the steel sheets from the belt, we recommend electromagnets. These can be switched off once the robot arm has taken over the sheet.

Magnetic system : Electromagnet
HCT-E-B100-2000-C-R-N
SKU: TCMO100222
Conveying length: 2000 mm
Belt width: 100 mm
A magnetic timing belt transports sheets quickly and with extreme precision to and from tooling machines. This keeps the workpiece position exactly the same between two tooling steps. In this way, a robot places the sheet accurately in the next machine.With permanent or electromagnetic timing belts, you can also transport sheets in a suspended manner.

For sheets up to 5 mm thick
Capable of exact positioning, no slip
Quick start/stop
Easily integrated
With permanent magnets or electromagnets

Application

Transport sheets quickly and precisely

With timing belts, you can move sheets safely and quickly to and from tooling machines. The high speed - up to 3 m/s - and acceleration - up to 6 m/s² - enables high levels of productivity. Transporting sheets in a suspended manner is also possible. The toothed belt determines the exact position.
Timing belt magnet conveyors are available in almost all lengths from 0.5 to 6 m. The products shown - as an example - are 1.5 and 2 m long.
They can be arranged parallel to each other. You can then connect the belts together via sprocket linkage.


Advantages

Advantages of timing belts:
easy to install
compact
modular construction
accurate positioning
no belt slip possible
no slip
quick start/stop - max. acceleration/deceleration 6 m/s²


Design

Permanent magnets or electromagnets

Timing belts are available with permanent magnets or electromagnets.
If only transport is taking place, we use permanent magnets.
When a robot has to remove the steel sheets from the belt, we recommend electromagnets. These can be switched off once the robot arm has taken over the sheet.

Magnetic system : Permanent magnet
HCT-F-B100-2000-C-N-N
SKU: TCMO100220
Conveying length: 2000 mm
Belt width: 100 mm
A magnetic timing belt transports sheets quickly and with extreme precision to and from tooling machines. This keeps the workpiece position exactly the same between two tooling steps. In this way, a robot places the sheet accurately in the next machine.With permanent or electromagnetic timing belts, you can also transport sheets in a suspended manner.

For sheets up to 5 mm thick
Capable of exact positioning, no slip
Quick start/stop
Easily integrated
With permanent magnets or electromagnets

Application

Transport sheets quickly and precisely

With timing belts, you can move sheets safely and quickly to and from tooling machines. The high speed - up to 3 m/s - and acceleration - up to 6 m/s² - enables high levels of productivity. Transporting sheets in a suspended manner is also possible. The toothed belt determines the exact position.
Timing belt magnet conveyors are available in almost all lengths from 0.5 to 6 m. The products shown - as an example - are 1.5 and 2 m long.
They can be arranged parallel to each other. You can then connect the belts together via sprocket linkage.


Advantages

Advantages of timing belts:
easy to install
compact
modular construction
accurate positioning
no belt slip possible
no slip
quick start/stop - max. acceleration/deceleration 6 m/s²


Design

Permanent magnets or electromagnets

Timing belts are available with permanent magnets or electromagnets.
If only transport is taking place, we use permanent magnets.
When a robot has to remove the steel sheets from the belt, we recommend electromagnets. These can be switched off once the robot arm has taken over the sheet.

Description : Cable reel for demagnetizing low frequency
HDCA
SKU: E0067741
The mobile demagnetization unit is intended for your own use, without the intervention of a Goudsmit specialist.The demagnetizing unit consists of a control box on wheels and a demagnetizing cable on a trolley. A coil is formed by wrapping the cable around a product.The control unit generates a strongly alternating magnetic field of dissipating strength.

Easy to move
For thick-walled or packaged products
For practically every product size

Design

Mobile demag-unit design

The control trolley is equipped with an interface with pre-programmed basic functions with which you, without much knowledge of demagnetizing, can remove magnetism from most common products.
The demagnetization system is automatically configured for use by answering a number of questions on the display. The reel provides a quick means of winding the cable up and off, and the trolley is easy to move around. This provides a compact, flexible demagnetization system for use at a moment’s notice.
This set is also used by our own specialists, who will come to you if you use our on-location demagnetizing service.

