Flowmeter incl. measurement section with flanged connection DN 50, Measuring range 2.0 - 1195 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Stainless steel filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Stainless steel filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Stainless steel casting filter regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 1.7 - 17.5 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting filter regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 0.4 - 4.0 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting filter regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel filter regulators with self-relieving (not for liquid media) for use in the chemical industry, mining, plant construction and special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Leak detector incl. accessories in a practical case, Ultrasonics measurement technology, Working temperature 0 °C to 40 °C
PRINCIPLE:
High and avoidable energy costs are caused every year by leaks in compressed air and gas installations.

Noise in the ultrasonic range is caused by gases escaping from leaks. These ultrasonic sounds are not audible to the human ear.

The LS 200 leak detector picks up even smallest leaks from a distance of several metres. How? It transformst he inaudible ultrasonic sounds into a frequency that can be detected visually on the display and acoustically with the aid oft he soundproof headphones.

The LS 200 is the further development of the proven LS 100 and features a significantly refined sensor technology that effectively improves the detection of leaks. The display is optimized by enlarging the display. The integrated laser pointer is used for target bearing. This allows leaks tob e located precisely.

The specially designed bell achieves a better bundling of the sound waves. This horn achts like a directional microphone. Disturbing backgrounds noises, for example those that occur during operation, are suppressed or faded out. This makes it easier to locate leaks even in areas that are difficult to access.

APPLICATIONS:
Leak detection in compressed air, gas, steam and vacuum systems. Not suitable for helium.

ADVANTAGES:

Simple and fast measurement – even from a distance of several meters.
Measurements can be carried out during operation without impairing it.
Short payback time oft he device due to high cost savings.
Loud background noise does not affect the quality oft he measurements in any way, since the acoustic frequency works in the ultrasonic range.
Safe and easy handling.
CONNECTION:

Mains adapter socket for external charging unit
3.5-mm jack plug for headphones
SCOPE OF DELIVERY IN A PRACTICAL SUITCASE SET:

Leak detector with ultrasonic sensor
Acoustic trumpet
Focus tube with focus tip
Soundproof, ergonomic headphones
Power supply unit/charger
Carrying case

High and avoidable energy costs are caused every year by leaks in compressed air and gas installations.

Noise in the ultrasonic range is caused by gases escaping from leaks. These ultrasonic sounds are not audible to the human ear.

The LS 200 leak detector picks up even smallest leaks from a distance of several metres. How? It transformst he inaudible ultrasonic sounds into a frequency that can be detected visually on the display and acoustically with the aid oft he soundproof headphones.

The LS 200 is the further development of the proven LS 100 and features a significantly refined sensor technology that effectively improves the detection of leaks. The display is optimized by enlarging the display. The integrated laser pointer is used for target bearing. This allows leaks tob e located precisely.

The specially designed bell achieves a better bundling of the sound waves. This horn achts like a directional microphone. Disturbing backgrounds noises, for example those that occur during operation, are suppressed or faded out. This makes it easier to locate leaks even in areas that are difficult to access.

APPLICATIONS:
Leak detection in compressed air, gas, steam and vacuum systems. Not suitable for helium.

ADVANTAGES:

CONNECTION:

SCOPE OF DELIVERY IN A PRACTICAL SUITCASE SET:

Flowmeter incl. measurement section with flanged connection DN 40, Measuring range 1.0 - 730 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with flanged connection DN 32, Measuring range 0.7 - 530 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Portable hand-held measurement unit for industrial applications with integrated data logger
Portable hand-held measurement unit with integrated data logger suitable for flowmeters, for industrial applications such as measurement of consumption and flow, pressure and vacuum, temperature, residual moisture and dew point.
With its 3.5" graphical display, measured values can also be displayed on curves in colour. Up to 100 million measured values can be stored and then transmitted to the PC via USB stick. An additional software package also allows data to be conveniently evaluated on the PC, for example for long-term measurements/analyses or simple, quick setup of service reports.

- Universal sensor input for many current signals: 0 - 1/10 V, 0/4 - 20 mA, Pt 100, Pt 1000, pulse,
Modbus, etc.
- Rechargeable lithium ion batteries for > 4 hours control station operation depending on the
external sensors
- 3.5" transmissive TFT touch panel, graphics, curves, statistics
- Integrated data logger
- Integrated USB interface
- Up to 8 languages available for selection
- Graphical and/or tabular reports
- Power supply for sensors: Output voltage 24 VDC ± 10%, output current 120 mA in continuous operation
- Dimensions: 82 x 96 x 245 mm
- Weight: 450 g
- Housing material: PC/ABS
- Working temperature: 0 °C to +50 °C
- Memory space: 4 GB – standard memory card

Flowmeter incl. measurement section with threaded connection R 2, DN 50, Measuring range 2.0 - 1195 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with flanged connection DN 25, Measuring range 0.5 - 290 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Frequency:50 Hz
Speed:2900 1/min
Shaft Output:3299 W
Volume Flow:2013 m³/h
Pressure:Δp s3882 Pa
Pressure:Δp t4013 Pa
Density:43862 kg/m³
Sound Pressure:93 dB(A)

Flowmeter incl. measurement section with flanged connection DN 20, Measuring range 0.3 - 170 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with threaded connection R 1 1/2, DN 40, Measuring range 1.0 - 730 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with threaded connection R 1 1/4, DN 32, Measuring range 0.7 - 530 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 2, Control range 1.5 - 20 bar
Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence
minimal friction.
Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

Calibration test and service equipment, Measurement range -0.95 / +40 bar, G 1/4, incl. factory calibration certificate
Service case for quick and precise pressure gauge calibration.
Suitable for service and maintenance providers of all kinds as well as instrumentation control workshops and quality assurance.
Simple operation using four buttons. The high sampling rate (100 measurements / second) guarantees an accurate analysis at the measuring point.

