Push-in T-fitting »Blue Series« mini, rotating, M5, for hose exterior Ø 6 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Bidirectional flow control valve »lineonline«, Flow both sides, Hose - hose, for hose Ø 6 mm, Operating pressure max. 10 bar
Control the air intake and thus the speed of pneumatic units.

Straight screw-in fitting, ET conical, R 1/8, for hose 4/2 mm, AF 10, Working pressure max. 18 bar, nickel-plated brass

Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 4mm outer diameter 8mm flange diameter 12mm length 4mm
Self lubricating, oil coated, pressed ready-to-install and 1)
kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The
concentricity tolerance refers to d2. 1) no statement regarding the
surface roughness according to DIN 3141 (prenorm) can be given due to
the porous structure of the sintered metal. Technical Data: Surface
pressure: max. 35 N/mm², depending on speed and diameter. Temperature
range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores
9 - 22 mm = 0.6 mm, bores 25 - 40 mm = 0.8 mm Tolerances: Inner
diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13.
Length b1:+/-0.1mm.Flange thickness b2: js14.

Article ID: 62350400

Neodymium (NdFeB) 330 N
PM-TI-N-SG-D32x7xM5
SKU: GM17438
Stock: 212
Diameter (D): 32 mm
Height: 7 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

timing bar AT5 60 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16696000

Triple-strand sprocket DRT 10 B-3 5/8x3/8" 23 teeth material steel for taper bush type 2012
Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)
Article ID: 13677123

Valve replacement set, for pressure regulator for potable water, R 1

Push-in T-fitting, L-shape, rotating, R 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Pre-filter »FUTURA« with PC container and protective cage, 0.3 µm, Size 2, G 3/8, 1.5-16 bar, Temp. -10°C to 50°C, Fully-automatic
Pre-filters in modern design for compliance with strict compressed air purity requirements.
Pre-filters are used to separate solid impurities up to 0.3 µm from compressed air and gases.

Distributor with 2 quick-connect couplings I.D. 7.2, Bright brass, with plug nipple I.D. 7.2 - 7.8, G 3/8, Operating pre. 0-35 bar
1, 2 or 3-way distributor pieces made of brass with a bare metal surface, pre-assembled with quick disconnect coupling DN 7.2.
Available with threaded connection inside or outside or nipple for adaptation into an existing quick disconnect coupling DN 7.2 to DN 7.8.

Compact cyl.ISO 21287, single-acting, male piston rod ext.,magnet,PistonØ32,Stroke5,G1/8, Work.press.max.10bar, Temp.-20°C to 70°C
Series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Quick-connect coupling I.D. 2.7, bright brass, Hose connection 5x3, Operating pressure 0-35 bar, Med./ambient temp. -20°C to 100°C
One-hand quick disconnect couplings, one side sealing, extremely compact with a large bore and only a small pressure drop.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, automotive.

Push-in T-fitting »Blue Series« mini, rotating, M6, for hose exterior Ø 3 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Throttle check valve »ASC«, in block shape, Aluminium, Operating temperature max. 70 °C, G 1/4, PN max. 10 bar
These valves are restricted in the flow direction and have free passage in the opposite direction.

Straight push-in fitting »click-clock«, R 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 6mm outer diameter 10mm flange diameter 14mm length 16mm
Self lubricating, oil coated, pressed ready-to-install and 1)
kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The
concentricity tolerance refers to d2. 1) no statement regarding the
surface roughness according to DIN 3141 (prenorm) can be given due to
the porous structure of the sintered metal. Technical Data: Surface
pressure: max. 35 N/mm², depending on speed and diameter. Temperature
range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores
9 - 22 mm = 0.6 mm, bores 25 - 40 mm = 0.8 mm Tolerances: Inner
diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13.
Length b1:+/-0.1mm.Flange thickness b2: js14.

