Flowmeter incl. measurement section with flanged connection DN 50, Measuring range 2.0 - 1195 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 118x102, Roll of 20 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Stainless steel filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Stainless steel filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 118x102, Roll of 10 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 118x102, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Stainless steel casting filter regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 1.7 - 17.5 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting filter regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 0.4 - 4.0 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Leak detector incl. accessories in a practical case, Ultrasonics measurement technology, Working temperature 0 °C to 40 °C
PRINCIPLE:
High and avoidable energy costs are caused every year by leaks in compressed air and gas installations.

Noise in the ultrasonic range is caused by gases escaping from leaks. These ultrasonic sounds are not audible to the human ear.

The LS 200 leak detector picks up even smallest leaks from a distance of several metres. How? It transformst he inaudible ultrasonic sounds into a frequency that can be detected visually on the display and acoustically with the aid oft he soundproof headphones.

The LS 200 is the further development of the proven LS 100 and features a significantly refined sensor technology that effectively improves the detection of leaks. The display is optimized by enlarging the display. The integrated laser pointer is used for target bearing. This allows leaks tob e located precisely.

The specially designed bell achieves a better bundling of the sound waves. This horn achts like a directional microphone. Disturbing backgrounds noises, for example those that occur during operation, are suppressed or faded out. This makes it easier to locate leaks even in areas that are difficult to access.

APPLICATIONS:
Leak detection in compressed air, gas, steam and vacuum systems. Not suitable for helium.

ADVANTAGES:

Simple and fast measurement – even from a distance of several meters.
Measurements can be carried out during operation without impairing it.
Short payback time oft he device due to high cost savings.
Loud background noise does not affect the quality oft he measurements in any way, since the acoustic frequency works in the ultrasonic range.
Safe and easy handling.
CONNECTION:

Mains adapter socket for external charging unit
3.5-mm jack plug for headphones
SCOPE OF DELIVERY IN A PRACTICAL SUITCASE SET:

Leak detector with ultrasonic sensor
Acoustic trumpet
Focus tube with focus tip
Soundproof, ergonomic headphones
Power supply unit/charger
Carrying case

High and avoidable energy costs are caused every year by leaks in compressed air and gas installations.

Noise in the ultrasonic range is caused by gases escaping from leaks. These ultrasonic sounds are not audible to the human ear.

The LS 200 leak detector picks up even smallest leaks from a distance of several metres. How? It transformst he inaudible ultrasonic sounds into a frequency that can be detected visually on the display and acoustically with the aid oft he soundproof headphones.

The LS 200 is the further development of the proven LS 100 and features a significantly refined sensor technology that effectively improves the detection of leaks. The display is optimized by enlarging the display. The integrated laser pointer is used for target bearing. This allows leaks tob e located precisely.

The specially designed bell achieves a better bundling of the sound waves. This horn achts like a directional microphone. Disturbing backgrounds noises, for example those that occur during operation, are suppressed or faded out. This makes it easier to locate leaks even in areas that are difficult to access.

APPLICATIONS:
Leak detection in compressed air, gas, steam and vacuum systems. Not suitable for helium.

ADVANTAGES:

CONNECTION:

SCOPE OF DELIVERY IN A PRACTICAL SUITCASE SET:

Flowmeter incl. measurement section with flanged connection DN 40, Measuring range 1.0 - 730 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with flanged connection DN 32, Measuring range 0.7 - 530 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 106x90, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 90x76, Roll of 20 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 96x80, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Portable hand-held measurement unit for industrial applications with integrated data logger
Portable hand-held measurement unit with integrated data logger suitable for flowmeters, for industrial applications such as measurement of consumption and flow, pressure and vacuum, temperature, residual moisture and dew point.
With its 3.5" graphical display, measured values can also be displayed on curves in colour. Up to 100 million measured values can be stored and then transmitted to the PC via USB stick. An additional software package also allows data to be conveniently evaluated on the PC, for example for long-term measurements/analyses or simple, quick setup of service reports.

- Universal sensor input for many current signals: 0 - 1/10 V, 0/4 - 20 mA, Pt 100, Pt 1000, pulse,
Modbus, etc.
- Rechargeable lithium ion batteries for > 4 hours control station operation depending on the
external sensors
- 3.5" transmissive TFT touch panel, graphics, curves, statistics
- Integrated data logger
- Integrated USB interface
- Up to 8 languages available for selection
- Graphical and/or tabular reports
- Power supply for sensors: Output voltage 24 VDC ± 10%, output current 120 mA in continuous operation
- Dimensions: 82 x 96 x 245 mm
- Weight: 450 g
- Housing material: PC/ABS
- Working temperature: 0 °C to +50 °C
- Memory space: 4 GB – standard memory card

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 118x102, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Flowmeter incl. measurement section with threaded connection R 2, DN 50, Measuring range 2.0 - 1195 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with flanged connection DN 25, Measuring range 0.5 - 290 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Storz reducer, Stainless steel V4A, Storz size 110-A/100, Tappet distance 133/115 mm, Operating pressure max. 16 bar
High-quality series in V4A stainless steel. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Industrial plant engineering, shipbuilding, chemical industry.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 105x90, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

2-way stainless steel ball valve, Pneumat. actuation drive, single-acting, Operating temp. -20 °C to 70 °C, Rp 3, PN max. 63 bar
2-way cock, 3-piece, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Flowmeter incl. measurement section with flanged connection DN 20, Measuring range 0.3 - 170 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with threaded connection R 1 1/2, DN 40, Measuring range 1.0 - 730 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with threaded connection R 1 1/4, DN 32, Measuring range 0.7 - 530 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 2, Control range 1.5 - 20 bar
Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence
minimal friction.
Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Compact flange ball valve, Pneumat. actuation drive, double-acting, Stainless steel, Operating temp. -10°C to 200°C, PN max 16 bar
2-way ball valves compact flange type, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Calibration test and service equipment, Measurement range -0.95 / +40 bar, G 1/4, incl. factory calibration certificate
Service case for quick and precise pressure gauge calibration.
Suitable for service and maintenance providers of all kinds as well as instrumentation control workshops and quality assurance.
Simple operation using four buttons. The high sampling rate (100 measurements / second) guarantees an accurate analysis at the measuring point.

