Pressure gauge, 0 - 25 bar/350 psi, 80 mm Ø, for plugging, for handheld digital tyre gauge

Bushing - blocking valve, Stainless steel 1.4401/1.4408, Medium / ambient temperature max. 160 °C, G 1 1/2, DN 40, PN max. 14 bar

Female hinge model for articulated male hinge model, ISO 15552, ISO 21287, Ø63, 4 screws, 1 bolt and retainer
Female hinge model

Pressure regulator »FUTURA-mini«, incl. standard pressure gauge, Size 0, G 1/4, Input pressure max. 12 bar, 0.5 - 10 bar
Diaphragm pressure regulators with self-relieving design and with excellent flow rates in modern design.
The regulator knob can be latched.

Pressure regulator for potable water, without DVGW, pressure gauge, R 3/4, Control range 1.5 - 12 bar, Input pressure max. 25 bar
Pressure regulator with pressure-reduced single-seated piston valve or single-seated diaphragm valve and built-in strainer. Specially designed for use with water.
The device is also suitable for all other applications involving neutral non-sticky liquids, air and neutral non-flammable gases.

Push-in T-connector »Blue Series«, reducing, for hose exterior Ø 2x12/1x16 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight screw-in fitting, M18x1,5 o., Pipe exterior Ø 12 mm, PN max. 630 bar, A/F1 24, A/F2 24, galvanised steel, soft seal
Male connector, metric thread and soft seal, heavy type

T-distributor, 3 x interior, Rp 1, Operating pressure max. 20 bar, Operating temp. max. 175 °C, Stainless steel 1.4408

Strainer for check valves, G 3/8, Filter Stainless steel 1.4301, Plastic thread, Operating temperature -20 °C to 100 °C

Rubber-Metal fastening element Maed-Flex material Chloroprene CR 75 +/-5°ShA d2=16mm thread M8
Material: Elastomer: Chloroprene (CR), hardness 75+/-5º Shore A. Metal part (nut): Steel, zinc-plated.Standard components for elastic mounting.The grade of rubber used has perfect physical properties.Quick and easy to mount.Reduces noise and vibrations.Versatile usage with various mounting possibilities.Temperature range: -40°C up to +80ºC.Other sizes, Shore hardnesses or elastomer types on request.
Article ID: 68551008

50 mm Ferrite
PM-BA-FE-SG-D50x10-B
SKU: GM16408
Stock: 100
Holding force: 220 N
Height: 10 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

timing bar AT10 30 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16893000

Precision single universal joint WE DIN808 simple bore 30H7 material steel total length 122mm outer diameter 58mm
Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63125800

Pressure gauge Ø 40 mm, G 1/8 on rear side, Measurement range 0 - 2.5 bar, Goods class 2.5, Stainless steel 1.4571

Pre-filter »FUTURA« with PC container and protective cage, 0.3 µm, Size 4, G 3/4, 1.5-16 bar, Temp. -10°C to 50°C, Semi-automatic
Pre-filters in modern design for compliance with strict compressed air purity requirements.
Pre-filters are used to separate solid impurities up to 0.3 µm from compressed air and gases.

Pressure regulator for potable water, without DVGW, pressure gauge, R 1, Control range 1.5 - 12 bar, Input pressure max. 25 bar
Pressure regulator with pressure-reduced single-seated piston valve or single-seated diaphragm valve and built-in strainer. Specially designed for use with water.
The device is also suitable for all other applications involving neutral non-sticky liquids, air and neutral non-flammable gases.

Bracket 94, 90°, ET/ET, R 2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Captive seal ring made of PA6, Temperature max. 70 °C, for thread G 1/2, PU 100 pcs.

Double threaded nipple, G 3/4 o., G 1 o., AF 38, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Push-in T-fitting »Blue Series«, L-shape, rotating, G 1/8 o., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in T-fitting »click-clock«, rotating, G 1/8 o., for hose exterior Ø 5 mm, Working pressure max. 16 bar, nickel-plated brass
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Straight push-in connector, Plug nipple reducing 6 mm, »click-clock«, for hose exterior Ø 5 mm, Working pressure max. 16 bar
The advanced version of our highly successful push-in fittings series manufactured in nickel-plated brass.