Article ID: 62351000

Neodymium (NdFeB) 1100 N
PM-TI-N-SG-D63x14xM10
SKU: GM17442
Stock: 0
Diameter (D): 63 mm
Height: 14 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

2/2-way solenoid valve »2KW«, Brass, NO, directly operated, 24 V DC, Medium temperature max. 80 °C / 90 °C, G 1/2, PN 0 - 20 bar
Standard series available in two different versions:

-Directly operated
-Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Connector socket, form A acc. to ISO 4400, for all valves with a G 3/8 or G 1/2 thread except valve types 3 and 4.
Special connector socket (similar to form B) for all valves with a G 1/8 or G 1/4 thread except valve types 3 and 4.

Medium temperature max. 80 °C when used with water or oils, max. 90 °C when used with air.

Pressure regulator for potable water, DVGW not necessary, incl. pressure gauge, Brass sieve cup, R 3/4, Control range 0.5 - 2 bar
Diaphragm pressure regulators with pressure-reduced single-seated valve and built-in strainer.
These pressure regulators, which are independent of inlet pressure, protect domestic water installations against
excessive supply pressure. They can also be used for commercial or industrial purposes providing their
specification is adequate.

Pre-filter »FUTURA« with PC container and protective cage, 0.3 µm, Size 2, G 1/2, 1.5-16 bar, Temp. -10°C to 50°C, Fully-automatic
Pre-filters in modern design for compliance with strict compressed air purity requirements.
Pre-filters are used to separate solid impurities up to 0.3 µm from compressed air and gases.

Throttle check valve »ASC«, in block shape, Aluminium, Operating temperature max. 70 °C, G 3/8, PN max. 10 bar
These valves are restricted in the flow direction and have free passage in the opposite direction.

T-fitting, Pipe exterior Ø 8 mm, PN max. 315 bar, Stainless steel 1.4571

Push-in L-fitting »Blue Series«, Self-locking, G 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

Push-in T-fitting »Blue Series« mini, rotating, M6, for hose exterior Ø 4 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Foot fastening, ISO 15552, for compact cylinder, Standard cylinder, Piston Ø 63, 1 piece with 2 screws
Foot model

Plug nipple »Blue Series«, plug nipple 8 mm, Working pressure max. 15 bar, Plastic
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Sprocket KRR with hub 08 B-1 1/2x5/16" 32 teeth material stainless steel 1.4305
Material: Stainless steel 1.4305.

Teeth milled, pre-bored.

General dimensions:
B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.


Article ID: 10599132

Ready-to-install flange nut Tr.60 x 9 single-start right material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H.
Article ID: 64477060

Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 8mm outer diameter 12mm length 8mm
Self lubricating, oil coated, pressed ready-to-install and 1)
kalibrated. After press-fitting them into a rigid bearing housing with a
mounting hole H7, these bearings have a bore of H7. Edges chamfered at
45°, at choice of the manufacturer. The concentricity tolerance refers
to d2. 1) no statement regarding the surface roughness according to DIN
3141 (prenorm) can be given due to the porous structure of the sintered
metal. Technical Data: Surface pressure: max. 35 N/mm², depending
on speed and diameter. Temperature range: -20°C to +120°C.Tolerances:
Inner diameter F7 / G7. Outer diameter s7. Length +/-0.1mm.

Article ID: 62331700

Neodymium (NdFeB) 1750 N
PM-TI-N-SG-D74.6x15xM10
SKU: GM17445
Stock: 0
Diameter (D): 74.6 mm
Height: 15 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

Ready-to-install flange nut Tr.60 x 9 single-start left material cast iron
Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H.
Article ID: 64477360

2/2-way solenoid valve »2KW«, Brass, NO, directly operated, 230 V, 50 Hz, Medium temp. max. 80 °C / 90 °C, G 1/2, PN 0 - 20 bar
Standard series available in two different versions:

-Directly operated
-Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Connector socket, form A acc. to ISO 4400, for all valves with a G 3/8 or G 1/2 thread except valve types 3 and 4.
Special connector socket (similar to form B) for all valves with a G 1/8 or G 1/4 thread except valve types 3 and 4.