Comprised of a CPG500 digital gauge and a CPP40 pneumatic hand test pump with a connecting cable for pressure generation. Operating manual, calibration certificate 3.1, two AA batteries and a protective rubber cap for the housing are enclosed.
Includes a plastic emergency case with foam padding.

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 84x70, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Flowmeter incl. measurement section with flanged connection DN 15, Measuring range 0.2 - 90 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 2000, G 3/8, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Stainless steel pressure regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Stainless steel pressure regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 95x80, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Angle flange, ISO 15552, ISO 21287, Ø40, 1 piece with 4 screws
Angle flange

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 90x76, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 90x76, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

2/2-way solenoid valve brass, NO, force pilot operated, 230 V, 50-60 Hz, Rp 1 1/2, NBR, Medium temp. -20 °C to 85 °C, PN 0 - 9 bar
Standard series, proven over many years, available in three different versions

- Directly operated
- Combined operation
- Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Hose reel for compressed air / water, PU hose ø 10x6.5, Operating temperature -10 °C to 40 °C, PN max. 10 bar, Hose length 10 m
Heavy-duty steel design for industrial applications. Blue, powder-coated housing.
An automatic latching mechanism allows the hose to be engaged at any length. Enclosed spring. Precise locking device for continuous feeding or latching mechanism. Reel guide prevents excessive wear on the hose.

Flowmeter incl. measurement section with threaded connection R 1, DN 25, Measuring range 0.5 - 290 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with threaded connection R 3/4, DN 20, Measuring range 0.3 - 170 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

2-way stainless steel ball valve, Pneumat. actuation drive, double-acting, Operating temp. -20 °C to 70 °C, Rp 3, PN max. 63 bar
2-way cock, 3-piece, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 1400, G 3/8, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Counter display with hose rupture valve, Air gun with noise-reducing Star-Tip nozzle, Protective shields and silencer nozzles
Counter displays offer a cross-section of safety-relevant products for compressed air applications. Make your checkout area more attractive and increase your turnover through counter sales. These eye-catching counter displays underline your expertise in the pneumatics world.

The safety guns are equipped with a standard 1/4” female thread. Easy to connect using stems of various sizes or coupling plugs from our product range.

Counter display selection of 40 different safety products, comprising:
6 x variable-control blow gun with noise-reducing Star-Tip nozzle
6 x hose rupture valve G 1/4
5 x hose rupture valve G 3/8
5 x hose rupture valve G 1/2
6 x hose rupture valve G 3/4
6 x chip shield, fits directly onto the tube
6 x silencer nozzle, fits directly onto the tube

Counter display with 15 x variable-control blow gun with noise-reducing Star-Tip nozzle.

Industrial water hose, SBR, Temperature -30 °C to 80 °C, Hose Ø 79x63, PN max. 10 bar, Burst pressure 30 bar, Roll of 40 m
Industrial water hose for use with process water, liquid manure or weak acids and
alkaline solutions.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 1.7 - 17.5 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 0.4 - 4.0 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Hose clamp strip, Polyethylene, blue, for hose with exterior Ø 8 mm

Flowmeter incl. measurement section with threaded connection R 1/4, DN 8, Measuring range 0.8 - 90 l/min, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with threaded connection R 1/2, DN 15, Measuring range 0.2 - 90 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Suction / pressure hose, Rubber, SBR, Temperature -30 °C to 80 °C, Vacuum 0.8 bar, PN max. 10 bar, Hose Ø 30x19, Roll of 40 m
Rubber hose with spiral steel wire embedded in the wall

Suitable for process water, liquid manure or weak acids and alkaline solutions
Extremely flexible and non-toxic.

IMPORTANT:
These hoses are shipped from our distribution centre in the Netherlands using a forwarding agent.

2-way stainless steel ball valve, Pneumat. actuation drive, single-acting, Operating temp. -20°C to 70°C, Rp 2 1/2, PN max 63 bar
2-way cock, 3-piece, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

3-way stainless steel ball valve, Pneumat. actuation drive, L-hole, Operating temp. -20°C to 70°C, Rp 2, DN 50, PN max. 63 bar
3-way cock, reduced bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 1200, G 3/8, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Check valve, DN 65, Red brass, Metallic sealing, Operating temperature -10 °C to 80 °C, G 2 1/2, PN max. 16 bar
Applications: Water (no steam), neutral and non-corrosive liquid media, mineral oils.

Only suitable for liquid media. Flap valve closes by gravity, therefore only possible to be installed horizontally!

Compact flange ball valve, Pneumat. actuation drive, double-acting, Stainless steel, Operating temp. -10°C to 200°C, PN max 16 bar
2-way ball valves compact flange type, full bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

2-way stainless steel ball valve, Electr. actuation drive, 230 V AC, 50 Hz, Medium temp. -10 °C to 200 °C, Rp 2, PN max. 63 bar
Voltage range 230 VAC, 50 Hz or 24 VDC.
Reversible electric rotary actuator.