Maedler 68580860

67.39 67.39 USD


Add to Cart

Rubber-metal MGS diameter 100mm height 60mm thread M16x42
Material: Metal parts: Steel, zinc-plated. Elastomer: Natural
rubber, hardness 55° Shore.

Metal on one side only. Metal bumpers can be used to limit bearing
surfaces e.g. for elastically mounted power units, and as bump stop to
limit the spring travel in vehicles. They can also be used for machines
that cannot be fixed to the floor or are standing on floors with an
easily damaged surface, e.g. office machines. * Fperm. is the
permissible static permanent load, which may be overlaid by a dynamic,
alternating load. With shearing load please take care that no tension
load in the rubber occurs at all during mounting. To achieve a
sufficient fatigue strength provide some compressive pre-stressing. The
stated permissible loads are only approximate, guideline values for the
static load for "medium" rubber hardness. With particularly high,
dynamic, alternating loads or high frequencies, the load figures have to
be reduced accordingly. Temperature resistant up to 80°C.

Article ID: 68580860

D [mm] 100
H [mm] 60
G [mm] M16
I [mm] 42
Spring Rate CD average [N/mm] 800
Admissible Load F zul.* [N] 4200
Weight [g] 709

Click below to download the product-related documents