Bushing 240, reducing, IT/IT, Rp 1 1/2, Rp 1, black malleable iron fitting, Operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Flange fastening, »FA« type for short stroke cylinder »ACQ« and »ASQ«, Piston Ø 63
Flange model, »FA« type

Double hose connector, for hose I.D. 10 mm, Brass CW614N, Max. working pressure 16 bar, Max. medium/ambient temp. 90 °C

Adjusting ring DIN 705 A set screw with hexagon socket bore 75mm stainless steel 1.4305
Material: 1.4305.Light-duty series. With set screw DIN EN 27 434 made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC,
Article ID: 623990756

0.8 mm 10 m
FII0620R100801
SKU: FII0620R100801
Stock: 0
Roll width: 620 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

hose clamp DIN 3017-1 type W4 stainless steel 1.4301 diameter range 16-27mm band width 9mm
Material: Stainless steel 1.4301 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request.
Article ID: 63814027

V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 315mm
Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement.

Article ID: 15413100

timing bar HTD 3M 66 teeth length 200mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 17096600

Short stroke cylinder »ACQ« double-acting, Magnet, Piston Ø 50, Stroke 5, G 1/4, Working pressure 1-10 bar, Temp. -20°C to 70°C
Suitable for installation in limited spaces.
Supplied with magnet.
Short-stroke cylinders in two different versions:
»ACQ« Series, double-acting, Ø 12 to 100
»ASQ« Series, single-acting, Ø 12 to 63

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

Standard cylinder »SE« ISO 15552, double-acting, Piston Ø 63, Stroke 600, G 3/8, Working pressure 1 - 10 bar, Temp. -20°C to 70°C
These cylinders are ideal for a wide range of applications owing to their robust design and ecxellent value for money.
The standard type has a double-acting cylinder and features a magnetic piston as well as integrated cushioning.
The magnetic switches are mounted in T-slots on three sides of the body.

Suitable for filtered, unlubricated or lubricated compressed air.
If lubrication is used, it must be continuous.

3/2-way valve »Blue Series«, R 3/8 o., R 3/8 o., with thread coating, Working pressure max. 15 bar, Plastic / nickel-plated brass
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Full stroke safety valve DN 8, Brass, Operating temperature -25 °C to 180 °C, G 1/4, AF 20, Trigger pressure 46 bar, Type tested
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Push-in L-fitting »metallica«, rotating, R 3/8 o., for hose exterior Ø 10 mm, Working pressure max. 16 bar, nickel-plated brass
All parts with a parallel thread are supplied with an FPM O-ring while the conical threads are coated with preCOTE 5 dispersion; all fittings in this series can thus also be used at high temperatures (medium compressed
air).

Double threaded nipple 245, reducing, R 1 1/4 ET, R 1 ET, black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1
According to DIN EN 10242 (previously 2950).
Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Nipple for pushbutton safety couplings I.D. 8, ISO 6150 C, Stainless steel, G 3/8 IT, max. 16 bar, Temp. -20 °C to 200 °C

Flat sealing ring made of PTFE, G 1/2, EN 837

Adjusting ring DIN 705 A set screw with hexagon socket bore 80mm stainless steel 1.4305
Material: 1.4305.Light-duty series. With set screw DIN EN 27 434 made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC,
Article ID: 623990806

1 mm 10 m
FII0620R101001
SKU: FII0620R101001
Stock: 0
Roll width: 620 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

Knurled thumb screw 421 M4 x 10mm long set screw steel zinc plated
Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue

Article ID: 65377000

Mounting device module 3 19°31'42" left handed for gear racks 253603xx, 253605xx and 253609xx
Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting.

Article ID: 25360000

Rod end GS DIN 12240-4 series K internal thread M36x2 right == Initial lubrication required before use ==
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use
Article ID: 63203500

5/3-way valve man. 90° lever bistable mid-position exhaustedG1/4 Operating pressure max. vacuum 10bar Operating temp.-10°C to 60°C
These pilot valves are also suitable for max. vacuum 10 bar.

Service unit 2-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 3/8, Control range 0.1-1 bar, Fully
Two-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Screw-in hose connector G 3/8 o. for hose I.D. 6 Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Full stroke safety valve DN 8, Brass, Operating temperature -25 °C to 180 °C, G 1/4, AF 20, Trigger pressure 42 bar, Type tested
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Push-in L-fitting »Blue Series«, rotating, G 3/8 i./o., for hose exterior Ø 10 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Reducing nipple short type G 3/4 o., G 1/2 i. AF 32 nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C
Suitable for air, water, oil, steam, etc.