Length : 220 mm
HDHH-B-33x220
SKU: EDAR032002
Stock: 10
Power supply: 230 V AC; 50/60 Hz
Demagnetizing tools and machine parts in difficult-to-reach places.Application: in workshops, tool-making shops, machine construction and for watch repairs.

Accurate
Max. penetration depth 10 mm (single sided)
Stainless steel enclosure
Incl. mains lead

Passage diameter : 40 mm
HDHH-O-D40
SKU: EDAR112001
Stock: 4
Power supply: 230 V AC; 50/60 Hz
Ideal for demagnetizing tools and small materials.Application: drill bits and chisels, tools and small parts.

Max. penetration depth 10 mm (single sided)
Plastic enclosure
Incl. mains lead

Diameter : 18 mm
HEPM-EM-D018-011-SW
SKU: GM17801
Stock: 12
Max. holding force: 45 N
Interface/connection dim's: Threaded hole M3
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 25 mm
HEPM-EM-D025-020-SW
SKU: GM17802
Stock: 32
Max. holding force: 140 N
Interface/connection dim's: Threaded hole M4
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 32 mm
HEPM-EM-D032-022-SW
SKU: GM17803
Stock: 35
Max. holding force: 230 N
Interface/connection dim's: Threaded hole M4
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 40 mm
HEPM-EM-D040-025.5-SW
SKU: GM17804
Stock: 8
Max. holding force: 400 N
Interface/connection dim's: Threaded hole M5
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 50 mm
HEPM-EM-D050-027-SW
SKU: GM17805
Stock: 26
Max. holding force: 700 N
Interface/connection dim's: Threaded hole M5
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 63 mm
HEPM-EM-D065-030-SW
SKU: GM17806
Stock: 12
Max. holding force: 1000 N
Interface/connection dim's: Threaded hole M8
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 80 mm
HEPM-EM-D080-038-SW
SKU: GM17808
Stock: 10
Max. holding force: 2200 N
Interface/connection dim's: Threaded hole M8
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 100 mm
HEPM-EM-D100-043-SW
SKU: GM17810
Stock: 7
Max. holding force: 3400 N
Interface/connection dim's: Threaded hole M10
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 20 mm
HEPM-EP-D020-022-SW
SKU: GM17852
Stock: 11
Max. holding force: 40 N
Interface/connection dim's: Threaded hole M4
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 35 mm
HEPM-EP-D035-028-SW
SKU: GM17853
Stock: 11
Max. holding force: 160 N
Interface/connection dim's: Threaded hole M4
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 55 mm
HEPM-EP-D055-036-SW
SKU: GM17855
Stock: 15
Max. holding force: 420 N
Interface/connection dim's: Threaded hole M5
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Diameter : 90 mm
HEPM-EP-D090-048-SW
SKU: GM17859
Stock: 3
Max. holding force: 1200 N
Interface/connection dim's: Threaded hole M8
Electro holding magnets are used for picking up, positioning and holding steel items. The round shape and a threaded hole at the bottom make them ideal for building into existing systems.These magnets are switched on and off with an electrical voltage.

For picking up, positioning or holding products
Switching: electric
Easy to install
Lifting power: up to 170 kg
Electropermanent or electromagnet

Application

Electro holding magnets can be used as:

Door magnets
Holding magnets are an essential component of a door magnet system. With the correct electromagnet, you build a secure system for automatically opening, closing or locking doors.
 
Pick & place magnet
Round electro holding magnets have a shallow magnetic field. This makes them particularly suitable for picking up, holding and unloading thin steel objects, up to 10 mm thick.
 
A known problem when picking up thin sheets with a powerful electro holding magnet is a too deep magnetic field radiation which causes the system to pick up several sheets at once. The use of many small electromagnets prevents this.
The maximum shear force is approximately 1/4 of the maximum holding force.
 
