2 m 300 mm
NAI0300R0115PA
SKU: NAI0300R0115PA
Stock: 0
Thickness: 1.5 mm
Holding force: 4 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

Two-piece clamp coupling MAT both sides bore 40mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9
Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of nylon. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Article ID: 60084000

Bevel gear made of steel module 2.5 48 teeth i=3:1 milled
Material: up to module 2: 11SMnPb30. From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Article ID: 36118100

Pressure regulator for potable water, DVGW tested, incl. pressure gauge, Transparent sieve cup, R 1/2, Control range 1.5 - 6 bar
Diaphragm pressure regulators with pressure-reduced single-seated valve and built-in strainer.
These pressure regulators, which are independent of inlet pressure, protect domestic water installations against
excessive supply pressure. They can also be used for commercial or industrial purposes providing their
specification is adequate.

Compact cylinder LINER, ISO 21287, double-acting, Piston Ø 50, Stroke 15, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 60°C
New series acc. to ISO 21287 characterised by a very short and compact design.
The standard type features a magnetic piston.
Piston rod optionally with male or female thread.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Service unit 2-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 1/2, Control range 0.5-10 bar, Fully
Two-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Storz coupling, Hose supports, rotating, Aluminium, Storz size 52-C, I.D. 38, Operating pressure max. 16 bar, Temp. -40°C to 110°C
High-quality series in forged aluminium. For quick and simple hose connections.
User friendly; the coupling elements are joined without damaging the seal.
Applications: Water lines, industrial plant engineering, firefighting.

Pressure regulator »Standard-mini«, incl. pressure gauge and control panel nut, G 1/4, Input pressure max. 25 bar, 0.2 - 6 bar
Compact, reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design.
The pressure setting can be locked by pushing the knob down.

T-fitting, Pipe exterior Ø 6 mm, PN bar 100, AF1 12, AF2 9, galvanised steel
Branch tee, very light type

Straight push-in connector »Blue Series« mini, reducing, for hose exterior Ø 4/3 mm, Working pressure max. 10 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
Space-saving miniature design.

Kamlok closing cap for quick-connect plug, DC type, Aluminium, Size 2, for plug Ø 63 mm, Pressure max. 16 bar, Temp. max. 68 °C
Coupling system for quick and easy connection of two hoses or for joining one hose to a machine connection.

A male part and a female part are joined together by shifting the handles.
There is no need to turn the hose!

Kamlok couplings are used for a wide range of applications in industrial plant and mechanical engineering, tank and container construction, the chemical industry, food processing, mining, refuelling systems, defence technology, etc.

Push-in L-fitting »Blue Series«, Self-locking, G 1/8 o., for hose exterior Ø 8 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

As long as stock lasts. Subject to prior sale.
Due to stock clearing, the items are excluded from return.
The warranty obligation is not affected.

1 m 300 mm
NAI0300R0120PA
SKU: NAI0300R0120PA
Stock: 0
Thickness: 2 mm
Holding force: 5.5 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides clearance C3
Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request.
Article ID: 608-2RS-C3-MAE

Trapeziodal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start right material 1.4305 rolled
Material: 1.4305. Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken.
Article ID: 64099212

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, centric, G 1/4, Meas. range -1 / +1.5 bar, Ø63
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Spiral hose coupling set, Standard coupling I.D. 7.2, Nylon 11 PA, Hose Ø 11.8x9.5, PN at 23 °C max. 11 bar, Length 2.5 m
These hoses allow gaseous and liquid media to flow safely and efficiently (Air, gases, oils, greases, fuels, organic and inorganic substances).

Thanks to their small coil diameter, they are compact, easy to handle and lightweight.
Very good recoil force owing to the use of nylon 11 (PA).

Not suitable for direct attachment to pulsating tools.
We recommend using our vibration dampers, according to ISO 6150 § 7.1.

Service unit 2-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 1/2, Control range 0.5-16 bar, Fully
Two-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Metered air gun 90 mm pipe, Star-tip nozzle, POM, Connection thread Rc 1/4, Temp. -20 °C to 60 °C PN max. 16 bar, Rc 1/4 IT
With noise-reducing Star-Tip nozzle.
Ergonomic grip with a very high blowing force. Several possible hanging points thanks to the modified handle. Robust yet lightweight for a long service life. With its ergonomic design, the gun can be used by both left and right-handed users!