Advantages of this new, optimised series:
Much easier connection and disconnection of the hose, even with repeated mountingCan also be used for non-calibrated hosesSuitable for vacuum operation

Inner chain link type 4 / B stainless steel for roller chain similar to 08 B pitch 1/2x5/16"
Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301.
Article ID: 10599001

63 mm Ferrite
PM-BA-FE-SG-D63x14-B
SKU: GM16409
Stock: 0
Holding force: 350 N
Height: 14 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 9.5mm black polyacetal
Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required.

Article ID: 60123800

Precision single universal joint WE DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel
Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides.
Article ID: 63125800N

Ball valve, High pressure design, Lightweight series, Steel, Operating temp. -10 °C to 100 °C, M36x2, DN 25, PN max. 420 bar
For liquid and lubricating media.

Available versions:

- For solderless tube fittings acc. to DIN 2353, lightweight series acc. to ISO 8434-1.
- For solderless tube fittings acc. to DIN 2353, heavy-duty series acc. to ISO 8434-1.
- With female pipe thread acc. to DIN ISO 228-1 (BSP).

Pressure regulator for potable water, without DVGW, pressure gauge, R 1 1/4, Control range 1.5-12 bar, Input pressure max. 25 bar
Pressure regulator with pressure-reduced single-seated piston valve or single-seated diaphragm valve and built-in strainer. Specially designed for use with water.
The device is also suitable for all other applications involving neutral non-sticky liquids, air and neutral non-flammable gases.

Pre-filter »FUTURA« with PC container and protective cage, 0.3 µm, Size 4, G 1, 1.5 - 16 bar, Temp. -10°C to 50°C, Semi-automatic
Pre-filters in modern design for compliance with strict compressed air purity requirements.
Pre-filters are used to separate solid impurities up to 0.3 µm from compressed air and gases.

Trunnion mounting, CETOP, Ø63, with 4 screws
Male hinge model, CETOP, with 4 screws

Double threaded nipple, G 2 1/2 o., G 1 2/2 o., nickel-plated brass
Previous design. Can be delivered as long as in stock.
After sale the delivery is made in new optimised geometry.

Suitable for air, water, oil, steam, etc.

Straight screw-in fitting, M22x1,5 o., Pipe exterior Ø 15 mm, PN max. 315 bar, A/F1 27, A/F2 27, galvanised steel, soft seal
Male connector, metric thread and soft seal, light type

Push-in T-fitting »Blue Series«, rotating, G 1/8 o., for hose exterior Ø 6 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Polycarbonate container, incl. NBR O-ring 30x2, with semi-automated bleeder valve, for »multifix-mini« and »Standard-mini«

Double threaded nipple, reducing, Hexagonal, R 1/4, R 1/8, AF 15, Working pressure max. 20 bar, Stainless steel 1.4408

Round trapezoidal nut red brass Rg7 Tr.40 x 7 single-start left length 80mm outer diameter 80mm
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).

Tolerance zone 7H. Height = 2 x diameter.

Article ID: 64384000

80 mm Ferrite
GM16410
SKU: GM16410
Stock: 0
Holding force: 600 N
Height: 18 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

Trapeziodal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start right material 1.4305 rolled
Material: 1.4305. Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken.
Article ID: 64099216

timing bar T5 46 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16294600

Ball valve, High pressure design, Heavy-duty series, Steel, Operating temp. -10 °C to 100 °C, M42x2, DN 25, PN max. 420 bar
For liquid and lubricating media.

Available versions:

- For solderless tube fittings acc. to DIN 2353, lightweight series acc. to ISO 8434-1.
- For solderless tube fittings acc. to DIN 2353, heavy-duty series acc. to ISO 8434-1.
- With female pipe thread acc. to DIN ISO 228-1 (BSP).