The central threaded hole on the back makes assembly very simple.

Working principle

Switchable with electric voltage

There are 2 types:
Electromagnet type attracts a steel object upon switching on the coil in the magnet. When the coil is switched off, the magnet immediately releases.
 
Electro-permanent magnet type possesses permanent magnet force. When the coil is turned off, the magnet pulls the workpiece. Switching on the coil neutralizes the permanent magnetic force. The magnet is now out of operation and immediately releases the workpiece.
 
These magnets are an ideal solution when you need to reliably hold the workpiece in the unpowered state.

Switching/power supply

Control of electro holding magnets

For the electrical switching and power supply of the magnets, a control cabinet is needed. These can be found in the accessories tab of the product variants.

Spring plunger M8 | Fixed
HGA-PL-S- M08-M24-NR-RI
SKU: TPGC990009
Stock: 97
Various accessories that can be added to our products as an option. Also found under the ‘Accessories' tab of the relevant article.

Quality and reliability
Fast delivery
Easy to install
Longtime use

Application

Cleaning unit application

In order to easily clean the magnet unit and to ensure operator safety, Goudsmit has developed the magnet rotor cleaning unit. It is available as an accessory with the rotating Cleanflow magnet. With this cleaning unit, the magnetic bars are easily removed from the extractor and securely placed on the tray. This keeps the magnet clean, preventing it from falling on the ground or being attracted by a steel object. The magnet is then easily accessible from all sides and therefore easy to clean. Even if the magnet unit is saturated with attracted metal particles, and the magnetic bars are therefore very difficult to remove from the extractor, this is not a problem with the cleaning unit. The tray collects the attracted iron parts.

Spring plunger M8 | Flexible
HGA-PL-S-M08-M24-RO-FL
SKU: TPGC990008
Stock *: 0
Various accessories that can be added to our products as an option. Also found under the ‘Accessories' tab of the relevant article.

Quality and reliability
Fast delivery
Easy to install
Longtime use

Application

Cleaning unit application

In order to easily clean the magnet unit and to ensure operator safety, Goudsmit has developed the magnet rotor cleaning unit. It is available as an accessory with the rotating Cleanflow magnet. With this cleaning unit, the magnetic bars are easily removed from the extractor and securely placed on the tray. This keeps the magnet clean, preventing it from falling on the ground or being attracted by a steel object. The magnet is then easily accessible from all sides and therefore easy to clean. Even if the magnet unit is saturated with attracted metal particles, and the magnetic bars are therefore very difficult to remove from the extractor, this is not a problem with the cleaning unit. The tray collects the attracted iron parts.

Spring plunger M10 | Fixed
HGA-PL-S-M10-M24-NR-RI
SKU: TPGC990025
Stock: 2
Various accessories that can be added to our products as an option. Also found under the ‘Accessories' tab of the relevant article.

Quality and reliability
Fast delivery
Easy to install
Longtime use

Application

Cleaning unit application

In order to easily clean the magnet unit and to ensure operator safety, Goudsmit has developed the magnet rotor cleaning unit. It is available as an accessory with the rotating Cleanflow magnet. With this cleaning unit, the magnetic bars are easily removed from the extractor and securely placed on the tray. This keeps the magnet clean, preventing it from falling on the ground or being attracted by a steel object. The magnet is then easily accessible from all sides and therefore easy to clean. Even if the magnet unit is saturated with attracted metal particles, and the magnetic bars are therefore very difficult to remove from the extractor, this is not a problem with the cleaning unit. The tray collects the attracted iron parts.

Spring plunger M10 | Flexible
HGA-PL-S-M10-M24-RO-FL
SKU: TPGC990001
Stock: 184
Various accessories that can be added to our products as an option. Also found under the ‘Accessories' tab of the relevant article.