Straight push-in bulkhead connector »Blue Series«, Self-locking, M20x1.5, for hose exterior Ø 10 mm, Working pressure max. 10 bar
The air supply is completely shut off as soon as the hose is disconnected from the union.
The flow rate is only guaranteed if the hose is securely inserted.

Nipple for couplings I.D. 2.7, bright brass, for hose 6x4, AF 8, Operating pressure 0 - 35 bar, Med./ambient temp. -20°C to 100°C

Adjusting ring DIN 705 A set screw with hexagon socket bore 85mm stainless steel 1.4305
Material: 1.4305.Light-duty series. With set screw DIN EN 27 434 made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC,
Article ID: 623990856

1 mm 10 m
FII1020R101001
SKU: FII1020R101001
Stock: 0
Roll width: 1020 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

Knurled thumb screw 421 M4 x 15mm long set screw steel zinc plated
Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue

Article ID: 65377200

V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 250mm
Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement.

Article ID: 15032500

Rod end GS DIN 12240-4 series K internal thread M36x2 left == Initial lubrication required before use ==
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use
Article ID: 63213500

Bushing - blocking valve, Stainless steel 1.4401/1.4408, Medium / ambient temperature max. 160 °C, G 3/4, DN 20, PN max. 14 bar

Service unit 2-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 3/8, Control range 0.1-2 bar, Fully
Two-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Screw-in hose connector G 3/8 o. for hose I.D. 9 Stainless steel 1.4571, Max. working pressure 60 bar, Max. operating temp. 150 °C

Full stroke safety valve DN 8, Brass, Operating temperature -25 °C to 180 °C, G 1/4, AF 20, Trigger pressure 43 bar, Type tested
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Silencer with spring setting, G 1/2, AF 22, Operating pressure max. 12 bar, Operating temperature -10 °C to 80 °C

Bushing 240, reducing, IT/IT, Rp 1 1/4, Rp 1/2, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Removable Double threaded nipple, flat sealing, G 1/2 i., AF1 39, AF2 26, Working pressure max. 10 bar, Stainless steel 1.4408

Straight push-in fitting »Blue Series«, M5 i., for hose exterior Ø 4 mm, Working pressure max. 15 bar
Push-in fittings series manufactured in plastic and nickel-plated brass.
All parts are suitable for use with hoses, tubes or pipes made of plastic and copper.

Adjusting ring DIN 705 A set screw with hexagon socket bore 90mm stainless steel 1.4305
Material: 1.4305.Light-duty series. With set screw DIN EN 27 434 made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC,
Article ID: 623990906

0.6 mm 10 m
FII1000R100601P
SKU: FII1000R100601P
Stock: 0
Roll width: 1000 mm
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

Knurled thumb screw 421 M4 x 20mm long set screw steel zinc plated
Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue

Article ID: 65377400

timing bar AT3 96 teeth length 160mm material aluminium
Material: Aluminium similar EN AW2017A.
Article ID: 16399600

Rod end GS DIN 12240-4 series K external thread M36x2 right == Initial lubrication required before use ==
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use
Article ID: 63223500

Bushing - locking pusher, without spindle stroke, Brass, Medium temperature max. 120 °C, G 2, DN 50, PN max. 16 bar
Opening / closing without stem stroke

Service unit 2-part »FUTURA« with PC container, Protective cage and pressure gauge, Size 2, G 3/8, Control range 0.2-4 bar, Fully
Two-piece service units with excellent flow rates in modern design.
Lockable diaphragm pressure regulator with secondary ventilation, oil can be filled without interrupting operation.

Pipe double nipple, G 1, Length 120 mm, Working pressure max. 10 bar, Medium / ambient temperature max. 90 °C, Bright brass

Full stroke safety valve DN 8, Brass, Operating temperature -25 °C to 180 °C, G 1/4, AF 20, Trigger pressure 44 bar, Type tested
For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam.
These valves are TÜV approved and have a TÜV type test number.

Jaw coupling with hose connection, I.D. 25 (1"), with safety collar, Malleable cast iron, galvanised and yellow passivated
Universal standard coupling for compressed air lines on construction sites or in industry; standard type according to DIN 3489, used worldwide in a very wide range of applications.

- Robust couplings made of malleable iron, zinc plated and yellow chromated
- Chrome VI-free, with double safety lock
- 100% couple test and secure connection

Bracket 90, 90°, IT/IT, Rp 1 1/4, Operating temp. -20°C to 300°C, black malleable cast iron, Hot-dip galvanised, DIN EN 10242
Acc. to DIN EN 10242 (formerly DIN 2950)

The classic - and the most popular - screw fitting series for pipe construction.
These fittings are characterized by their high mechanical strength and surface quality to DIN 2444.
They are completely coated with a layer of pure zinc and are therefore suitable for drinking water; they are also protected against rust.
These malleable iron fittings are used in machine construction, exterior lines, cold water lines and heating lines.