Medium temperature max. 80 °C when used with water or oils, max. 90 °C when used with air.

PVC special pneumatic hose, Temperature -10 °C to 60 °C, Hose Ø 10.2x8, PN at 20 °C max. 35 bar, Roll of 50 m, blue
Flexible, high-quality, PVC hose with a smooth inner layer and braiding made of special impregnated fabric, suitable for high pressures. Largely resistant to salt solutions, diluted acids and alkaline solutions, greases and mineral oils.

Cross-piece, 4x interior thread, G 3/8, Operating pressure max. 10 bar, Operating temperature max. 90 °C, Bright brass

Pressure regulator »GA«, Pressure gauge, Mounting bracket, Size 400, G 3/8, Input pressure max. 10 bar, Control range 0.5 - 9 bar
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure setting can be locked by pushing the button down.

Push-in L-fitting »Blue Series«, Self-locking, G 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

Push-in T-fitting »Blue Series« mini, rotating, M6, for hose exterior Ø 6 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Reducing nipple, short, G 1/8 o., M5 i., AF 14, Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Replacement sieve, for pressure regulator for potable water, R 1/2 and R 3/4

Straight screw-in fitting, »value line«, G 3/8 o., for hose 6/4 mm, AF 19, Operating pressure max. 18 bar, nickel-plated brass
Straight connectors
Nickel-plated brass, »value line« Series

Round trapezoidal nut stainless 1.4305 Tr.40 x 7 single-start right length 60mm outer diameter 80mm
Material: 1.4305.

Tolerance zone 7H. Height = 1,5 x diameter.
Attention: Steel nuts get very easily thightened on a spindle
made from Steel or stainless steel. This nuts are only for clamping,
manual adjustments or as fastening nut. Not suitable for drive systems.

Article ID: 64399040

Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 left with nut steel zinc-plated
Material: Steel zinc-plated. With threaded bolt and hexagon nut,
ball stud hardened.
Form C: Without circlip.
Form CS: With circlip.
Thread: Gewindeausführung rechts = right handed thread in the
socket. Gewindeausführung links = left handed thread in the socketmarked
with a circumferential groove.

* Pivoting angle reduced by circlip.

Article ID: 63670500

Ferrite 180 N
PM-HB-F-SG-D50x10xd8,5/22
SKU: GM16604
Stock: 20
Diameter (D): 50 mm
Height: 10 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

Slide rail DZ 9308 single rail left hand slide length 610mm zinc plated
Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings.

Article ID: 64905224

Round trapezoidal nut stainless 1.4305 Tr.40 x 7 single-start left length 60mm outer diameter 80mm
Material: 1.4305. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.
Article ID: 64399540

2/2-way solenoid valve »2KW«, Brass, NO, directly operated, 24 V DC, Medium temperature max. 80 °C / 90 °C, G 3/8, PN 0 - 20 bar
Standard series available in two different versions:

-Directly operated
-Pilot-operated

For all applications with compressed air, neutral gases or low-viscosity, neutral media.

Connector socket, form A acc. to ISO 4400, for all valves with a G 3/8 or G 1/2 thread except valve types 3 and 4.
Special connector socket (similar to form B) for all valves with a G 1/8 or G 1/4 thread except valve types 3 and 4.

Medium temperature max. 80 °C when used with water or oils, max. 90 °C when used with air.

Hose rupture valve »Hose Guard« Aluminium, Aluminium piston, Temp. -20 °C to 120 °C, G 1 IT/IT, Input pressure max. 18 bar
Efficient protection for ruptured hoses or pipes in pneumatic systems. Preset to permit normal air consumption by pneumatic tools.
Hose Guard detects a rupture in a hose or pipe and interrupts the supply of compressed air in a fraction of a second apart from a minimal residual flow. Unaffected parts of the compressed air system remain fully pressurised, so that the damaged hose or segment can be replaced without difficulty. Once the ruptured hose or pipe has been repaired, the replaced segment gradually fills to its working pressure level. As soon as this occurs, Hose Guard opens the line again for normal operation.