Quality and reliability
Fast delivery
Easy to install
Longtime use

Application

Cleaning unit application

In order to easily clean the magnet unit and to ensure operator safety, Goudsmit has developed the magnet rotor cleaning unit. It is available as an accessory with the rotating Cleanflow magnet. With this cleaning unit, the magnetic bars are easily removed from the extractor and securely placed on the tray. This keeps the magnet clean, preventing it from falling on the ground or being attracted by a steel object. The magnet is then easily accessible from all sides and therefore easy to clean. Even if the magnet unit is saturated with attracted metal particles, and the magnetic bars are therefore very difficult to remove from the extractor, this is not a problem with the cleaning unit. The tray collects the attracted iron parts.

Spring plunger M12 | Fixed
HGA-PL-S-M12-M24-NR-RI
SKU: TPGC990032
Stock: 46
Various accessories that can be added to our products as an option. Also found under the ‘Accessories' tab of the relevant article.

Quality and reliability
Fast delivery
Easy to install
Longtime use

Application

Cleaning unit application

In order to easily clean the magnet unit and to ensure operator safety, Goudsmit has developed the magnet rotor cleaning unit. It is available as an accessory with the rotating Cleanflow magnet. With this cleaning unit, the magnetic bars are easily removed from the extractor and securely placed on the tray. This keeps the magnet clean, preventing it from falling on the ground or being attracted by a steel object. The magnet is then easily accessible from all sides and therefore easy to clean. Even if the magnet unit is saturated with attracted metal particles, and the magnetic bars are therefore very difficult to remove from the extractor, this is not a problem with the cleaning unit. The tray collects the attracted iron parts.

Spring plunger M12 | Flexible
HGA-PL-S-M12-M24-RO-FL
SKU: TPGC990003
Stock *: 0
Various accessories that can be added to our products as an option. Also found under the ‘Accessories' tab of the relevant article.

Quality and reliability
Fast delivery
Easy to install
Longtime use

Application

Cleaning unit application

In order to easily clean the magnet unit and to ensure operator safety, Goudsmit has developed the magnet rotor cleaning unit. It is available as an accessory with the rotating Cleanflow magnet. With this cleaning unit, the magnetic bars are easily removed from the extractor and securely placed on the tray. This keeps the magnet clean, preventing it from falling on the ground or being attracted by a steel object. The magnet is then easily accessible from all sides and therefore easy to clean. Even if the magnet unit is saturated with attracted metal particles, and the magnetic bars are therefore very difficult to remove from the extractor, this is not a problem with the cleaning unit. The tray collects the attracted iron parts.

Diameter : 42 mm
HGC-RO-040-VR-R-M-F
SKU: TPMV040028
Stock: 37
Advised working load: 47 N
The MagVacu combi gripper combines vacuum with magnetic force.With this pneumatically-switched gripper, you can pick up both ferromagnetic and non-ferromagnetic, flat objects. Such as stainless steel or aluminium sheets.

Also for non-ferromagnetic sheets
Switching: pneumatic
For robot End-of-arm tooling
Lifting power: up to 40 kg
Permanent magnet + vacuum force

Application

Using the combi gripper

With combined vacuum and magnetic force, the MagVacu combi gripper handles both ferromagnetic and non-ferromagnetic sheet material. It is suitable for picking up or gripping flat:

punched or perforated steel parts
non-ferromagnetic materials, such as aluminium and stainless steel

Examples:

automated processes on laser cutting machines
robotized press brake and press transfer systems in the automotive and sheet metal industries


Advantages

Benefits compared to vacuum grippers:
no need to convert the gripper for handling different products, so more types of products can be handled by unmanned machines;
twice as powerful, thus safer;
the magnet prevents the vacuum from leaking;
suitable for materials such as steel, aluminium and stainless steel.


Operation

Switching and control of combi gripper

The MagVacu Combi gripper is switched pneumatically.
Control is possible via a 5/3 valve in combination with a vacuum connection, or with a Goudsmit vacuum blow-off valve (see accessories).