Comprised of a CPG500 digital gauge and a CPP40 pneumatic hand test pump with a connecting cable for pressure generation. Operating manual, calibration certificate 3.1, two AA batteries and a protective rubber cap for the housing are enclosed.
Includes a plastic emergency case with foam padding.

REO444 US S C1 100V 7x9 C
Industrial Applications Imperial Dimensions for USA. UL Approved
Also referred to as REO444US, REO 444US, RE0444US, RE0 444US

60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
This tacho is identical to the standard REO444R1B0.06EG but has a double 60V output and is longer in length
The REO444R2B006EG Tachogenerator Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
Part Number /0000035
The REO444 range are no longer 'UL' or 'CSA' approved.

Flowmeter incl. measurement section with flanged connection DN 15, Measuring range 0.2 - 90 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 2000, G 3/8, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Stainless steel pressure regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Stainless steel pressure regulator, 1.4401, with secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by hexagon head screw.

Angle flange, ISO 15552, ISO 21287, Ø40, 1 piece with 4 screws
Angle flange

Flowmeter incl. measurement section with threaded connection R 1, DN 25, Measuring range 0.5 - 290 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Industrial Applications, Machine Tools, Robots (60v)
Also referred to as RDC 205, RDC 207

REO444R1B 0.15V
Code = REO444R1B0.15EG
60V Flange Mounted is used as speed monitoring device. They convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply. Radio Energie tachogenerator is most often used when mounted on to the back of a DC Motor. It supplies the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 60V/1000RPM.
IP54
Part Number /0000025
The REO444 range are no longer 'UL' or 'CSA' approved.

Flowmeter incl. measurement section with threaded connection R 3/4, DN 20, Measuring range 0.3 - 170 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 1400, G 3/8, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Counter display with hose rupture valve, Air gun with noise-reducing Star-Tip nozzle, Protective shields and silencer nozzles
Counter displays offer a cross-section of safety-relevant products for compressed air applications. Make your checkout area more attractive and increase your turnover through counter sales. These eye-catching counter displays underline your expertise in the pneumatics world.

The safety guns are equipped with a standard 1/4” female thread. Easy to connect using stems of various sizes or coupling plugs from our product range.

Counter display selection of 40 different safety products, comprising:
6 x variable-control blow gun with noise-reducing Star-Tip nozzle
6 x hose rupture valve G 1/4
5 x hose rupture valve G 3/8
5 x hose rupture valve G 1/2
6 x hose rupture valve G 3/4
6 x chip shield, fits directly onto the tube
6 x silencer nozzle, fits directly onto the tube

Counter display with 15 x variable-control blow gun with noise-reducing Star-Tip nozzle.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 1.7 - 17.5 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1 1/2, Control range 0.4 - 4.0 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1, Control range 1.7 - 17.5 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Stainless steel casting pressure regulator, 1.4401, secondary venting (reversible), Size 4, G 1, Control range 0.4 - 4.0 bar
Stainless steel regulators for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.
Pressure setting by T-handle.

Flowmeter incl. measurement section with threaded connection R 1/4, DN 8, Measuring range 0.8 - 90 l/min, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Flowmeter incl. measurement section with threaded connection R 1/2, DN 15, Measuring range 0.2 - 90 m³/h, PN max. 16 bar
Calorimetric measurement system for monitoring changes in flow and consumption as well as for leak
and energy efficiency measurements. No additional pressure or temperature compensation is necessary.
All measured values are recorded digitally, making very rapid, high-precision measurement possible.
High measurement accuracy due to defined measurement section.

- Display: Current consumption in l/min, m³/hr, etc. and total consumption (meter reading) in m³, l, etc.
- Total consumption (meter reading) can be reset to “zero” with keypad
- Display can pivot 180°, measuring device can be unscrewed
- Measured quantities: m³/hr, l/min (1000 mbar, 20 °C) for compressed air or
Nm³/h, Nl/min (1013 mbar, 0 °C) for gases
- Units: m³/hr, m³/min, l/min, etc. can be selected with keypad
- Gas types: Compressed air (= standard),
other gas types such as nitrogen, argon, CO2, etc. can be selected with hand-held measurement unit
- Accuracy: ± 1.5% of measured value
- Digital output: RS 485 interface, Modbus RTU for connecting to energy management systems,
building management systems, etc.
- Housing material: Polycarbonate (IP65)
- Measurement section material: Stainless steel 1.4301

Not included in delivery:
- Wall power supply
- Portable hand-held measurement unit with mobile data logger

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 1200, G 3/8, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

80 W/K, 230V Ac Weight:24

Pressure regulator DRV 225, High pressure design, non-reversible, incl. pressure gauge, G 1 1/2, Control range 1.5 - 20 bar
Diaphragm pressure regulators with non-self-relieving design and non-pressure-reduced single-seated valve. Very precise adjustment and good response characteristic because there are only a few moving parts and hence
minimal friction.
Ideal for compressed air, nitrogen and other neutral, non-flammable gases, but only suitable for liquids with comparatively low flow rates.