Pressure regulator »Standard-mini«, incl. pressure gauge and control panel nut, G 1/4, Input pressure max. 25 bar, 0.5 - 10 bar
Compact, reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design.
The pressure setting can be locked by pushing the knob down.

Throttle check valve »Blue Series«, Supply air throttle, R 1/4 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Straight push-in fitting »metallica«, G 1/4 i., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Male elbow, M14x1.5 tapered o., Pipe exterior Ø 8 mm, PN max. 630 bar, a/f1 19, a/f2 14, galvanised steel

Reducing nipple, Long type G 1/8 o., G 1/8 i., AF 14 Nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C
Suitable for air, water, oil, steam, etc.

Set-screw coupling TR bore 40mm without keyway stainless steel 1.4305
Material: Stainless steel 1.4305.

These couplings do not allow any shaft displacement in axial or radial
direction. They should therefore only be used with perfectly alligned
shafts.

Bore tolerance: +0,05 mm. The torques in the table are maximum values
for couplings with keyway. The calculations based on feather-key
connection.

For couplings without keyway: The transmittable torque is lower and
depends on how far the set screws penetrate the shaft.

Article ID: 60099140

0.5 mm 30 m
Y0620R300501
SKU: Y0620R300501
Stock: 0
Printing technique: Screen print, Eco solvent, UV ink
Self-adhesive: No
Ferrous film is the ideal surface for magnets.It forms - in combination with magnetic sheet - the ideal base for in-store graphics and advertising, wall coverings, exhibition and stand construction, memoboard or presentation walls.Ferrous film - foil that contains iron or metal - is available with or without a printable layer, self-adhesive or not. Let us know your application and we will be happy to advise you of the possibilities.

Good to print
Suitable for advertising and promotion
Ideal as a basis for magnets
Suitable for graphics and in-store-retail

Application

What are the applications for ferrous film?

Ferrous film forms an ideal combination with magnets and magnetic sheet.
It is flexible and allows for easy trimming, cutting, plotting, or punching.
The metal foil has no sharp edges or corners and is safe to handle. It is applicable on both flat and curved surfaces. Ferrous film is water resistant but not waterproof. For indoor use.
As an optional extra, a special topcoat will make the ferrous film suitable for printing.
 
Applications: graphic prints and in-store communications, wall coverings, stand construction, magnetic advertising, and technical applications.

Composition

What is ferrous film made of?

Ferrous film is made of unmagnetized iron powder, composite rubber and other materials.
Our film is free of hazardous chemicals or heavy metals.
Rolling creates a thin flexible film. Ferrous film is standard dark brown in colour. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store ferrous film

Store ferrous film in closed packaging, horizontally at temperatures between 10 and 30 °C. Humidity between 30% and 60%. Keep ferrous film out of direct sunlight.
Shelf life is 12 months.
Process metal foil at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Apply metal foil only at a maximum daytime temperature changes of 40 °C.
Process material in opened packaging within 1 month.

FAQs

Metal foil FAQs

If you have a question, we’d be glad to answer it. E-mail or call one of our staff: +31 (0)40 221 3283.

Shaft collar DIN 705 A set screw with slot bore 16mm black finishing
Light-duty series. With set screw DIN EN 27 434 made from steel with black oxide finish. From size d1=80mm with 2 allen screws like DIN EN ISO 4027, but strength 12.9, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC.
Article ID: 62389016

One-piece clamp coupling MAS both sides bore 40mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9
Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of nylon. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Article ID: 60074000

Trapeziodal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start left material 1.4305 rolled
Material: 1.4305. Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken.
Article ID: 64099612

Pressure regulator for potable water, DVGW tested, incl. pressure gauge, Transparent sieve cup, R 3/4, Control range 1.5 - 6 bar
Diaphragm pressure regulators with pressure-reduced single-seated valve and built-in strainer.
These pressure regulators, which are independent of inlet pressure, protect domestic water installations against
excessive supply pressure. They can also be used for commercial or industrial purposes providing their
specification is adequate.

