2/2-way solenoid valve »2KW«, Brass, NO, directly operated, 230 V, 50 Hz, Medium temp. max. 80 °C / 90 °C, G 3/8, PN 0 - 20 bar
Standard series available in two different versions:

-Directly operated
-Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Connector socket, form A acc. to ISO 4400, for all valves with a G 3/8 or G 1/2 thread except valve types 3 and 4.
Special connector socket (similar to form B) for all valves with a G 1/8 or G 1/4 thread except valve types 3 and 4.

Medium temperature max. 80 °C when used with water or oils, max. 90 °C when used with air.

Replacement sieve, for pressure regulator for potable water, R 1 1/2 and R 2

Compact cylinder »ACP«, double-acting, Piston Ø 100, Stroke 55, Connection G 1/4, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Screw-on hose connector, G 1/8 i., for hose I.D. 8, Stainless steel, Max. working pressure 60 bar, Max. operating temp. 150 °C

Pressure regulator »GA«, Pressure gauge, Mounting bracket, Size 600, G 3/4, Input pressure max. 10 bar, Control range 0.5 - 9 bar
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure setting can be locked by pushing the button down.

Quick-connect coupling I.D. 2.7, bright brass, Hose connection 6x4, Operating pressure 0-35 bar, Med./ambient temp. -20°C to 100°C
One-hand quick disconnect couplings, one side sealing, extremely compact with a large bore and only a small pressure drop.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, automotive.

Push-in T-fitting »Blue Series« mini, L-shape, rotating, M3, for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Reducer, Pipe exterior Ø Female connector 18/12 mm, PN max. 315 bar, a/f1 19, a/f2 22, a/f3 32, galvanised steel
Reducer, light type

Straight screw-in fitting, Soft sealing, G 1/8 o., Pipe exterior Ø 6 mm, PN max. 315 bar, AF1 14, AF2 14, galvanised steel
Male connector, parallel male thread and soft seal, light type

Ferrite 540 N
POT VLAK GAT 80X18
SKU: GM16606
Stock: 0
Diameter (D): 80 mm
Height: 18 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

Flat knurled nut DIN 467 M8
Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN.
Article ID: 65374800

Ball flange bearing SSUCF 209 bore 45mm housing and bearing stainless steel
Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple.
Article ID: 62699045

Hexagonal trapezoidal nut steel C35Pb Tr.52 x 8 single-start left length 78mm wrench size 75mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.

Article ID: 64365200

Articulated male hinge model, ISO 15552, Ø160, with 4 screws

Hose coupling set, PUR, I.D. 7.6, Medium / ambient temperature -20 °C to 60 °C, Hose Ø 16x11, PN max. 16 bar, Length 10 m
Spiral or straight polyurethane hose, completely assembled with DN 7.6 safety coupling and steel plugs.

Coupling
Safety coupling made of steel / nickel-plated brass for high flow rates, specially designed for all applications susceptible to severe mechanical wear.
Strong, impact and vibration-resistant design for demanding environments.

Polyurethane hose
Extremely flexible spiral hose with excellent kink resistance and insensitive to dirt.
Combines high tear, tensile and impact strength with a long service life and optimal ageing qualities.
This hose is additionally characterised by outstanding resistance to abrasion and resistance to UV.

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Hood with on / off switch

Round cylinder »MSI«, single-acting, Magnet, Piston Ø 12, Stroke 15, M5x0.8, Working pressure 2 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Replacement sieve, for pressure regulator for potable water, R 1 and R 1 1/4

Double threaded nipple, Cyl., G 1 o., G 1 o., AF 38, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Push-in T-fitting »Blue Series« mini, L-shape, rotating, M5, for hose exterior Ø 3 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Bushing, Exterior hexagonal, reducing, G 1/2, G 3/8, Stainless steel, Max. working pressure 60 bar, Max. operating temp. 150 °C

Water hose, Soft PVC, Polyester fibre insert, Temperature max. 60 °C, Hose Ø 31.5x25, PN at 23 °C max. 8 bar, Roll of 25 m
Five-layer, soft PVC water hose with knitted polyester reinforcement. This multi-layer hose with knitted fabric reinforcement is extremely flexible and easy to use, offering excellent bending strength as well as high resistance to kinking and UV.

Ferrite 600 N
GM16608
SKU: GM16608
Stock: 0
Diameter (D): 83 mm
Height: 18 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

Plug pin outer diameter 10mm
Material: Plastic acetal resin.

Article ID: 86111000

V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 280mm
Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement.

Article ID: 15032800

Round trapezoidal nut steel Tr.40x14 P7 double-thread right length 60mm outer diameter 80mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.