Installation: Upstream of a coupling (connector between hard piping and junction box/coupling) and downstream of a service unit.

»Hose Guard«
- Protects personnel, machinery and plant against damage if a pneumatic system or hose ruptures
- Complies with the EU standard DIN EN ISO 4414: 2010, 2011-04 - § 5.4.5.11
- Is reliable and tamper-proof
- Can be installed in any pneumatic system

Replacement sieve for dirt strainers made of brass, for connection size G 4, mesh width 0.8 mm, DN 100

Pressure regulator »GA«, Pressure gauge, Mounting bracket, Size 400, G 1/2, Input pressure max. 10 bar, Control range 0.5 - 9 bar
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design. The pressure setting can be locked by pushing the button down.

Replacement sieve, for pressure regulator for potable water, R 1 and R 1 1/4

Quick-connect coupling I.D. 2.7, bright brass, Hose connection 4x3, Operating pressure 0-35 bar, Med./ambient temp. -20°C to 100°C
One-hand quick disconnect couplings, one side sealing, extremely compact with a large bore and only a small pressure drop.
To prevent injuries or a "whiplash" effect, we recommend that the plug-in nipple is held with one hand during uncoupling.

Areas of application: Pneumatic system, machine and plant engineering, measurement, monitoring and control systems, manufacturing industry, medical technology, chemical / pharmaceutical industry, automotive.

Push-in T-fitting »Blue Series« mini, L-shape, rotating, M3, for hose exterior Ø 3 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Reducer, Pipe exterior Ø Female connector 18/6 mm, PN max. 315 bar, a/f1 19, a/f2 14, a/f3 32, galvanised steel
Reducer, light type

Push-in L-connector, Plug nipple 16 mm »Blue Series«, for hose exterior Ø 16 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Rubber pad for collars type B1 with bore 25mm
Material: Rubber NBR, black, 70º +/-5º Shore A.

These oil-resistant rubber pads can be cliped into the axial bores of
the Maedler® shaft collars type B1. The rubber pads enable a careful and
vibration-damping clamping of a machine component on a shaft. For
mounting, the pins should be lubricated with oil or grease. At collars
from stainless steel, tire mounting paste or alternatively hand
dishwashing detergent can also be used.

Article ID: 62312599

Ferrite 290 N
PM-HB-F-SG-D63x14xd6.5/24
SKU: GM16605
Stock: 0
Diameter (D): 63 mm
Height: 14 mm
Material housing: Galvanized steel
Compact magnet systems with a steel shell and a cylinder hole for easy mounting. These pot magnets are screwable at a high torque while the magnet remains unloaded. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.Pot magnets with cylinder hole are available in various sizes and grades such as neodymium and ferrite.

Deliverable from stock
Available in various qualities
Available with extra strong magnet
High torque screwable

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron (NdFeB), which Goudsmit markets under the brand name Neoflux®. The shell - or pot - provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion. The cylinder hole makes the magnet system screwable with a high torque.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical and flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.
 

Important to know

Screwable at a high torque

These pot magnets with cylinder hole are suitable for extra tightening. There is no force on the pot magnet itself. This is not a part of the screw connection. Mounting is easy with a cylinder head bolt.

Clevis DIN 71752 size 8 x 16 left handed steel zinc-plated
Material: Steel zinc-plated. Design G: without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevis with ES-bolt can be used as clevis joint. * Size 20 is not part of the DIN.
Article ID: 63730700

Slide rail DZ 9308 single rail right hand slide length 610mm zinc plated
Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings.

Article ID: 64905424

Hexagonal trapezoidal nut steel C35Pb Tr.50 x 8 single-start left length 75mm wrench size 75mm
Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems.

Article ID: 64365000