RCI444R FS11 4 1024 23A1
General Applications
Also referred to as RAC 13

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 1000, G 3/8, Working pressure 1 - 8 bar, Temp. -10°C to 80°C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Differential pressure flow meter »FUTURA«, Size 2, Measurement range 150 - 2000 L/min, Operating pressure 0 - 16 bar
Differential pressure measuring system for detecting changes in flow rate or consumption and measuring energy efficiency. There is a differential pressure at the sensor as soon as a fluid starts to flow. Fast and accurate measurements can be achieved in this way. This robust instrument in a modern design offers a high level of safety (codable) and requires no maintenance.

Accessories:
Wall bracket or alternative a mounting bracket for wall mounting as a component of the
»FUTURA« service unit.
Wall brackets with a connection thread for mounting to an existing compressed air system.
Joiner set for easy adaptation as a component of the »FUTURA« service unit.
Adapter plates for adapting different »FUTURA« service unit sizes.

Differential pressure flow meter »FUTURA«, Size 2, Measurement range 200 - 5000 L/min, Operating pressure 0 - 16 bar
Differential pressure measuring system for detecting changes in flow rate or consumption and measuring energy efficiency. There is a differential pressure at the sensor as soon as a fluid starts to flow. Fast and accurate measurements can be achieved in this way. This robust instrument in a modern design offers a high level of safety (codable) and requires no maintenance.

Accessories:
Wall bracket or alternative a mounting bracket for wall mounting as a component of the
»FUTURA« service unit.
Wall brackets with a connection thread for mounting to an existing compressed air system.
Joiner set for easy adaptation as a component of the »FUTURA« service unit.
Adapter plates for adapting different »FUTURA« service unit sizes.

Stainless steel filter, 1.4401, 25 µm, Size 4, G1, Input pressure max. 30 bar, Medium temperature max. 80 °C
Stainless steel filters for use in the chemical industry, mining, plant construction and
special machinery industries, pneumatics, etc.

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 900, G 3/8, Working pressure 1 - 8 bar, Temp. -10 °C to 80 °C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Female hinge model with bushes, ISO 15552, Ø320, 4 screws, 1 bolt and retainer

Angle flange, ISO 15552, ISO 21287, Ø32, 1 piece with 4 screws

DC Tachogenerators are used as speed monitoring devices, they convert rotating movement (RPM) into a proportional DC voltage with almost nil propagation delay and have no need for an energy supply.
They are most often used when mounted on to the back of a DC Motor and supply the connected DC drive with a voltage that is linear to speed typically expressed as a voltage against speed e.g. 40V/1000RPM.
Part Number /0000048

Heavy Industrial Applications Slow Speed Use
Also referred to as REO588MF, REO 588MF, RE0588MF, RE0 588MF

Railway or Severe Industrial Applications
Also referred to as REO588SR, REO 588SR, RE0588SR, RE0 588SR

Industrial Applications for GB
Also referred to as REO588GB, REO 588GB, RE0588GB, RE0 588GB

RE 0444 US 1CB 0 02 CA
Industrial Applications Imperial Dimensions for USA. UL Approved
Also referred to as REO444US, REO 444US, RE0444US, RE0 444US

RE.0444 US 1CB 0.1 CA
Industrial Applications Imperial Dimensions for USA. UL Approved
Also referred to as REO444US, REO 444US, RE0444US, RE0 444US

REO444US B C1 x20 CA IP54 Dx19 PC
Industrial Applications Imperial Dimensions for USA. UL Approved
Also referred to as REO444US, REO 444US, RE0444US, RE0 444US

Industrial Applications Slow Speed Use
Aso referred to as REO588, REO 588, RE0588, RE0 588

3-way stainless steel ball valve, Pneumat. actuation drive, T-hole T1, Operating temp. -20°C to 70°C, Rp 2, DN 50, PN max. 63 bar
3-way cock, reduced bore.
Pneumatic actuators, double- or single acting version and integrated end-position feedback.

Standardised interfaces:
Actuator/valve interface: Four or eight female threads in the actuator housing acc. to EN ISO 5211.
Actuator/control valve interface: Acc. to NAMUR or VDI/VDE 3845.
Actuator/signalling device interface: Acc. to VDI/VDE 3845 (NAMUR).

Piston rod-free cylinder, double-acting, Magnet, Piston Ø 63, Stroke 800, G 3/8, Working pressure 1 - 8 bar, Temp. -10 °C to 80 °C
These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.
Suitable for filtered (50 µm), unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Color Ral 7035 Weight:15