Round cylinder, ISO 6432, double-acting, Magnet, Piston Ø 20, Stroke 200, G 1/8, Working pressure max. 10 bar, Temp. -10°C to 80°C
Single and double-acting cylinders, with magnetic piston.
Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Service unit 2-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 3/8, Control range 0.5-8 bar, Fully
Two-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Elbow 1a, short, 90°, IT/ET, Rp/R 2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Pressure regulator »Standard-mini«, incl. pressure gauge and control panel nut, G 1/8, Input pressure max. 25 bar, 0.2 - 6 bar
Compact, reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design.
The pressure setting can be locked by pushing the knob down.

Throttle check valve »Blue Series«, Discharge throttle, R 1/4 o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Push-in L-fitting »Blue Series« long, rotating, R 1/4 o., for hose exterior Ø 8 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Bi-metallic thermometer for heating, Connection rear, G 1/2, Immersion shaft length 40 mm, Ø 63 mm, Display range 0 °C to 60 °C
Applications: Heating, plumbing, universal.

Double hose connector, for hose I.D. 6, nickel-plated brass CW614N, Max. working pressure 16 bar, Max. medium/ambient temp. 90 °C

0.5 mm 10 m
Y1270R100501SA
SKU: Y1270R100501SA
Stock: 0
Printing technique: UV ink, Eco solvent, Screen print
Self-adhesive: Yes (silicon layer)
Ferrous film is the ideal surface for magnets.It forms - in combination with magnetic sheet - the ideal base for in-store graphics and advertising, wall coverings, exhibition and stand construction, memoboard or presentation walls.Ferrous film - foil that contains iron or metal - is available with or without a printable layer, self-adhesive or not. Let us know your application and we will be happy to advise you of the possibilities.

Good to print
Suitable for advertising and promotion
Ideal as a basis for magnets
Suitable for graphics and in-store-retail

Application

What are the applications for ferrous film?

Ferrous film forms an ideal combination with magnets and magnetic sheet.
It is flexible and allows for easy trimming, cutting, plotting, or punching.
The metal foil has no sharp edges or corners and is safe to handle. It is applicable on both flat and curved surfaces. Ferrous film is water resistant but not waterproof. For indoor use.
As an optional extra, a special topcoat will make the ferrous film suitable for printing.
 
Applications: graphic prints and in-store communications, wall coverings, stand construction, magnetic advertising, and technical applications.

Composition

What is ferrous film made of?

Ferrous film is made of unmagnetized iron powder, composite rubber and other materials.
Our film is free of hazardous chemicals or heavy metals.
Rolling creates a thin flexible film. Ferrous film is standard dark brown in colour. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store ferrous film

Store ferrous film in closed packaging, horizontally at temperatures between 10 and 30 °C. Humidity between 30% and 60%. Keep ferrous film out of direct sunlight.
Shelf life is 12 months.
Process metal foil at a temperature between 15 and 30 °C and a humidity of 30% to 60%. Apply metal foil only at a maximum daytime temperature changes of 40 °C.
Process material in opened packaging within 1 month.

FAQs

Metal foil FAQs

If you have a question, we’d be glad to answer it. E-mail or call one of our staff: +31 (0)40 221 3283.

Clevis DIN 71752 size 6 x 24 left handed steel zinc-plated
Material: Steel zinc-plated. Design G: without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevis with ES-bolt can be used as clevis joint. * Size 20 is not part of the DIN.
Article ID: 63730600

Slide set DZ 3607 slide length 457mm zinc plated
Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607

timing bar AT10 23 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16892300

Glycerine pressure gauge, bracket fastening, triangle front ring, Connection, rear, centric, G 1/4, Meas. range -1 / +3 bar, Ø 63
Bourdon-tube pressure gauge in standard design, with clamp fixing.

For measurements in areas with high, dynamic pressure loads and vibration levels.
Suitable for gaseous or liquid media which do not corrode copper alloy,
do not have high viscosity and do not crystallise.

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 40, Stroke 75, G 1/8, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Service unit 2-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 1/2, Control range 0.5-8 bar, Fully
Two-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Double threaded nipple, R 3/8 o., R 3/8 o., Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Pressure regulator »Standard-mini«, incl. pressure gauge and control panel nut, G 1/4, Input pressure max. 25 bar, 0.1 - 3 bar
Compact, reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design.
The pressure setting can be locked by pushing the knob down.

