Applications
Level measurement
Proximity
Obstacle avoidance
Traffic control
Flow measurement
Specs English
Specs German
Specs Spanish

Applications
Level measurement
Proximity
Obstacle avoidance
Traffic control
Specs English
Specs German
Specs Spanish

Applications
Powder, granular, slurry, and liquid
Long-range level measurement
Specs English
Specs German
Specs Spanish

Wind Speed and Direction
Heading
Pitch and Roll
Air Temperature
Low Temperature Operations
Barometric Pressure
Position, and speed & course over ground
Data Input/Output
3 Axis Accelerometer
Ultrasonic Transducers
GPS
3 Axis Compass
Thermistor
Heater Element
Barometric Pressure
Comma delimited ASCII/NMEA 0183 over RS422 or RS23

Designed for AUVs and ROVs

The 200m Mini Altimeter Kit is an ultra-compact altimeter kit designed for measuring height off the sea floor and underwater structures. Rated for up to 1,000 meters, the 200m Mini Altimeter delivers 99.4% accuracy at full 200 meter range with output resolution to 1 cm. The 200m Mini Altimeter delivers excellent performance from a small, lightweight configuration optimized for use on USVs and AUVs. The sensor is available in either 170 kHz or 200 kHz. With low power consumption of just 150 mA at 12 V, the 200m Mini Altimeter is perfect for powerlimited vessels. Optional water temp sensor available.

In full auto mode, the sounding rate is variable with depth; in manual mode, the sounding rate is configurable to run up to 10X per second. The data output rate and ping rate are the same in manual mode, and one ping produces one depth output. In full auto mode, the data output rate is configurable (0.1 to 25 seconds per interval). The 200m Mini Altimeter communicates NMEA 0183 serial data protocol over RS232 or RS422.

The kits consist of a 1000 m rated transducer with 15.5" (39.4 cm) cable with connector, matching bulkhead connector, transceiver board with mounting hardware, and wiring diagram. Water temp sensor optional.


View the Design Spec
View the Technical Manual

AIRMAR’s low profile ultrasonic transducer features a robust PEEK housing suitable for in-pipe flow monitoring systems. As an essential part of a these system, our transducers are deployed for measuring sewage levels, pipe flow rate, potential blockage detection as well as irrigation ditch water levels. OEM’s have their choice of M16 or M28 THREADED housings.

Applications
In-Pipe Flow Monitoring
Open Channel Flow
Wastewater Industry

AIRMAR’s low profile ultrasonic transducer features a robust PEEK housing suitable for in-pipe flow monitoring systems. As an essential part of a these system, our transducers are deployed for measuring sewage levels, pipe flow rate, potential blockage detection as well as irrigation ditch water levels. OEM’s have their choice of M16 or M28 THREADED housings.

Applications
In-Pipe Flow Monitoring
Open Channel Flow
Wastewater Industry

AIRMAR’s WeatherStation 150WXS provides accurate, site-specific, weather data from a single compact device. As an integral component of a comprehensive weather station, the WeatherStation WXS measures seven critical weather parameters in real-time.

The compact housing features ultrasonic wind and barometric pressure measurements. Plus the solar radiation shield increases the accuracy of temperature and relative humidity readings. The maintenance-free features of the WeatherStation WXS makes it perfect for remote mounting as a network of stationary or moveable sensors.

Position, and time stamping
Heading
Pitch and Roll
Wind Speed and Direction
Ultrasonic Wind Measurement
Solar Radiation Shield
Air Temperature
Relative Humidity
Barometric Pressure
Data Input/Output
3 Axis Accelerometer
Solar Radiation Shield
Wind Measurement
Ultrasonic Transducers
GPS
RH Sensor
Thermistor
2 Axis Compass
Barometric Pressure
Comma delimited ASCII/NMEA 0183 over RS422 or RS232, NMEA 2000® CAN

AIRMAR’s WeatherStation WXRS provides real-time information on rain intensity, accumulation and event duration. An acoustic sensor measures the impact energy of individual raindrops on the patented “umbrella” sensor located on the top of the WeatherStation instrument. This rain detecting sensor is virtually maintenance free as it has no moving parts or components that need to be emptied, cleaned or will become clogged by debris.

With minimal maintenance plus the integration of a full suite of ultrasonic wind, temperature, barometric pressure and relative humidity, WeatherStation WXRS delivers a significantly lower total cost of ownership (TCO) than traditional measurement devices.

Acoustic Rain Measurement
Position, and time stamping
Heading
Pitch and Roll
Wind Speed and Direction
Ultrasonic Wind Measurement
Solar Radiation Shield
Air Temperature
Relative Humidity
Barometric Pressure
Data Input/Output
3 Axis Accelerometer
Solar Radiation Shield
Rain Measurement
Wind Measurement
Ultrasonic Transducers
GPS
RH Sensor
Thermistor
2 Axis Compass
Barometric Pressure
Comma delimited ASCII/NMEA 0183 over RS422 or RS232, NMEA 2000® CAN

Wind Speed and Direction
Pitch and Roll
Air Temperature
Low Temperature Operations
Barometric Pressure
Power Supply
Data Input/Output
3 Axis Accelerometer
Ultrasonic Transducers
Thermistor
Heater Element
Barometric Pressure
12 VDC Supply Current
Comma delimited ASCII/NMEA 0183 over RS422 or RS232

The model 110WXS is AIRMAR’s entry level solution for stationary, land-based weather monitoring applications. A complete multisensor WeatherStation, the 110WXS features a solar radiation shield for increased accuracy and stability of temperature and relative humidity. Ultrasonic wind measurement of wind speed and angle is virtually maintenance-free with no moving parts to wear out. Barometric pressure, as well as calculated wind chill and heat index round out the critical parameters being measured. The durable, rugged housing is IPX4 or IPX6 rated and designed to be deployed as an integral component for land-based stations.

Wind Speed and Angle
Ultrasonic Wind Measurement
Solar Radiation Shield
Air Temperature
Relative Humidity
Barometric Pressure
Data Input/Output
Solar Radiation Shield
Wind Measurement
Ultrasonic Transducers
RH Sensor
Thermistor
Barometric Pressure
Comma delimited ASCII/NMEA 0183 over RS422 or RS232, NMEA 2000® CAN

NOTE: AIRMAR NO LONGER MANUFACTURES THIS PRODUCT

The 100WX offers a truly best-in-class solution at a better price than any other weather monitoring system on the market today.

Reliability and superior accuracy, along with no moving parts and plug and play installation, makes the 100WX an easy and affordable choice for any weather solution. The Airmar WX WeatherStation® instruments are unique, as they are the only weather monitoring system to offer true and apparent wind speed and direction in one compact housing—without the need for additional sensors. Ideal for stationary applications, the 100WX model offers apparent wind speed and direction, air temperature, and barometric pressure readings.

The many new benefits of the WX Series include:

Removable humidity sensor that is field serviceable
IPX6 waterproof rating (units with the relative humidity module are IPX4 waterproof rated)
New power supply featuring a 50% reduction in current draw for use in remote locations that use solar or battery power
Wider operating voltage range of 9-40 VDC
Adjustable, unfiltered wind data for monitoring maximum gust conditions
Output via a single cable (various lengths available) for power and either RS232 (NMEA 0183) or RS-422 standard (NMEA 0183) and CAN bus (NMEA 2000®) data interface
WeatherCaster™ PC software for viewing and customizing data sentences