Pressure regulator for potable water, without DVGW, pressure gauge, R 1 1/2, Control range 1.5-12 bar, Input pressure max. 25 bar
Pressure regulator with pressure-reduced single-seated piston valve or single-seated diaphragm valve and built-in strainer. Specially designed for use with water.
The device is also suitable for all other applications involving neutral non-sticky liquids, air and neutral non-flammable gases.

Compact cylinder »ACP«, double-acting, Piston Ø 100, Stroke 45, Connection G 1/4, Working pressure 1-10 bar, Temp. -20 °C to 70 °C
Characterised by a very short and compact design.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Reducing nipple, Long, G 1/2 o., G 1/2 i. AF 24 Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Fitting 340, conical sealing, Rp 2 1/2, Rp 2 1/2, black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Straight screw-in fitting, M22x1,5 o., Pipe exterior Ø 22 mm, PN max. 160 bar, A/F1 36, A/F2 32, galvanised steel, soft seal
Male connector, metric thread and soft seal, light type

Push-in L-fitting »Blue Series«, rotating, G 1/8 i./o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in L-fitting »Blue Series« long, rotating, G 3/8 o., for hose exterior Ø 14 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Plug-in connector for couplings I.D. 7.2 - 7.8, bright brass, Sleeve I.D. 8, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Rubber-metal buffer MGI with internal thread on both sides diameter 10mm height 10mm thread M4x4
Material: Elastomer: Natural rubber hardness 55°. Metal parts:
Steel, zinc-plated.

Both sides with internal thread. Standard components for elastic
mounting. The grade of rubber used has perfect physical properties.

Temperature resistant up to 80ºC.

Other sizes, Shore hardnesses or elastomer types on request.

* Fperm. is the permissible static permanent load, which may
be overlaid by a dynamic, alternating load. With shearing load please
take care that no tension load in the rubber occurs at all during
mounting. To achieve a sufficient fatigue strength provide some
compressive prestressing.

Article ID: 68541000

6 mm Samarium-Cobalt (SmCo)
PM-BA-S-SG-D6x4.5
SKU: GM17101
Stock: 23
Holding force: 5 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

Spur gear made of polyketone die-cast with hub module 0.5 55 teeth tooth width 3mm outside diameter 28,5mm
Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load.
Article ID: 28105501

Ready-to install flange nut EFM long Tr.48x8 right hand material red brass
Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103.
Article ID: 64477548

V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 224mm
Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement.

Article ID: 15022200

Short stroke cylinder, double-acting, Magnet, Piston Ø 40, Stroke 25, G 1/8, Working pressure max. 10 bar, Temp. -10 °C to 80 °C
Suitable for installation in limited spaces.
Supplied with magnet.
Suitable for filtered compressed air, lubricated (ensure continuity) or unlubricated.

Pressure regulator for potable water, without DVGW, pressure gauge, R 2, Control range 1.5 - 12 bar, Input pressure max. 25 bar
Pressure regulator with pressure-reduced single-seated piston valve or single-seated diaphragm valve and built-in strainer. Specially designed for use with water.
The device is also suitable for all other applications involving neutral non-sticky liquids, air and neutral non-flammable gases.

Push-in T-fitting, L-shape, rotating, G 1/2 o., for hose exterior Ø 14 mm, Working pressure max. 20 bar, Stainless steel 1.4404
For use in more aggressive environments and corrosive media.

Ball valve »valve line« Hand lever blue, Nickel-plated brass, IT/IT, G 1 1/4, DN 30, Operating temp. -20°C to 120°C, PN max 25 bar
Extremely economical standard ball valves made of nickel-plated brass for compressed air, water, non-toxic and non-corrosive gases and liquids.

Push-in L-connector, for hose exterior Ø 8 mm, Working pressure max. 15 bar, Stainless steel 1.4404
For use with aggressive media and in areas susceptible to corrosive outside
influences, in the food processing industry and in hygienic and sanitary applications.

Nipple for couplings I.D. 10, Hardened / nickel-plated steel, G 3/8 IT, Operating pressure 0 - 35 bar, Temp. -20 °C to 100 °C

Hose clamp, Malleable cast iron, 2-part, with loose tongues, Safety jaws, Clamping range 22 - 29 mm, for hose I.D. 13 (1/2")