Working minimal temperature = -20 °C; 25 bar.
Working pressure for temperature range from -20 °C to 120 °C: 25 bar.
Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Rem. Double threaded nipple, Interior / exterior thread, con. sealing, G 1/2, Working pressure max. 10 bar, Stainless steel 1.4408

Reducing nipple, Short design, G 1/2 ET, G 3/8 IT, AF 24, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C

Adjusting ring DIN 705 A set screw with hexagon socket bore 100mm stainless steel 1.4305
Material: 1.4305.Light-duty series. With set screw DIN EN 27 434 made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC,
Article ID: 623991006

5 m 10 mm
NAI0010R0510PA
SKU: NAI0010R0510PA
Stock: 0
Thickness: 1 mm
Holding force: 2.85 N
Because every application requires a different flexible magnetic sheet, we have various magnetic films and the knowledge to provide the right advice. Magnetic sheet with or without white top layer, self-adhesive or not, extra high magnetic force, thin or thick. For indoor and outdoor use.The question remains, what do you want to use magnetic sheet for? Let us know and we’d be glad to advise you on the right magnetic sheet for your application.

Punch, cut, plot or slice
Resistant to water and UV radiation
Suitable for advertising and promotion
Suitable for graphics and in-store-retail
Moveable, reusable and non-scratch

Application

What can I use magnetic sheet for?

Magnetic sheet attaches to any steel surface, such as a car or warehouse shelving. The material is flexible and allows for easy trimming, cutting, plotting or punching. The magnetic properties are retained. Because it is so easy to bend, it adheres to both flat and curved surfaces.
The magnetic side has a UV coating. This prevents scratches on the surface.
Magnetic sheet is suitable for digital printing and screen-printing. Optionally, a special topcoat makes the magnetic sheet writeable with chalk or a whiteboard pen, and is dry erasable.
 
Applications: graphic prints and in-store communication, wall coverings, stand construction, warehouse shelving, signage, magnetic advertising, POS materials, planning boards, technical and industrialëapplications.

Composition

What is magnetic sheet?

Magnetic sheet is made of magnetic powder, composite rubber and other materials.
Our magnetic sheet is free of hazardous chemicals or heavy metals. It complies with the EN71 standard and RoHS.
 
Extrusion, rolling or injection are processing techniques of rubber bonded magnetic powder. This creates soft, plastic-bound and flexible magnets such as magnetic sheet on a roll, magnetic strip in special shapes. The standard magnetic sheet colour is dark brown. If desired, a coloured top layer of vinyl, a sticker or another top layer is possible.

Storage and processing

How to store magnetic sheet

Store magnetic sheet in closed packaging, horizontally at a temperature between 10 and 30 °C. The humidity should be between 20% and 70%. Keep magnetic sheet out of direct sunlight.
Shelf life is 12 months.
 
The material can be rolled up at a temperature of 20 °C to a diameter of 12 mm without breaking. Always roll magnetic sheet with the coloured or adhesive side on the outside. This will prevent creasing and cracking in the top layer.
 
Process magnetic sheet at a temperature between 15 and 30 °C and humidity of 30% to 60%.
Process material in opened packaging within 1 month.
 
Magnetic sheet is easy to cut and punch with scissors, knife or cutting device.

FAQs

Magnetic sheet FAQs

Which magnetic sheet is suitable for car advertising?
A 0.8 mm thick magnetic sheet has sufficient adhesion for use on cars. Moreover, this material is very flexible for a good connection to a surface that is a little convex. All our foils are UV coated and do not scratch the surface, provided that they are applied on a clean and dry surface.
 
How do I clean magnetic sheet?
With a soft clean cloth and possibly water with detergent.
 
How much adhesive force does magnetic sheet have?
The strength of magnetic sheet is measured in a special test environment, perpendicular to the surface, with fixed factors such as steel thickness, steel grade and air gap. Thickness of the magnetic sheet, type of magnetic sheet, polarity and air gap are influencing factors. For technical and industrial applications, it is recommended to test the adhesive force.
 
Ask us for advice. Call one of our staff: +31 (0)40 221 3283 or send an e-mail.

Knurled thumb screw 421 M5 x 10mm long set screw steel zinc plated
Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue

Article ID: 65377600

Slide set DS 3557 slide length 610mm stainless steel 1.4301
Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings.

Article ID: 64903360

Rod end GS DIN 12240-4 series K external thread M36x2 left == Initial lubrication required before use ==
Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN 648 / 12240-4 series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use
Article ID: 63233500