Throttle check valve »Blue Series«, Supply air throttle, R 1/4 o., for hose exterior Ø 12 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Cover panel for base plate G 3/8 for connection face G 1/4
Light alloy manifold bases for 2 to 10 valve positions.

Plug connector for pressure switches with bayonet coupling

Plug nipple »Blue Series«, reducing, plug nipple 8/4 mm, Working pressure max. 15 bar, Plastic
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

6 mm Neodymium (NdFeB)
PM-BA-N-SG-D6x4.5
SKU: GM17401
Stock: 15
Holding force: 5 N
Height: 4.5 mm
Material housing: Galvanized steel
Compact flat magnet systems available in neodymium, samarium cobalt, ferrite and AlNiCo. Suitable for gluing. Thanks to the shell of these magnet systems, the magnetic field strength increases and the pot magnets are more resistant to corrosion or chemicals. Pot magnets have a single attracting surface. This precludes dispersion of the magnetic field.The specified holding forces are measured under optimum conditions: perpendicular, on a piece of grade 37 steel that has been ground flat with a thickness of 5 mm, without an air gap.

Deliverable from stock
Available in various sizes
Available with extra strong magnet

Construction of NdFeb pot magnets

What does a neodymium pot magnet consist of?

These super-strong pot magnets are made of the alloy neodymium-iron-boron - (NdFeB) - which Goudsmit markets under the brand name Neoflux®. The shell provides magnetic shielding. Goudsmit supplies neodymium pot magnets with a brass or steel shell. The holding surface is covered with a protective coating to prevent corrosion.

Operating temperature

When does loss of magnetic strength occur?

Neodymium cylindrical, flat pot magnets have a maximum operating temperature of up to 80 °C. When heated to this temperature, the magnet loses 15 to 20% of its magnetic force. This is not permanent; the force is restored when the magnet returns to the normal ambient temperature.
External magnetic fields may also cause loss of magnetic force. An air gap or non-magnetic materials located between the magnet and workpiece reduce the tensile force.

Important to know

Magnetic short circuit

To prevent loss of holding force due to magnetic short-circuit, neodymium magnets with a brass shell may not be pressed directly into steel. Always maintain a minimum distance between the brass shell of the pot magnet and the steel. Contact Goudsmit for specific recommendations.
E-mail or call +31 (0)40 221 3283.

Clevis joint similar DIN 71752 size 5 x 10 type KL right handed aluminum black anodized
Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed.
Article ID: 63766003

Two-piece clamp coupling MAT both sides bore 40mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9
Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of nylon. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft.
Article ID: 60094000

Bevel gear made of steel module 2 60 teeth i=4:1 milled
Material: up to module 2: 11SMnPb30. From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Article ID: 36109300

Round cylinder »MI« ISO 6432, double-acting, Piston Ø 25, Stroke 350, G 1/8, Working pressure 1 - 10 bar, Temp. -20 °C to 70 °C
These round cylinders are available in the following versions:
- »MI« Series, double-acting, Ø 8 to 25 acc. to ISO 6432
- »MI« Series, double-acting, Ø 32 to 40
- »MSI« Series, single-acting, pressureless in the retracted position, Ø 32 to 40

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

»CA« type = bottom cover with male thread – hinge model?»CM« type = bottom cover with male thread, round – hinge model

3-way ball valve, T-hole, nickel-plated brass, Medium / ambient temp. -15 °C to 100 °C, Rp 1 1/2, DN 40, PN max. 16 bar
The medium can enter via any of the ports to allow several switching variants.

3-way ball valves for diverting media.

Male elbow, NPT 1/8 o., Pipe exterior Ø 6 mm, PN max. 315 bar, a/f1 14, a/f2 12, galvanised steel
Male elbow, NPT thread, light type

Pressure regulator »Standard-mini«, incl. pressure gauge and control panel nut, G 1/4, Input pressure max. 25 bar, 0.5 - 16 bar
Compact, reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design.
The pressure setting can be locked by pushing the knob down.