Article ID: 64564000

Needle valve, Stainless steel 1.4571, Operating temperature -20 °C to 120 °C, G 1/4, DN 5, PN max. 400 bar

Pressure regulator for potable water, DVGW not necessary, incl. pressure gauge, Brass sieve cup, R 1, Control range 0.5 - 2 bar
Diaphragm pressure regulators with pressure-reduced single-seated valve and built-in strainer.
These pressure regulators, which are independent of inlet pressure, protect domestic water installations against
excessive supply pressure. They can also be used for commercial or industrial purposes providing their
specification is adequate.

Proportional control valve »posiflow«, for air / gas, 24 V DC, NC, G 1/4, DN 2.4, Operating pressure difference max. 8 bar
For electronic flow control.

For all applications where the flow rate of a liquid or gas has to be controlled.
The valve features a special magnet armature and is characterised by low friction and a high dynamic response.

If the valve is combined with a plug amplifier:
The maximum / minimum current and frequency can be adjusted by means of integrated potentiometers.
A current ramp can also be connected and adjusted with a potentiometer.
This facilitates a slow change in the flow rate, even if the setpoint changes suddenly.
If the setpoint is < 200 mV (< 0.4 / 4.4 mA), the piloting current is completely switched off, causing the valve to be de-energised (tightly closed function).

We recommend combining these proportional valves with a plug amplifier.

Benefits:
- Compact and economical
- Integrated temperature compensation
- Precise control
- Optimised flow with no water hammer
- Ramp function assures a smooth response to step changes in the input signal
- Disconnect function

Drip cap metal

Round cylinder »MSI«, single-acting, Magnet, Piston Ø 12, Stroke 20, M5x0.8, Working pressure 2 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

T-fitting, Pipe exterior Ø 8 mm, AF 11, AF1 14, Operating pressure max. 60 bar, Temperature max 150 °C, nickel-plated brass

Push-in T-fitting »Blue Series« mini, L-shape, rotating, M5, for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Push-in T-fitting »metallica«, rotating, G 3/8 o., for hose exterior Ø 12 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Bracket 90°, red. IT/IT Rp 3/4, Rp 1/2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, ISO 7-1
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Ferrite 680 N
POT MAGNET FERRIET 100x22
SKU: GM16609
Stock: 0
Diameter (D): 100 mm
Height: 22 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

Mounting device module 5 19°31'42" left handed for gear racks 255603xx 255605xx and 255609xx
Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting.

Article ID: 25560000

Rod end GAW DIN 12240-4 series E external thread M39x3 right maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds.
Article ID: 63464000

Angled piece, 90°, interior / interior, G 2, Operating pressure max. 10 bar, Operating temperature max. 90 °C, Bright brass

Proportional control valve »posiflow«, for air / gas, 24 V DC, NC, G 1/4, DN 3.2, Operating pressure difference max. 4 bar
For electronic flow control.

For all applications where the flow rate of a liquid or gas has to be controlled.
The valve features a special magnet armature and is characterised by low friction and a high dynamic response.

If the valve is combined with a plug amplifier:
The maximum / minimum current and frequency can be adjusted by means of integrated potentiometers.
A current ramp can also be connected and adjusted with a potentiometer.
This facilitates a slow change in the flow rate, even if the setpoint changes suddenly.
If the setpoint is < 200 mV (< 0.4 / 4.4 mA), the piloting current is completely switched off, causing the valve to be de-energised (tightly closed function).

We recommend combining these proportional valves with a plug amplifier.

Benefits:
- Compact and economical
- Integrated temperature compensation
- Precise control
- Optimised flow with no water hammer
- Ramp function assures a smooth response to step changes in the input signal
- Disconnect function

Capsule pressure gauge, Housing steel, Connection, rear, centric, G 1/4, Goods class 1.6, Measurement range 0 - 60 mbar, Ø 63
With zero correction.

Round cylinder »MSI« single-acting, Magnet, Piston Ø 12, Stroke 25, M5x0.8, Working pressure 2 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

Transparent sieve cup, for pressure regulator for potable water, R 1/2 and R 3/4

Push-in L-connector »metallica«, for hose exterior Ø 12 mm, Working pressure max. 16 bar, Operating temperature -20 °C to 150 °C
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Push-in T-fitting »Blue Series« mini, L-shape, rotating, M5, for hose exterior Ø 6 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Double threaded nipple, reducing, Hexagonal, R 1 1/4, R 1, AF 44, Working pressure max. 20 bar, Stainless steel 1.4408

Reducing nipple, long type, G 1/4 o., G 1/4 i., AF 17, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Retaining ring DIN 471 47mm
Material: Feather steel, phosphated, oiled. External rings for
axial fixing a machine part on a shaft.

Article ID: 61744700

Ferrite 170 N
KER POT DR GAT 50X10 M6
SKU: GM16654
Stock: 0
Size: Ø50 mm
Thread (M): M6
Compact magnet systems with a steel shell and thread for easy installation in places with low installation height. There is no force on the pot magnet for assembly. Due to the shell of these magnetic systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion and chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.

High torque screwable
Unlimited applications and moveable
Available in various sizes

Construction of ferrite pot magnets

Good magnetic properties, affordably priced

Ferrite pot magnets, also referred to as ceramic pot magnets, are fitted with a steel pot that provides shielding of the magnetic field. Ferrite pot magnets require only a minimal installation height. This provides constructive advantages.

Operating temperature

When does loss of magnetic strength occur?

Ferrite pot magnets have an operating temperature of up to 200 °C. When heated to this temperature, the magnet loses 30 to 40% of its magnetic force. This is not permanent; the force is restored when the magnet temperature returns to the normal ambient temperature. The magnet force of these pot magnets is lower than that of neodymium pot magnets.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Corrosion-resistant

Ferrite pot magnets do not corrode and are suitable for outdoor use.

Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 08 B-2-GL pitch 1/2x5/16" with straight plates
Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.
Article ID: 12500300GL

Ball joint RW bore 40H7 material steel
outer diameter 65mm total length 190mm
Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C.
Article ID: 63136500

Rod end GAW DIN 12240-4 series E external thread M39x3 left maintenance-free
Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN 648 / 12240-4 series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds.
Article ID: 63484000

Standard cylinder, ISO 15552, double-acting, Piston Ø 32, Stroke 80, G 1/8, Working pressure max. 10 bar, Temp. -10 °C to 80 °C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches can be mounted in two T-slots on the same side as the compressed air supply.
The version with a 125 mm bore is provided with fixing accessories on three sides as standard.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Transparent sieve cup, for pressure regulator for potable water 1.5 - 6 bar (construction year 1977-1991), R 1 and R 1 1/4

Proportional control valve »posiflow«, for water / oil, 24 V DC, NC, G 1/4, DN 3.2, Operating pressure difference max. 4 bar
For electronic flow control.

For all applications where the flow rate of a liquid or gas has to be controlled.
The valve features a special magnet armature and is characterised by low friction and a high dynamic response.

If the valve is combined with a plug amplifier:
The maximum / minimum current and frequency can be adjusted by means of integrated potentiometers.
A current ramp can also be connected and adjusted with a potentiometer.
This facilitates a slow change in the flow rate, even if the setpoint changes suddenly.
If the setpoint is < 200 mV (< 0.4 / 4.4 mA), the piloting current is completely switched off, causing the valve to be de-energised (tightly closed function).

We recommend combining these proportional valves with a plug amplifier.

Benefits:
- Compact and economical
- Integrated temperature compensation
- Precise control
- Optimised flow with no water hammer
- Ramp function assures a smooth response to step changes in the input signal
- Disconnect function

Kamlok quick-connect plug with interior thread, A type, Stainless steel 1.4401, G 1 1/2, Plug Ø 53 mm, Pressure max. 16 bar
High-quality, robust, universal coupling system with a safety clamp for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok stainless steel couplings are designed for use with corrosive media in the chemical and petrochemical industries, steelmaking, shipbuilding, agriculture, etc.

All female threaded couplings and connectors are with female thread sealing ring made of PTFE.

GEKA threaded piece, rigid, Stainless steel, G 1 1/4 interior, Operating pressure max. 40 bar, Med./ambient temp. -10 °C to 150 °C
Claw couplings (claw distance: 40 mm) made of stainless steel (similar to 1.4581).
Suitable for a wide range of applications, e.g. in the chemical, food processing, water management,
vehicle construction, shipbuilding and aerospace industries, agriculture, environmental engineering, etc.
The stainless steel series can be easily coupled to the standard brass series!

Reducing fitting, Sealing cone, Nut M16x1.5 i., Pipe exterior Ø1 10 mm, Pipe exterior Ø2 6 mm, PN max. 315 bar, galvanised steel
Reducer, with cone seal, light type

Push-in T-fitting »Blue Series« mini, L-shape, rotating, M6, for hose exterior Ø 3 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Double threaded nipple, Hexagonal, R 1 1/4, AF 44, Working pressure max. 20 bar, Stainless steel 1.4408